[PATCH v5 01/10] ARM: dts: aspeed: catalina: Add IO Mezz board thermal sensor nodes

[Potin Lai]

Add thermal sensor nodes for the IO Mezzanine (IO Mezz) board in the
Catalina platform device tree. These nodes enable temperature monitoring
for the backend NIC, improving thermal management and monitoring
capabilities.

Signed-off-by: Potin Lai <potin.lai.pt at gmail.com>
---
 .../dts/aspeed/aspeed-bmc-facebook-catalina.dts    | 24 ++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
index c151984289bc..d5d99a945ee4 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
@@ -198,6 +198,12 @@ i2c0mux0ch0: i2c at 0 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
+
+			// IOB0 NIC0 TEMP
+			temperature-sensor at 1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
 		};
 		i2c0mux0ch1: i2c at 1 {
 			#address-cells = <1>;
@@ -208,6 +214,12 @@ i2c0mux0ch2: i2c at 2 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
+
+			// IOB0 NIC1 TEMP
+			temperature-sensor at 1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
 		};
 		i2c0mux0ch3: i2c at 3 {
 			#address-cells = <1>;
@@ -299,6 +311,12 @@ i2c0mux3ch0: i2c at 0 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
+
+			// IOB1 NIC0 TEMP
+			temperature-sensor at 1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
 		};
 		i2c0mux3ch1: i2c at 1 {
 			#address-cells = <1>;
@@ -309,6 +327,12 @@ i2c0mux3ch2: i2c at 2 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
+
+			// IOB1 NIC1 TEMP
+			temperature-sensor at 1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
 		};
 		i2c0mux3ch3: i2c at 3 {
 			#address-cells = <1>;

-- 
2.31.1