[PATCH v4 1/8] ARM: dts: aspeed: catalina: Add IO Mezz board thermal sensor nodes

[Potin Lai]

Add thermal sensor nodes for the IO Mezzanine (IO Mezz) board in the
Catalina platform device tree. These nodes enable temperature monitoring
for the backend NIC, improving thermal management and monitoring
capabilities.

Signed-off-by: Potin Lai <potin.lai.pt at gmail.com>
---
 .../dts/aspeed/aspeed-bmc-facebook-catalina.dts    | 24 ++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
index 3822bb3c9243..75c3906d9654 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
@@ -190,6 +190,12 @@ i2c0mux0ch0: i2c at 0 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
+
+			// IOB0 NIC0 TEMP
+			temperature-sensor at 1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
 		};
 		i2c0mux0ch1: i2c at 1 {
 			#address-cells = <1>;
@@ -200,6 +206,12 @@ i2c0mux0ch2: i2c at 2 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
+
+			// IOB0 NIC1 TEMP
+			temperature-sensor at 1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
 		};
 		i2c0mux0ch3: i2c at 3 {
 			#address-cells = <1>;
@@ -361,6 +373,12 @@ i2c0mux3ch0: i2c at 0 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
+
+			// IOB1 NIC0 TEMP
+			temperature-sensor at 1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
 		};
 		i2c0mux3ch1: i2c at 1 {
 			#address-cells = <1>;
@@ -371,6 +389,12 @@ i2c0mux3ch2: i2c at 2 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
+
+			// IOB1 NIC1 TEMP
+			temperature-sensor at 1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
 		};
 		i2c0mux3ch3: i2c at 3 {
 			#address-cells = <1>;

-- 
2.31.1