[PATCH v2 0/3] ARM: dts: aspeed: Add Balcones system

[Rob Herring]

On Fri, Feb 28, 2025 at 10:46 AM Eddie James <eajames at linux.ibm.com> wrote:
>
>
> On 2/24/25 22:34, Andrew Jeffery wrote:
> > On Fri, 2025-02-21 at 12:11 -0600, Rob Herring (Arm) wrote:
> >> On Thu, 20 Feb 2025 14:59:45 -0600, Eddie James wrote:
> >>> The Balcones system is similar to Bonnell but with a POWER11 processor.
> >>>
> >>> Changes since v1:
> >>>   - Add all the ucd9000 driver supported compatible strings
> >>>   - Fix node ordering in Balcones device tree
> >>>   - Improve commit message to explain addition of ibm-power11-dual.dtsi
> >>>
> >>> Eddie James (3):
> >>>    dt-bindings: arm: aspeed: add IBM Balcones board
> >>>    dt-bindings: hwmon: ucd90320: Add additional compatible strings
> >>>    ARM: dts: aspeed: Add Balcones system
> >>>
> >>>   .../bindings/arm/aspeed/aspeed.yaml           |   1 +
> >>>   .../bindings/hwmon/pmbus/ti,ucd90320.yaml     |   6 +
> >>>   arch/arm/boot/dts/aspeed/Makefile             |   1 +
> >>>   .../dts/aspeed/aspeed-bmc-ibm-balcones.dts    | 594 +++++++++++++
> >>>   .../arm/boot/dts/aspeed/ibm-power11-dual.dtsi | 779 ++++++++++++++++++
> >>>   .../arm/boot/dts/aspeed/ibm-power11-quad.dtsi | 769 +----------------
> >>>   6 files changed, 1383 insertions(+), 767 deletions(-)
> >>>   create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dts
> >>>   create mode 100644 arch/arm/boot/dts/aspeed/ibm-power11-dual.dtsi
> >>>
> >>> --
> >>> 2.43.5
> >>>
> >>>
> >>>
> >>
> >> My bot found new DTB warnings on the .dts files added or changed in this
> >> series.
> >>
> > ...
> >
> >> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: gpio at 1e780000: 'usb-power-hog' does not match any of the regexes: 'pinctrl-[0-9]+'
> >>          from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml#
> > Ah, can you address this one?
> >
> >> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: /ahb/apb/bus at 1e78a000/i2c at 400/pwm at 53: failed to match any schema with compatible: ['maxim,max31785a']
> >> arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dtb: pressure-sensor at 76: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
> >>          from schema $id: http://devicetree.org/schemas/trivial-devices.yaml#
> > And these also?
> >
> > The rest looked like the usual noise.
>
>
> Well, all of these errors are also present in Blueridge. I would need to
> write a new binding for dps310, move max31785 to yaml format, and I'm
> not sure how to fix the gpio hog one. I don't see that error when I run
> CHECK_DTBS myself... any suggestions?

I think the hog one got fixed recently. The tests run on top of
whatever b4 picks for the base or linux-next if it can't figure out
the base. So that might be the difference.

Rob