[PATCH v15 1/3] dt-bindings: i2c: aspeed: support for AST2600-i2cv2

Ryan Chen ryan_chen at aspeedtech.com
Fri Feb 21 19:25:53 AEDT 2025


Hello Krzysztof,
	I am going to submit v16, and will update the yaml file, in my this version will add aspeed,enable-byte.
	So, we should I do about this patch about " Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>" 
	Should I remove it ? or I should keep this Reviewed-by?


> -----Original Message-----
> From: Ryan Chen <ryan_chen at aspeedtech.com>
> Sent: Monday, October 7, 2024 11:53 AM
> To: brendan.higgins at linux.dev; benh at kernel.crashing.org; joel at jms.id.au;
> andi.shyti at kernel.org; robh at kernel.org; krzk+dt at kernel.org;
> conor+dt at kernel.org; andrew at codeconstruct.com.au;
> p.zabel at pengutronix.de; andriy.shevchenko at linux.intel.com;
> linux-i2c at vger.kernel.org; openbmc at lists.ozlabs.org;
> devicetree at vger.kernel.org; linux-arm-kernel at lists.infradead.org;
> linux-aspeed at lists.ozlabs.org; linux-kernel at vger.kernel.org; Ryan Chen
> <ryan_chen at aspeedtech.com>
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
> Subject: [PATCH v15 1/3] dt-bindings: i2c: aspeed: support for AST2600-i2cv2
> 
> Add ast2600-i2cv2 compatible and aspeed,global-regs, aspeed,enable-dma
> and description for ast2600-i2cv2.
> 
> Signed-off-by: Ryan Chen <ryan_chen at aspeedtech.com>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
> ---
>  .../devicetree/bindings/i2c/aspeed,i2c.yaml   | 51 +++++++++++++++++--
>  1 file changed, 48 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> index 6df27b47b922..6c16fc76c978 100644
> --- a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> +++ b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> @@ -9,9 +9,6 @@ title: ASPEED I2C on the AST24XX, AST25XX, and AST26XX
> SoCs
>  maintainers:
>    - Rayn Chen <rayn_chen at aspeedtech.com>
> 
> -allOf:
> -  - $ref: /schemas/i2c/i2c-controller.yaml#
> -
>  properties:
>    compatible:
>      enum:
> @@ -49,12 +46,50 @@ properties:
>      description:
>        states that there is another master active on this bus
> 
> +  aspeed,enable-dma:
> +    type: boolean
> +    description: |
> +      I2C bus enable dma mode transfer.
> +
> +      ASPEED ast2600 platform equipped with 16 I2C controllers that share
> a
> +      single DMA engine. DTS files can specify the data transfer mode
> to/from
> +      the device, either DMA or programmed I/O. However, hardware
> limitations
> +      may require a DTS to manually allocate which controller can use DMA
> mode.
> +      The "aspeed,enable-dma" property allows control of this.
> +
> +      In cases where one the hardware design results in a specific
> +      controller handling a larger amount of data, a DTS would likely
> +      enable DMA mode for that one controller.
> +
> +  aspeed,global-regs:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description: The phandle of i2c global register node.
> +
>  required:
>    - reg
>    - compatible
>    - clocks
>    - resets
> 
> +allOf:
> +  - $ref: /schemas/i2c/i2c-controller.yaml#
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: aspeed,ast2600-i2cv2
> +
> +    then:
> +      properties:
> +        reg:
> +          minItems: 2
> +      required:
> +        - aspeed,global-regs
> +    else:
> +      properties:
> +        aspeed,global-regs: false
> +        aspeed,enable-dma: false
> +
>  unevaluatedProperties: false
> 
>  examples:
> @@ -71,3 +106,13 @@ examples:
>        interrupts = <0>;
>        interrupt-parent = <&i2c_ic>;
>      };
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    i2c1: i2c at 80 {
> +      compatible = "aspeed,ast2600-i2cv2";
> +      reg = <0x80 0x80>, <0xc00 0x20>;
> +      aspeed,global-regs = <&i2c_global>;
> +      clocks = <&syscon ASPEED_CLK_APB>;
> +      resets = <&syscon ASPEED_RESET_I2C>;
> +      interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
> +    };
> --
> 2.34.1



More information about the Linux-aspeed mailing list