[PATCH RFC 05/16] ARM: dts: aspeed: Remove unspecified LPC host controller node

[Andrew Jeffery]

For the AST2500 the node was used for pinctrl purposes, and while the
hardware capability is also present in the AST2400 and AST2600, the
their pinctrl no relationship to it. Further, there's no corresponding
binding, remove the node for now to
eliminate the warnings.

Signed-off-by: Andrew Jeffery <andrew at codeconstruct.com.au>
---
 arch/arm/boot/dts/aspeed/aspeed-g4.dtsi | 5 -----
 arch/arm/boot/dts/aspeed/aspeed-g5.dtsi | 6 ------
 arch/arm/boot/dts/aspeed/aspeed-g6.dtsi | 5 -----
 3 files changed, 16 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
index c3d4d916c69b..c0a4057fa53f 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
@@ -376,11 +376,6 @@ lpc_snoop: lpc-snoop at 90 {
 					status = "disabled";
 				};
 
-				lhc: lhc at a0 {
-					compatible = "aspeed,ast2400-lhc";
-					reg = <0xa0 0x24 0xc8 0x8>;
-				};
-
 				lpc_reset: reset-controller at 98 {
 					compatible = "aspeed,ast2400-lpc-reset";
 					reg = <0x98 0x4>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
index 1456f04c2139..086c40fd12b8 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
@@ -504,12 +504,6 @@ uart_routing: uart-routing at 9c {
 					status = "disabled";
 				};
 
-				lhc: lhc at a0 {
-					compatible = "aspeed,ast2500-lhc";
-					reg = <0xa0 0x24 0xc8 0x8>;
-				};
-
-
 				ibt: ibt at 140 {
 					compatible = "aspeed,ast2500-ibt-bmc";
 					reg = <0x140 0x18>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
index f8662c8ac089..1ae816087f6b 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
@@ -624,11 +624,6 @@ lpc_snoop: lpc-snoop at 80 {
 					status = "disabled";
 				};
 
-				lhc: lhc at a0 {
-					compatible = "aspeed,ast2600-lhc";
-					reg = <0xa0 0x24 0xc8 0x8>;
-				};
-
 				lpc_reset: reset-controller at 98 {
 					compatible = "aspeed,ast2600-lpc-reset";
 					reg = <0x98 0x4>;

-- 
2.47.3