回覆: 回覆: [net] ARM: dts: aspeed: ast2600-evb: Correct phy-mode to rgmii-id

[Jacky Chou]

> >>> According to the latest ethernet-controller.yaml.
> >>> Since there is no RGMII delay on AST2600 EVB, the phy-mode property
> >>> of all MACs change to "rgmii-id" mode.
> >>>
> >>> Fixes: 4d338ee40ba8 ("ARM: dts: aspeed: ast2600-evb: Enable RX delay
> >>> for MAC0/MAC1")
> >>> Fixes: 2ca5646b5c2f ("ARM: dts: aspeed: Add AST2600 and EVB")
> >>> Signed-off-by: Jacky Chou <jacky_chou at aspeedtech.com>
> >>> ---
> >>>  arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts | 8 ++++----
> >>
> >> No, DTS cannot go to net. Why do you propose that?
> >>
> >
> > If there is a series of patches to add or fix about networking and
> > this series Includes dts or dt-binding, I send it to net or net-next.
> 
> No. That's really irrelevant. And if you change there I2C you send to I2C
> maintainers? That makes no sense.
> 
> You send it to respective maintainers. networking things go to netdev.
> SoC (so DTS) goes to SoC.
> 
> 
> > So, this is just changing the DTS settings, even if it is for MAC,
> > wouldn't it be sent to net?
> 
> You must follow what MAINTAINERS tell you. Don't invent your own rules.
> 

Got it. Thank you.
I will submit this patch again.

Thanks,
Jacky