[net] ARM: dts: aspeed: ast2600-evb: Correct phy-mode to rgmii-id

[Jacky Chou]

According to the latest ethernet-controller.yaml.
Since there is no RGMII delay on AST2600 EVB, the phy-mode property of all
MACs change to "rgmii-id" mode.

Fixes: 4d338ee40ba8 ("ARM: dts: aspeed: ast2600-evb: Enable RX delay for MAC0/MAC1")
Fixes: 2ca5646b5c2f ("ARM: dts: aspeed: Add AST2600 and EVB")
Signed-off-by: Jacky Chou <jacky_chou at aspeedtech.com>
---
 arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts
index de83c0eb1d6e..c4964e536ed7 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts
@@ -123,7 +123,7 @@ ethphy3: ethernet-phy at 0 {
 &mac0 {
 	status = "okay";
 
-	phy-mode = "rgmii-rxid";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy0>;
 
 	pinctrl-names = "default";
@@ -134,7 +134,7 @@ &mac0 {
 &mac1 {
 	status = "okay";
 
-	phy-mode = "rgmii-rxid";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy1>;
 
 	pinctrl-names = "default";
@@ -144,7 +144,7 @@ &mac1 {
 &mac2 {
 	status = "okay";
 
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy2>;
 
 	pinctrl-names = "default";
@@ -154,7 +154,7 @@ &mac2 {
 &mac3 {
 	status = "okay";
 
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy3>;
 
 	pinctrl-names = "default";
-- 
2.34.1