[PATCH v1] ARM: dts: aspeed: yosemite4: Enable interrupt setting for pca9555

[Krzysztof Kozlowski]

On 18/09/2024 05:12, Delphine_CC_Chiu/WYHQ/Wiwynn wrote:
> 
> 
>> -----Original Message-----
>> From: Krzysztof Kozlowski <krzk at kernel.org>
>> Sent: Monday, September 16, 2024 4:51 PM
>> To: Delphine_CC_Chiu/WYHQ/Wiwynn <Delphine_CC_Chiu at wiwynn.com>;
>> patrick at stwcx.xyz; Rob Herring <robh at kernel.org>; Krzysztof Kozlowski
>> <krzk+dt at kernel.org>; Conor Dooley <conor+dt at kernel.org>; Joel Stanley
>> <joel at jms.id.au>; Andrew Jeffery <andrew at codeconstruct.com.au>
>> Cc: Ricky CX Wu <ricky.cx.wu.wiwynn at gmail.com>;
>> devicetree at vger.kernel.org; linux-arm-kernel at lists.infradead.org;
>> linux-aspeed at lists.ozlabs.org; linux-kernel at vger.kernel.org
>> Subject: Re: [PATCH v1] ARM: dts: aspeed: yosemite4: Enable interrupt setting
>> for pca9555
>>
>>  [External Sender]
>>
>>  [External Sender]
>>
>> On 10/09/2024 10:20, Delphine_CC_Chiu/WYHQ/Wiwynn wrote:
>>> I will revise in v2. Thanks!
>>>>> +             interrupt-parent = <&gpio0>;
>>>>> +             interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
>>>>> +             gpio-line-names =
>>>>> +             "P48V_OCP_GPIO1","P48V_OCP_GPIO2",
>>>>
>>>> Nothing improved here. I already commented about above and this.
>>>> Implement feedback for all your patches, not only one.
>>>>
>>>> Best regards,
>>>> Krzysztof
>>> Sorry about that.
>>> I saw you say "Broken alignment" in v15 patch.
>>> Would like to ask if the following format meets your expectations?
>>> +                     gpio-line-names =
>>> +                             "P48V_OCP_GPIO1",
>> "P48V_OCP_GPIO2",
>>> +                             "P48V_OCP_GPIO3",
>>> + "FAN_BOARD_0_REVISION_0_R",
>>
>> Please read DTS coding style before posting next version of the patch (or any
>> patch for DTS). This is still not aligned. There is (almost) never a blank line
>> after '='.
>>
>> Best regards,
>> Krzysztof
> Hi Krzysztof,
> After checking the DTS coding style, I found the "Indentation" section mentioned that:
> "For arrays spanning across lines, it is preferred to align the continued entries with opening < from the first line."
> 
> Should I align the code with following format? (No blank line after = and use two space to align the ")
> Or would like to ask could you help to provide the dts file that I can follow?

Sure, e.g. qcom/sm8650.dtsi, line 765 or line 796.

Or arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi and
gpio-line-names.

Best regards,
Krzysztof