[PATCH v1] ARM: dts: aspeed: yosemite4: Add power module and ADC on Medusa Board

[Andrew Jeffery]

Hi Ricky,

On Tue, 2024-09-10 at 09:15 -0500, Rob Herring (Arm) wrote:
> On Tue, 10 Sep 2024 15:53:56 +0800, Delphine CC Chiu wrote:
> > From: Ricky CX Wu <ricky.cx.wu.wiwynn at gmail.com>
> > 
> > Add RTQ6056 as 2nd source ADC sensor on Medusa Board.
> > Add power sensors on Medusa board:
> > - Add XDP710 as 2nd source HSC to monitor P48V PSU power.
> > - Add MP5023 as P12V efuse (Driver exists but un-documented).
> > - Add PMBUS sensors as P12V Delta Module.
> > 
> > Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn at gmail.com>
> > Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu at wiwynn.com>
> > ---
> >  .../aspeed/aspeed-bmc-facebook-yosemite4.dts  | 45 ++++++++++++++++++-
> >  1 file changed, 43 insertions(+), 2 deletions(-)
> > 
> 
> 
> My bot found new DTB warnings on the .dts files added or changed in this
> series.
> 
> Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
> are fixed by another series. Ultimately, it is up to the platform
> maintainer whether these warnings are acceptable or not. No need to reply
> unless the platform maintainer has comments.
> 
> If you already ran DT checks and didn't see these error(s), then
> make sure dt-schema is up to date:
> 
>   pip3 install dtschema --upgrade
> 
> 
> New warnings running 'make CHECK_DTBS=y aspeed/aspeed-bmc-facebook-yosemite4.dtb' for 20240910075357.3531211-1-Delphine_CC_Chiu at wiwynn.com:
> 
> arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dtb: /ahb/apb/bus at 1e78a000/i2c at 600/power-sensor at 40: failed to match any schema with compatible: ['mps,mp5023']
> arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dtb: /ahb/apb/bus at 1e78a000/i2c at 600/power-sensor at 62: failed to match any schema with compatible: ['pmbus']
> arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dtb: /ahb/apb/bus at 1e78a000/i2c at 600/power-sensor at 64: failed to match any schema with compatible: ['pmbus']
> arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dtb: /ahb/apb/bus at 1e78a000/i2c at 600/power-sensor at 65: failed to match any schema with compatible: ['pmbus']
> arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dtb: /ahb/apb/bus at 1e78a000/i2c at 600/power-sensor at 68: failed to match any schema with compatible: ['pmbus']

Can you please either:

1. Drop these nodes so we're not adding more warnings, or
2. Write the appropriate bindings and send them in a v2?

Andrew