[PATCH v15 28/32] ARM: dts: aspeed: yosemite4: fix GPIO linename typo
Delphine CC Chiu
Delphine_CC_Chiu at wiwynn.com
Fri Sep 6 16:26:54 AEST 2024
Fix GPIO linename typo and add missing GPIO pin initial state.
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu at wiwynn.com>
---
.../aspeed/aspeed-bmc-facebook-yosemite4.dts | 554 ++++++++++++++----
1 file changed, 455 insertions(+), 99 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index abd4a9173de4..4090725160f9 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -285,6 +285,8 @@ &mac2 {
pinctrl-0 = <&pinctrl_rmii3_default>;
use-ncsi;
mellanox,multi-host;
+ ncsi-ctrl,start-redo-probe;
+ ncsi-ctrl,no-channel-monitor;
};
&mac3 {
@@ -293,6 +295,8 @@ &mac3 {
pinctrl-0 = <&pinctrl_rmii4_default>;
use-ncsi;
mellanox,multi-host;
+ ncsi-ctrl,start-redo-probe;
+ ncsi-ctrl,no-channel-monitor;
};
&fmc {
@@ -327,6 +331,13 @@ mctp at 10 {
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
};
+ gpio at 24 {
+ compatible = "nxp,pca9506";
+ reg = <0x24>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
gpio at 21 {
compatible = "nxp,pca9506";
reg = <0x21>;
@@ -348,13 +359,6 @@ gpio at 23 {
#gpio-cells = <2>;
};
- gpio at 24 {
- compatible = "nxp,pca9506";
- reg = <0x24>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
power-sensor at 40 {
compatible = "adi,adm1281", "mps,mp5990";
reg = <0x40>;
@@ -373,6 +377,13 @@ mctp at 10 {
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
};
+ gpio at 24 {
+ compatible = "nxp,pca9506";
+ reg = <0x24>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
gpio at 21 {
compatible = "nxp,pca9506";
reg = <0x21>;
@@ -394,13 +405,6 @@ gpio at 23 {
#gpio-cells = <2>;
};
- gpio at 24 {
- compatible = "nxp,pca9506";
- reg = <0x24>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
power-sensor at 40 {
compatible = "adi,adm1281", "mps,mp5990";
reg = <0x40>;
@@ -419,6 +423,13 @@ mctp at 10 {
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
};
+ gpio at 24 {
+ compatible = "nxp,pca9506";
+ reg = <0x24>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
gpio at 21 {
compatible = "nxp,pca9506";
reg = <0x21>;
@@ -440,13 +451,6 @@ gpio at 23 {
#gpio-cells = <2>;
};
- gpio at 24 {
- compatible = "nxp,pca9506";
- reg = <0x24>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
power-sensor at 40 {
compatible = "adi,adm1281", "mps,mp5990";
reg = <0x40>;
@@ -465,6 +469,13 @@ mctp at 10 {
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
};
+ gpio at 24 {
+ compatible = "nxp,pca9506";
+ reg = <0x24>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
gpio at 21 {
compatible = "nxp,pca9506";
reg = <0x21>;
@@ -486,13 +497,6 @@ gpio at 23 {
#gpio-cells = <2>;
};
- gpio at 24 {
- compatible = "nxp,pca9506";
- reg = <0x24>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
power-sensor at 40 {
compatible = "adi,adm1281", "mps,mp5990";
reg = <0x40>;
@@ -511,6 +515,13 @@ mctp at 10 {
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
};
+ gpio at 24 {
+ compatible = "nxp,pca9506";
+ reg = <0x24>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
gpio at 21 {
compatible = "nxp,pca9506";
reg = <0x21>;
@@ -532,13 +543,6 @@ gpio at 23 {
#gpio-cells = <2>;
};
- gpio at 24 {
- compatible = "nxp,pca9506";
- reg = <0x24>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
power-sensor at 40 {
compatible = "adi,adm1281", "mps,mp5990";
reg = <0x40>;
@@ -557,6 +561,13 @@ mctp at 10 {
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
};
+ gpio at 24 {
+ compatible = "nxp,pca9506";
+ reg = <0x24>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
gpio at 21 {
compatible = "nxp,pca9506";
reg = <0x21>;
@@ -578,13 +589,6 @@ gpio at 23 {
#gpio-cells = <2>;
};
- gpio at 24 {
- compatible = "nxp,pca9506";
- reg = <0x24>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
power-sensor at 40 {
compatible = "adi,adm1281", "mps,mp5990";
reg = <0x40>;
@@ -603,6 +607,13 @@ mctp at 10 {
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
};
+ gpio at 24 {
+ compatible = "nxp,pca9506";
+ reg = <0x24>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
gpio at 21 {
compatible = "nxp,pca9506";
reg = <0x21>;
@@ -624,13 +635,6 @@ gpio at 23 {
#gpio-cells = <2>;
};
- gpio at 24 {
- compatible = "nxp,pca9506";
- reg = <0x24>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
power-sensor at 40 {
compatible = "adi,adm1281", "mps,mp5990";
reg = <0x40>;
@@ -649,6 +653,13 @@ mctp at 10 {
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
};
+ gpio at 24 {
+ compatible = "nxp,pca9506";
+ reg = <0x24>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
gpio at 21 {
compatible = "nxp,pca9506";
reg = <0x21>;
@@ -670,13 +681,6 @@ gpio at 23 {
#gpio-cells = <2>;
};
- gpio at 24 {
- compatible = "nxp,pca9506";
- reg = <0x24>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
power-sensor at 40 {
compatible = "adi,adm1281", "mps,mp5990";
reg = <0x40>;
@@ -687,6 +691,7 @@ power-sensor at 40 {
&i2c8 {
status = "okay";
bus-frequency = <400000>;
+ i2c-clk-high-min-percent = <40>;
i2c-mux at 70 {
compatible = "nxp,pca9544";
i2c-mux-idle-disconnect;
@@ -798,6 +803,7 @@ eeprom at 54 {
&i2c9 {
status = "okay";
bus-frequency = <400000>;
+ i2c-clk-high-min-percent = <40>;
i2c-mux at 71 {
compatible = "nxp,pca9544";
i2c-mux-idle-disconnect;
@@ -993,7 +999,7 @@ power-sensor at 13 {
reg = <0x13>;
};
- gpio at 20 {
+ gpio_ext1: pca9555 at 20 {
compatible = "nxp,pca9555";
pinctrl-names = "default";
gpio-controller;
@@ -1012,7 +1018,7 @@ gpio at 20 {
"","";
};
- gpio at 21 {
+ gpio_ext2: pca9555 at 21 {
compatible = "nxp,pca9555";
pinctrl-names = "default";
gpio-controller;
@@ -1031,7 +1037,7 @@ gpio at 21 {
"","";
};
- gpio at 22 {
+ gpio_ext3: pca9555 at 22 {
compatible = "nxp,pca9555";
pinctrl-names = "default";
gpio-controller;
@@ -1050,7 +1056,7 @@ gpio at 22 {
"PWRGD_P12V_AUX_0","PWRGD_P12V_AUX_1";
};
- gpio at 23 {
+ gpio_ext4: pca9555 at 23 {
compatible = "nxp,pca9555";
pinctrl-names = "default";
gpio-controller;
@@ -1070,21 +1076,21 @@ gpio at 23 {
};
power-sensor at 40 {
- compatible = "mps,mp5023";
- reg = <0x40>;
+ compatible = "mps,mp5023";
+ reg = <0x40>;
};
power-sensor at 41 {
- compatible = "ti,ina233";
- resistor-calibration = /bits/ 16 <0x0a00>;
- current-lsb= /bits/ 16 <0x0001>;
- reg = <0x41>;
+ compatible = "ti,ina233";
+ resistor-calibration = /bits/ 16 <0x0a00>;
+ current-lsb= /bits/ 16 <0x0001>;
+ reg = <0x41>;
};
power-sensor at 44 {
- compatible = "ti,ina238";
- shunt-resistor = <1000>;
- reg = <0x44>;
+ compatible = "ti,ina238";
+ shunt-resistor = <1000>;
+ reg = <0x44>;
};
temperature-sensor at 48 {
@@ -1156,33 +1162,32 @@ rtc at 6f {
compatible = "nuvoton,nct3018y";
reg = <0x6f>;
};
-
gpio at 20 {
- compatible = "nxp,pca9506";
- reg = <0x20>;
- gpio-controller;
- #gpio-cells = <2>;
+ compatible = "nxp,pca9506";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
};
gpio at 21 {
- compatible = "nxp,pca9506";
- reg = <0x21>;
- gpio-controller;
- #gpio-cells = <2>;
+ compatible = "nxp,pca9506";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
};
gpio at 22 {
- compatible = "nxp,pca9506";
- reg = <0x22>;
- gpio-controller;
- #gpio-cells = <2>;
+ compatible = "nxp,pca9506";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
};
gpio at 23 {
- compatible = "nxp,pca9506";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
+ compatible = "nxp,pca9506";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
};
};
@@ -1242,35 +1247,35 @@ adc at 37 {
power-sensor at 40 {
compatible = "ti,ina233", "richtek,rtq6056";
reg = <0x40>;
- resistor-calibration = /bits/ 16 <0x0a00>;
+ resistor-calibration = /bits/ 16 <0x0400>;
current-lsb= /bits/ 16 <0x0001>;
};
power-sensor at 41 {
compatible = "ti,ina233", "richtek,rtq6056";
reg = <0x41>;
- resistor-calibration = /bits/ 16 <0x0a00>;
+ resistor-calibration = /bits/ 16 <0x0400>;
current-lsb= /bits/ 16 <0x0001>;
};
power-sensor at 42 {
compatible = "ti,ina233", "richtek,rtq6056";
reg = <0x42>;
- resistor-calibration = /bits/ 16 <0x0a00>;
+ resistor-calibration = /bits/ 16 <0x0400>;
current-lsb= /bits/ 16 <0x0001>;
};
power-sensor at 43 {
compatible = "ti,ina233", "richtek,rtq6056";
reg = <0x43>;
- resistor-calibration = /bits/ 16 <0x0a00>;
+ resistor-calibration = /bits/ 16 <0x0400>;
current-lsb= /bits/ 16 <0x0001>;
};
power-sensor at 44 {
compatible = "ti,ina233", "richtek,rtq6056";
reg = <0x44>;
- resistor-calibration = /bits/ 16 <0x0a00>;
+ resistor-calibration = /bits/ 16 <0x0400>;
current-lsb= /bits/ 16 <0x0001>;
};
@@ -1323,6 +1328,42 @@ channel at 5 {
};
};
+ hwmon0: hwmon at 21 {
+ compatible = "nuvoton,nct7363";
+ reg = <0x21>;
+ #pwm-cells = <2>;
+
+ fan-3 {
+ pwms = <&hwmon0 2 20000>;
+ tach-ch = /bits/ 8 <0x00>;
+ };
+
+ fan-4 {
+ pwms = <&hwmon0 5 20000>;
+ tach-ch = /bits/ 8 <0x01>;
+ };
+
+ fan-5 {
+ pwms = <&hwmon0 5 20000>;
+ tach-ch = /bits/ 8 <0x02>;
+ };
+
+ fan-0 {
+ pwms = <&hwmon0 0 20000>;
+ tach-ch = /bits/ 8 <0x09>;
+ };
+
+ fan-1 {
+ pwms = <&hwmon0 0 20000>;
+ tach-ch = /bits/ 8 <0x0c>;
+ };
+
+ fan-2 {
+ pwms = <&hwmon0 2 20000>;
+ tach-ch = /bits/ 8 <0x0e>;
+ };
+ };
+
gpio at 22{
compatible = "ti,tca6424";
reg = <0x22>;
@@ -1330,6 +1371,42 @@ gpio at 22{
#gpio-cells = <2>;
};
+ hwmon1: hwmon at 23 {
+ compatible = "nuvoton,nct7363";
+ reg = <0x23>;
+ #pwm-cells = <2>;
+
+ fan-3 {
+ pwms = <&hwmon0 2 20000>;
+ tach-ch = /bits/ 8 <0x00>;
+ };
+
+ fan-4 {
+ pwms = <&hwmon0 5 20000>;
+ tach-ch = /bits/ 8 <0x01>;
+ };
+
+ fan-5 {
+ pwms = <&hwmon0 5 20000>;
+ tach-ch = /bits/ 8 <0x02>;
+ };
+
+ fan-0 {
+ pwms = <&hwmon0 0 20000>;
+ tach-ch = /bits/ 8 <0x09>;
+ };
+
+ fan-1 {
+ pwms = <&hwmon0 0 20000>;
+ tach-ch = /bits/ 8 <0x0c>;
+ };
+
+ fan-2 {
+ pwms = <&hwmon0 2 20000>;
+ tach-ch = /bits/ 8 <0x0e>;
+ };
+ };
+
pwm at 2f{
compatible = "maxim,max31790";
#address-cells = <1>;
@@ -1393,6 +1470,42 @@ channel at 5 {
};
};
+ hwmon2: hwmon at 21 {
+ compatible = "nuvoton,nct7363";
+ reg = <0x21>;
+ #pwm-cells = <2>;
+
+ fan-3 {
+ pwms = <&hwmon2 2 20000>;
+ tach-ch = /bits/ 8 <0x00>;
+ };
+
+ fan-4 {
+ pwms = <&hwmon2 5 20000>;
+ tach-ch = /bits/ 8 <0x01>;
+ };
+
+ fan-5 {
+ pwms = <&hwmon2 5 20000>;
+ tach-ch = /bits/ 8 <0x02>;
+ };
+
+ fan-0 {
+ pwms = <&hwmon2 0 20000>;
+ tach-ch = /bits/ 8 <0x09>;
+ };
+
+ fan-1 {
+ pwms = <&hwmon2 0 20000>;
+ tach-ch = /bits/ 8 <0x0c>;
+ };
+
+ fan-2 {
+ pwms = <&hwmon2 2 20000>;
+ tach-ch = /bits/ 8 <0x0e>;
+ };
+ };
+
gpio at 22{
compatible = "ti,tca6424";
reg = <0x22>;
@@ -1400,6 +1513,42 @@ gpio at 22{
#gpio-cells = <2>;
};
+ hwmon3: hwmon at 23 {
+ compatible = "nuvoton,nct7363";
+ reg = <0x23>;
+ #pwm-cells = <2>;
+
+ fan-3 {
+ pwms = <&hwmon3 2 20000>;
+ tach-ch = /bits/ 8 <0x00>;
+ };
+
+ fan-4 {
+ pwms = <&hwmon3 5 20000>;
+ tach-ch = /bits/ 8 <0x01>;
+ };
+
+ fan-5 {
+ pwms = <&hwmon3 5 20000>;
+ tach-ch = /bits/ 8 <0x02>;
+ };
+
+ fan-0 {
+ pwms = <&hwmon3 0 20000>;
+ tach-ch = /bits/ 8 <0x09>;
+ };
+
+ fan-1 {
+ pwms = <&hwmon3 0 20000>;
+ tach-ch = /bits/ 8 <0x0c>;
+ };
+
+ fan-2 {
+ pwms = <&hwmon3 2 20000>;
+ tach-ch = /bits/ 8 <0x0e>;
+ };
+ };
+
pwm at 2f{
compatible = "maxim,max31790";
#address-cells = <1>;
@@ -1493,7 +1642,7 @@ temperature-sensor at 1f {
reg = <0x1f>;
};
- temperature-sensor at 3c {
+ emc1403 at 3c {
compatible = "smsc,emc1403";
reg = <0x3c>;
};
@@ -1514,7 +1663,7 @@ temperature-sensor at 1f {
reg = <0x1f>;
};
- temperature-sensor at 3c {
+ emc1403 at 3c {
compatible = "smsc,emc1403";
reg = <0x3c>;
};
@@ -1535,7 +1684,7 @@ temperature-sensor at 1f {
reg = <0x1f>;
};
- temperature-sensor at 3c {
+ emc1403 at 3c {
compatible = "smsc,emc1403";
reg = <0x3c>;
};
@@ -1556,7 +1705,7 @@ temperature-sensor at 1f {
reg = <0x1f>;
};
- temperature-sensor at 3c {
+ emc1403 at 3c {
compatible = "smsc,emc1403";
reg = <0x3c>;
};
@@ -1569,6 +1718,92 @@ eeprom at 50 {
};
};
+&i3c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i3c1_default>;
+ i3c-pp-scl-hi-period-ns = <40>;
+ i3c-pp-scl-lo-period-ns = <40>;
+ i3c-od-scl-hi-period-ns = <380>;
+ i3c-od-scl-lo-period-ns = <620>;
+ sda-tx-hold-ns = <10>;
+
+ mctp-controller;
+ hub at 0x70 {
+ reg = <0x70 0x3c0 0x00700000>;
+ cp0-ldo-en = "enabled";
+ cp1-ldo-en = "enabled";
+ cp0-ldo-volt = "1.2V";
+ cp1-ldo-volt = "1.2V";
+ tp0145-ldo-en = "enabled";
+ tp2367-ldo-en = "enabled";
+ tp0145-ldo-volt = "1.2V";
+ tp2367-ldo-volt = "1.2V";
+ tp0145-pullup = "2k";
+ tp2367-pullup = "2k";
+
+ target-port at 0 {
+ mode = "i3c";
+ pullup = "enabled";
+ };
+ target-port at 1 {
+ mode = "i3c";
+ pullup = "enabled";
+ };
+ target-port at 2 {
+ mode = "i3c";
+ pullup = "enabled";
+ };
+ target-port at 3 {
+ mode = "i3c";
+ pullup = "enabled";
+ };
+ };
+};
+
+&i3c1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i3c2_default>;
+ i3c-pp-scl-hi-period-ns = <40>;
+ i3c-pp-scl-lo-period-ns = <40>;
+ i3c-od-scl-hi-period-ns = <380>;
+ i3c-od-scl-lo-period-ns = <620>;
+ sda-tx-hold-ns = <10>;
+
+ mctp-controller;
+ hub at 0x70 {
+ reg = <0x70 0x3c0 0x00700000>;
+ cp0-ldo-en = "enabled";
+ cp1-ldo-en = "enabled";
+ cp0-ldo-volt = "1.2V";
+ cp1-ldo-volt = "1.2V";
+ tp0145-ldo-en = "enabled";
+ tp2367-ldo-en = "enabled";
+ tp0145-ldo-volt = "1.2V";
+ tp2367-ldo-volt = "1.2V";
+ tp0145-pullup = "2k";
+ tp2367-pullup = "2k";
+
+ target-port at 0 {
+ mode = "i3c";
+ pullup = "enabled";
+ };
+ target-port at 1 {
+ mode = "i3c";
+ pullup = "enabled";
+ };
+ target-port at 2 {
+ mode = "i3c";
+ pullup = "enabled";
+ };
+ target-port at 3 {
+ mode = "i3c";
+ pullup = "enabled";
+ };
+ };
+};
+
&adc0 {
status = "okay";
pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
@@ -1579,8 +1814,8 @@ &pinctrl_adc4_default &pinctrl_adc5_default
&adc1 {
status = "okay";
- pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default>
- &pinctrl_adc15_default>;
+ pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+ &pinctrl_adc15_default>;
};
&ehci0 {
@@ -1595,6 +1830,10 @@ &uhci {
status = "okay";
};
+&jtag1 {
+ status = "okay";
+};
+
&sgpiom0 {
status = "okay";
ngpios = <128>;
@@ -1701,16 +1940,29 @@ &pinctrl_gpio3_unbiased &pinctrl_gpio4_unbiased
"","PRSNT_NIC0_N","","",
/*V0-V7*/ "FM_RESBTN_SLOT5_BMC_N","FM_RESBTN_SLOT6_BMC_N",
"FM_RESBTN_SLOT7_BMC_N","FM_RESBTN_SLOT8_BMC_N",
- "","","","",
+ "ALT_SPIDER_INA233_R_N","ALT_SPIDER_TMP75_R_N",
+ "INT_FANBOARD1_IOEXP_N","INT_FANBOARD0_IOEXP_N",
/*W0-W7*/ "PRSNT_TPM_BMC_N","PRSNT_OCP_DEBUG_BMC_N","ALT_TEMP_BMC_N","ALT_RTC_BMC_N",
"","","","",
- /*X0-X7*/ "","LT_HSC_SERVER_SLOT6_N","FLT_HSC_SERVER_SLOT7_N","","","",
+ /*X0-X7*/ "","FLT_HSC_SERVER_SLOT6_N","FLT_HSC_SERVER_SLOT7_N","","","",
"PWRGD_SLOT5_STBY","PWRGD_SLOT6_STBY",
/*Y0-Y7*/ "","","SPI_LOCK_REQ_BMC_N","PWRGD_SLOT7_STBY",
"","","EN_NIC2_POWER_BMC_R","",
/*Z0-Z7*/ "EN_P5V_USB_CPLD_R","FLT_HSC_SERVER_SLOT5_N",
"PWRGD_SLOT8_STBY","","","","","";
+ pin_gpio_b0 {
+ gpios = <ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_b2 {
+ gpios = <ASPEED_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
+ input;
+ };
+ pin_gpio_b3 {
+ gpios = <ASPEED_GPIO(B, 3) GPIO_ACTIVE_HIGH>;
+ input;
+ };
pin_gpio_b4 {
gpios = <ASPEED_GPIO(B, 4) GPIO_ACTIVE_HIGH>;
input;
@@ -1719,6 +1971,14 @@ pin_gpio_b5 {
gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
input;
};
+ pin_gpio_e0 {
+ gpios = <ASPEED_GPIO(E, 0) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_e1 {
+ gpios = <ASPEED_GPIO(E, 1) GPIO_ACTIVE_LOW>;
+ input;
+ };
pin_gpio_f0 {
gpios = <ASPEED_GPIO(F, 0) GPIO_ACTIVE_LOW>;
input;
@@ -1759,6 +2019,58 @@ pin_gpio_l7 {
gpios = <ASPEED_GPIO(L, 7) GPIO_ACTIVE_LOW>;
input;
};
+ pin_gpio_m3 {
+ gpios = <ASPEED_GPIO(M, 3) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_m4 {
+ gpios = <ASPEED_GPIO(M, 4) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_m5 {
+ gpios = <ASPEED_GPIO(M, 5) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_n0 {
+ gpios = <ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_n1 {
+ gpios = <ASPEED_GPIO(N, 1) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_n2 {
+ gpios = <ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_n3 {
+ gpios = <ASPEED_GPIO(N, 3) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_p1 {
+ gpios = <ASPEED_GPIO(P, 1) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_q4 {
+ gpios = <ASPEED_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_q5 {
+ gpios = <ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_q6 {
+ gpios = <ASPEED_GPIO(Q, 6) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_q7 {
+ gpios = <ASPEED_GPIO(Q, 7) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_r1 {
+ gpios = <ASPEED_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+ input;
+ };
pin_gpio_s0 {
gpios = <ASPEED_GPIO(S, 0) GPIO_ACTIVE_LOW>;
input;
@@ -1767,6 +2079,14 @@ pin_gpio_s1 {
gpios = <ASPEED_GPIO(S, 1) GPIO_ACTIVE_LOW>;
input;
};
+ pin_gpio_s5 {
+ gpios = <ASPEED_GPIO(S, 5) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_u5 {
+ gpios = <ASPEED_GPIO(U, 5) GPIO_ACTIVE_LOW>;
+ input;
+ };
pin_gpio_v0 {
gpios = <ASPEED_GPIO(V, 0) GPIO_ACTIVE_LOW>;
input;
@@ -1783,6 +2103,14 @@ pin_gpio_v3 {
gpios = <ASPEED_GPIO(V, 3) GPIO_ACTIVE_LOW>;
input;
};
+ pin_gpio_v6 {
+ gpios = <ASPEED_GPIO(V, 6) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_v7 {
+ gpios = <ASPEED_GPIO(V, 7) GPIO_ACTIVE_LOW>;
+ input;
+ };
pin_gpio_w0 {
gpios = <ASPEED_GPIO(W, 0) GPIO_ACTIVE_LOW>;
input;
@@ -1815,6 +2143,34 @@ pin_gpio_w7 {
gpios = <ASPEED_GPIO(W, 7) GPIO_ACTIVE_LOW>;
input;
};
+ pin_gpio_x1 {
+ gpios = <ASPEED_GPIO(X, 1) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_x2 {
+ gpios = <ASPEED_GPIO(X, 2) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_x6 {
+ gpios = <ASPEED_GPIO(X, 6) GPIO_ACTIVE_HIGH>;
+ input;
+ };
+ pin_gpio_x7 {
+ gpios = <ASPEED_GPIO(X, 7) GPIO_ACTIVE_HIGH>;
+ input;
+ };
+ pin_gpio_y3 {
+ gpios = <ASPEED_GPIO(Y, 3) GPIO_ACTIVE_HIGH>;
+ input;
+ };
+ pin_gpio_z1 {
+ gpios = <ASPEED_GPIO(Z, 1) GPIO_ACTIVE_LOW>;
+ input;
+ };
+ pin_gpio_z2 {
+ gpios = <ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
+ input;
+ };
pin_gpio_z3 {
gpios = <ASPEED_GPIO(Z, 3) GPIO_ACTIVE_LOW>;
input;
--
2.25.1
More information about the Linux-aspeed
mailing list