[PATCH v1 1/2] hwmon: (aspeed-g6-pwm-tacho): Extend the #pwm-cells to 4

[Rob Herring]

On Thu, Oct 24, 2024 at 03:15:47PM +0800, Billy Tsai wrote:
> Add an option to support #pwm-cells up to 4. The additional cell is used
> to enable the WDT reset feature, which is specific to the ASPEED PWM
> controller.

Use subject prefixes matching the subsystem.

> 
> Signed-off-by: Billy Tsai <billy_tsai at aspeedtech.com>
> Change-Id: Iefcc9622ac3dc684441d3e77aeb53c00f2ce4097

Drop.

> ---
>  .../bindings/hwmon/aspeed,g6-pwm-tach.yaml    | 25 ++++++++++++++++++-
>  1 file changed, 24 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml b/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml
> index 9e5ed901ae54..0cc92ce29ece 100644
> --- a/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml
> @@ -31,7 +31,11 @@ properties:
>      maxItems: 1
>  
>    "#pwm-cells":
> -    const: 3
> +    enum: [3, 4]
> +    description: |
> +      The value should be 4 to enable the WDT reload feature, which will change the duty cycle to
> +      a preprogrammed value after WDT/EXTRST#.
> +      The range for the fourth cell value supported by this binding is 0 to 255.

Wrap lines at 80.

>  
>  patternProperties:
>    "^fan-[0-9]+$":
> @@ -69,3 +73,22 @@ examples:
>          pwms = <&pwm_tach 1 40000 0>;
>        };
>      };
> +  - |
> +    #include <dt-bindings/clock/aspeed-clock.h>
> +    pwm_tach: pwm-tach-controller at 1e610000 {
> +      compatible = "aspeed,ast2600-pwm-tach";
> +      reg = <0x1e610000 0x100>;
> +      clocks = <&syscon ASPEED_CLK_AHB>;
> +      resets = <&syscon ASPEED_RESET_PWM>;
> +      #pwm-cells = <4>;
> +
> +      fan-0 {
> +        tach-ch = /bits/ 8 <0x0>;
> +        pwms = <&pwm_tach 0 40000 0 128>;
> +      };
> +
> +      fan-1 {
> +        tach-ch = /bits/ 8 <0x1 0x2>;
> +        pwms = <&pwm_tach 1 40000 0 160>;
> +      };
> +    };
> -- 
> 2.25.1
>