[PATCH] pinctrl: aspeed-g6: Support drive-strength for GPIOF/G

[Billy Tsai]

Add drive strength configuration support for GPIO F and G groups.

Signed-off-by: Billy Tsai <billy_tsai at aspeedtech.com>
---
 drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
index 6ecc656abc44..5a7cd0a88687 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
@@ -2607,6 +2607,10 @@ static struct aspeed_pin_config aspeed_g6_configs[] = {
 	{ PIN_CONFIG_DRIVE_STRENGTH, { AB8, AB8 }, SCU454, GENMASK(27, 26)},
 	/* LAD0 */
 	{ PIN_CONFIG_DRIVE_STRENGTH, { AB7, AB7 }, SCU454, GENMASK(25, 24)},
+	/* GPIOF */
+	{ PIN_CONFIG_DRIVE_STRENGTH, { D22, A23 }, SCU458, GENMASK(9, 8)},
+	/* GPIOG */
+	{ PIN_CONFIG_DRIVE_STRENGTH, { E21, B21 }, SCU458, GENMASK(11, 10)},
 
 	/* MAC3 */
 	{ PIN_CONFIG_POWER_SOURCE,   { H24, E26 }, SCU458, BIT_MASK(4)},
-- 
2.25.1