RE: 回覆: [PATCH v1 08/10] arm64: dts: aspeed: Add initial AST27XX device tree

[Kevin Chen]

> >>> diff --git a/arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi
> >>> b/arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi
> >>> new file mode 100644
> >>> index 000000000000..858ab95251e4
> >>> --- /dev/null
> >>> +++ b/arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi
> >>> @@ -0,0 +1,217 @@
> >>> +// SPDX-License-Identifier: GPL-2.0-or-later #include
> >>> +<dt-bindings/clock/aspeed,ast2700-clk.h>
> >>> +#include <dt-bindings/reset/aspeed,ast2700-reset.h>
> >>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> >>> +#include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
> >>> +
> >>> +/ {
> >>> +     model = "Aspeed BMC";
> >>
> >> Model of what? No, drop.
> > Can I change to "model = "AST2700 EVB""
> 
> Model of what? No, it does not make sense here.
Should I change to model = "Aspeed BMC SoC";

> 
> 
> ..
> 
> 
> >>> +
> >>> +             uart12: serial at 14c33b00 {
> >>> +                     compatible = "ns16550a";
> >>> +                     reg = <0x0 0x14c33b00 0x0 0x100>;
> >>> +                     reg-shift = <2>;
> >>> +                     reg-io-width = <4>;
> >>> +                     clocks = <&syscon1
> SCU1_CLK_GATE_UART12CLK>;
> >>> +                     no-loopback-test;
> >>> +                     pinctrl-names = "default";
> >>
> >> What is this?
> > BMC uart using in uart12 in soc1.
> 
> No, that line. pinctrl-names do not make sense here without values.
Agree, I will remove the line of pinctrl-names in next patch.
Pinctrl property needed to be defined in the future patches.

> 
> >
> >>
> >>> +             };
> >>> +     };
> >>> +};
> >>> +
> >
> > --
> > Best Regards,
> > Kevin. Chen
> >
> 
> Why do you quote my email twice?
> 
> 
> ...
> 
> >> +             uart12: serial at 14c33b00 {
> >> +                     compatible = "ns16550a";
> >> +                     reg = <0x0 0x14c33b00 0x0 0x100>;
> >> +                     reg-shift = <2>;
> >> +                     reg-io-width = <4>;
> >> +                     clocks = <&syscon1
> SCU1_CLK_GATE_UART12CLK>;
> >> +                     no-loopback-test;
> >> +                     pinctrl-names = "default";
> >
> > What is this?
> >
> >> +             };
> >> +     };
> >> +};
> >> +
> >
> > Best regards,
> > Krzysztof
> >
> other confidential information. If you have received it in error, please notify the
> sender by reply e-mail and immediately delete the e-mail and any
> attachments without copying or disclosing the contents. Thank you.
> 
> Maybe I am the intended recipient of your message, maybe not. I don't want to
> have any legal questions regarding upstream, public collaboration, thus
> probably I should just remove your messages.
> 
> Please talk with your IT that such disclaimers in open-source are not desired
> (and maybe even harmful).
> If you do not understand why, please also see:
> https://www.youtube.com/live/fMeH7wqOwXA?si=GY7igfbda6vnjXlJ&t=835
> 
> If you need to go around company SMTP server, then consider using b4
> web-relay: https://b4.docs.kernel.org/en/latest/contributor/send.html
> 
> Please be informed that by responding to this email you agree that all
> communications from you and/or your company is made public. In other words,
> all messages originating from you and/or your company will be made public.
> 
> Best regards,
> Krzysztof