[PATCH v1 3/3] ARM: dts: aspeed: system1: Add GPIO line names

[Ninad Palsule]

Add following GPIO line names so that userspace can control them
- PCH related GPIOs
- FPGA related GPIOs

Signed-off-by: Ninad Palsule <ninad at linux.ibm.com>
---
 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
index c0219167a337a..35cb9fea308e8 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
@@ -370,17 +370,17 @@ &gpio0 {
 	/*K0-K7*/	"","","","","","","","",
 	/*L0-L7*/	"","","","","","","","bmc-ready",
 	/*M0-M7*/	"","","","","","","","",
-	/*N0-N7*/	"","","","","","","","",
+	/*N0-N7*/	"fpga-debug-enable","","","","","","","",
 	/*O0-O7*/	"","","","","","","","",
 	/*P0-P7*/	"","","","","","","","bmc-hb",
-	/*Q0-Q7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","pch-ready","",
 	/*R0-R7*/	"","","","","","","","",
 	/*S0-S7*/	"","","","","","","rear-enc-fault0","rear-enc-id0",
 	/*T0-T7*/	"","","","","","","","",
 	/*U0-U7*/	"","","","","","","","",
 	/*V0-V7*/	"","rtc-battery-voltage-read-enable","","power-chassis-control","","","","",
 	/*W0-W7*/	"","","","","","","","",
-	/*X0-X7*/	"","power-chassis-good","","","","","","",
+	/*X0-X7*/	"fpga-pgood","power-chassis-good","pch-pgood","","","","","",
 	/*Y0-Y7*/	"","","","","","","","",
 	/*Z0-Z7*/	"","","","","","","","";
 };
-- 
2.43.0