[PATCH v4 2/3] watchdog: aspeed: Change aspeed_wdt_config struct name to aspeed_wdt_data
Chin-Ting Kuo
chin-ting_kuo at aspeedtech.com
Fri Nov 1 23:12:00 AEDT 2024
aspeed_wdt_config struct is used to store some HW configuration
information. Changing its naming to a more generic one,
aspeed_wdt_data, in order to contain more platform specific
inforamtion or SW callback functions.
Signed-off-by: Chin-Ting Kuo <chin-ting_kuo at aspeedtech.com>
---
drivers/watchdog/aspeed_wdt.c | 32 ++++++++++++++++----------------
1 file changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/watchdog/aspeed_wdt.c b/drivers/watchdog/aspeed_wdt.c
index 4ad6335ff25b..63b5ff9e2751 100644
--- a/drivers/watchdog/aspeed_wdt.c
+++ b/drivers/watchdog/aspeed_wdt.c
@@ -31,7 +31,7 @@ struct aspeed_wdt_scu {
u32 wdt_reset_mask_shift;
};
-struct aspeed_wdt_config {
+struct aspeed_wdt_data {
u32 ext_pulse_width_mask;
u32 irq_shift;
u32 irq_mask;
@@ -42,10 +42,10 @@ struct aspeed_wdt {
struct watchdog_device wdd;
void __iomem *base;
u32 ctrl;
- const struct aspeed_wdt_config *cfg;
+ const struct aspeed_wdt_data *data;
};
-static const struct aspeed_wdt_config ast2400_config = {
+static const struct aspeed_wdt_data ast2400_data = {
.ext_pulse_width_mask = 0xff,
.irq_shift = 0,
.irq_mask = 0,
@@ -58,7 +58,7 @@ static const struct aspeed_wdt_config ast2400_config = {
},
};
-static const struct aspeed_wdt_config ast2500_config = {
+static const struct aspeed_wdt_data ast2500_data = {
.ext_pulse_width_mask = 0xfffff,
.irq_shift = 12,
.irq_mask = GENMASK(31, 12),
@@ -71,7 +71,7 @@ static const struct aspeed_wdt_config ast2500_config = {
},
};
-static const struct aspeed_wdt_config ast2600_config = {
+static const struct aspeed_wdt_data ast2600_data = {
.ext_pulse_width_mask = 0xfffff,
.irq_shift = 0,
.irq_mask = GENMASK(31, 10),
@@ -85,9 +85,9 @@ static const struct aspeed_wdt_config ast2600_config = {
};
static const struct of_device_id aspeed_wdt_of_table[] = {
- { .compatible = "aspeed,ast2400-wdt", .data = &ast2400_config },
- { .compatible = "aspeed,ast2500-wdt", .data = &ast2500_config },
- { .compatible = "aspeed,ast2600-wdt", .data = &ast2600_config },
+ { .compatible = "aspeed,ast2400-wdt", .data = &ast2400_data },
+ { .compatible = "aspeed,ast2500-wdt", .data = &ast2500_data },
+ { .compatible = "aspeed,ast2600-wdt", .data = &ast2600_data },
{ },
};
MODULE_DEVICE_TABLE(of, aspeed_wdt_of_table);
@@ -216,8 +216,8 @@ static int aspeed_wdt_set_pretimeout(struct watchdog_device *wdd,
{
struct aspeed_wdt *wdt = to_aspeed_wdt(wdd);
u32 actual = pretimeout * WDT_RATE_1MHZ;
- u32 s = wdt->cfg->irq_shift;
- u32 m = wdt->cfg->irq_mask;
+ u32 s = wdt->data->irq_shift;
+ u32 m = wdt->data->irq_mask;
wdd->pretimeout = pretimeout;
wdt->ctrl &= ~m;
@@ -248,7 +248,7 @@ static int aspeed_wdt_update_bootstatus(struct platform_device *pdev,
struct aspeed_wdt *wdt)
{
struct resource *res;
- struct aspeed_wdt_scu scu = wdt->cfg->scu;
+ struct aspeed_wdt_scu scu = wdt->data->scu;
struct regmap *scu_base;
u32 reset_mask_width;
u32 reset_mask_shift;
@@ -401,7 +401,7 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
ofdid = of_match_node(aspeed_wdt_of_table, np);
if (!ofdid)
return -EINVAL;
- wdt->cfg = ofdid->data;
+ wdt->data = ofdid->data;
wdt->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(wdt->base))
@@ -409,7 +409,7 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
wdt->wdd.info = &aspeed_wdt_info;
- if (wdt->cfg->irq_mask) {
+ if (wdt->data->irq_mask) {
int irq = platform_get_irq_optional(pdev, 0);
if (irq > 0) {
@@ -485,7 +485,7 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
size_t nrstmask = of_device_is_compatible(np, "aspeed,ast2600-wdt") ? 2 : 1;
u32 reg = readl(wdt->base + WDT_RESET_WIDTH);
- reg &= wdt->cfg->ext_pulse_width_mask;
+ reg &= wdt->data->ext_pulse_width_mask;
if (of_property_read_bool(np, "aspeed,ext-active-high"))
reg |= WDT_ACTIVE_HIGH_MAGIC;
else
@@ -493,7 +493,7 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
writel(reg, wdt->base + WDT_RESET_WIDTH);
- reg &= wdt->cfg->ext_pulse_width_mask;
+ reg &= wdt->data->ext_pulse_width_mask;
if (of_property_read_bool(np, "aspeed,ext-push-pull"))
reg |= WDT_PUSH_PULL_MAGIC;
else
@@ -510,7 +510,7 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
}
if (!of_property_read_u32(np, "aspeed,ext-pulse-duration", &duration)) {
- u32 max_duration = wdt->cfg->ext_pulse_width_mask + 1;
+ u32 max_duration = wdt->data->ext_pulse_width_mask + 1;
if (duration == 0 || duration > max_duration) {
dev_err(dev, "Invalid pulse duration: %uus\n",
--
2.34.1
More information about the Linux-aspeed
mailing list