[PATCH 2/3] arm64: dts: imx93: drop "master" I3C node name suffix

[Krzysztof Kozlowski]

Following change in the I3C bindings, the "master" suffix in I3C
controller node name is discouraged (it is "controller" now) and not
accurate (if device supports also target mode).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>

---

The change can be applied through independent trees, if the I3C bindings
change is applied.  Therefore please take it once I3C bindings is
applied.
---
 arch/arm64/boot/dts/freescale/imx93.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index 8f2e7c42ad6e..601c94e1fac8 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -294,7 +294,7 @@ tpm2: pwm at 44320000 {
 				status = "disabled";
 			};
 
-			i3c1: i3c-master at 44330000 {
+			i3c1: i3c at 44330000 {
 				compatible = "silvaco,i3c-master-v1";
 				reg = <0x44330000 0x10000>;
 				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
@@ -671,7 +671,7 @@ tpm6: pwm at 42510000 {
 				status = "disabled";
 			};
 
-			i3c2: i3c-master at 42520000 {
+			i3c2: i3c at 42520000 {
 				compatible = "silvaco,i3c-master-v1";
 				reg = <0x42520000 0x10000>;
 				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.34.1