[PATCH v4 3/3] ARM: dts: aspeed: System1: IBM system1 BMC board
Ninad Palsule
ninad at linux.ibm.com
Wed Jan 17 05:37:34 AEDT 2024
From: Andrew Geissler <geissonator at yahoo.com>
Add a device tree for IBM system1 BMC board. It uses AST2600 SOC.
- Added base board
- Added i2c devices and muxes.
- Added different voltage regulators.
- Added GPIO pin assignements, GPIO expansion devices
- Added LED brinker devices
- Added Fan controllers
- Added EEPROM/VPD
- Added Power supplies
- Added Humidity, pressure and temperature sensors.
- Added Trusted platform module(TPM) chip.
Tested:
This board is tested using the simics simulator.
Signed-off-by: Ninad Palsule <ninad at linux.ibm.com>
Signed-off-by: Andrew Geissler <geissonator at yahoo.com>
---
The compatibility string and schema for tpm device is documented in the
following patch series:
-https://lore.kernel.org/all/77fe0ccd-53ff-4773-9787-0d038434297f@linux.ibm.com/
-https://lore.kernel.org/all/3f56f0a2bb90697a23e83583a21684b75dc7eea2.1701093036.git.lukas@wunner.de/
v4:
- Removed the compatibility string "nuvoton,npct75x" from tpm node as
per the Conor's review comment.
v3:
- Fixed the voltage-regulator names.
v2:
- Incorporated review comments from Conor Dooley, Jarkko Sakkinen,
Guenter Roeck, Rob Herring, Krzysztof Kozlowski
- Merge all patches into single patch.
- Split the trivial device patch.
- Cleanup commit messages.
- Fixed bootargs string.
- Fixed node names.
- Dropped tpm schema patch as it is covered by Lukas's patch.
- Dropped "tpm: tis-i2c: Add more compatible strings" patch and
send it as a separate patch.
---
arch/arm/boot/dts/aspeed/Makefile | 1 +
.../dts/aspeed/aspeed-bmc-ibm-system1.dts | 1623 +++++++++++++++++
2 files changed, 1624 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index 23cbc7203a8e..d551aed79286 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -32,6 +32,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-ibm-rainier.dtb \
aspeed-bmc-ibm-rainier-1s4u.dtb \
aspeed-bmc-ibm-rainier-4u.dtb \
+ aspeed-bmc-ibm-system1.dtb \
aspeed-bmc-intel-s2600wf.dtb \
aspeed-bmc-inspur-fp5280g2.dtb \
aspeed-bmc-inspur-nf5280m6.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
new file mode 100644
index 000000000000..dcbc16308ab5
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
@@ -0,0 +1,1623 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2023 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+ model = "System1";
+ compatible = "ibm,system1-bmc", "aspeed,ast2600";
+
+ aliases {
+ i2c16 = &i2c8mux1chn0;
+ i2c17 = &i2c8mux1chn1;
+ i2c18 = &i2c8mux1chn2;
+ i2c19 = &i2c8mux1chn3;
+ i2c20 = &i2c8mux1chn4;
+ i2c21 = &i2c8mux1chn5;
+ i2c22 = &i2c8mux1chn6;
+ i2c23 = &i2c8mux1chn7;
+ i2c24 = &i2c3mux0chn0;
+ i2c25 = &i2c3mux0chn1;
+ i2c26 = &i2c3mux0chn2;
+ i2c27 = &i2c3mux0chn3;
+ i2c28 = &i2c3mux0chn4;
+ i2c29 = &i2c3mux0chn5;
+ i2c30 = &i2c3mux0chn6;
+ i2c31 = &i2c3mux0chn7;
+ i2c32 = &i2c6mux0chn0;
+ i2c33 = &i2c6mux0chn1;
+ i2c34 = &i2c6mux0chn2;
+ i2c35 = &i2c6mux0chn3;
+ i2c36 = &i2c6mux0chn4;
+ i2c37 = &i2c6mux0chn5;
+ i2c38 = &i2c6mux0chn6;
+ i2c39 = &i2c6mux0chn7;
+ i2c40 = &i2c7mux0chn0;
+ i2c41 = &i2c7mux0chn1;
+ i2c42 = &i2c7mux0chn2;
+ i2c43 = &i2c7mux0chn3;
+ i2c44 = &i2c7mux0chn4;
+ i2c45 = &i2c7mux0chn5;
+ i2c46 = &i2c7mux0chn6;
+ i2c47 = &i2c7mux0chn7;
+ i2c48 = &i2c8mux0chn0;
+ i2c49 = &i2c8mux0chn1;
+ i2c50 = &i2c8mux0chn2;
+ i2c51 = &i2c8mux0chn3;
+ i2c52 = &i2c8mux0chn4;
+ i2c53 = &i2c8mux0chn5;
+ i2c54 = &i2c8mux0chn6;
+ i2c55 = &i2c8mux0chn7;
+ i2c56 = &i2c14mux0chn0;
+ i2c57 = &i2c14mux0chn1;
+ i2c58 = &i2c14mux0chn2;
+ i2c59 = &i2c14mux0chn3;
+ i2c60 = &i2c14mux0chn4;
+ i2c61 = &i2c14mux0chn5;
+ i2c62 = &i2c14mux0chn6;
+ i2c63 = &i2c14mux0chn7;
+ i2c64 = &i2c15mux0chn0;
+ i2c65 = &i2c15mux0chn1;
+ i2c66 = &i2c15mux0chn2;
+ i2c67 = &i2c15mux0chn3;
+ i2c68 = &i2c15mux0chn4;
+ i2c69 = &i2c15mux0chn5;
+ i2c70 = &i2c15mux0chn6;
+ i2c71 = &i2c15mux0chn7;
+ };
+
+ chosen {
+ stdout-path = "uart5:115200n8";
+ };
+
+ memory at 80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ eventlog: tcg-event-log at b3d00000 {
+ no-map;
+ reg = <0xb3d00000 0x100000>;
+ };
+
+ ramoops at b3e00000 {
+ compatible = "ramoops";
+ reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+ record-size = <0x8000>;
+ console-size = <0x8000>;
+ ftrace-size = <0x8000>;
+ pmsg-size = <0x8000>;
+ max-reason = <3>; /* KMSG_DUMP_EMERG */
+ };
+
+ /* LPC FW cycle bridge region requires natural alignment */
+ flash_memory: region at b4000000 {
+ no-map;
+ reg = <0xb4000000 0x04000000>; /* 64M */
+ };
+
+ /* VGA region is dictated by hardware strapping */
+ vga_memory: region at bf000000 {
+ no-map;
+ compatible = "shared-dma-pool";
+ reg = <0xbf000000 0x01000000>; /* 16M */
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ gpios = <&gpio0 ASPEED_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
+ };
+
+ led-1 {
+ gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_HIGH>;
+ };
+
+ led-2 {
+ gpios = <&gpio0 ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
+ };
+
+ led-3 {
+ gpios = <&gpio0 ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+ };
+
+ led-4 {
+ gpios = <&pca3 5 GPIO_ACTIVE_LOW>;
+ };
+
+ led-5 {
+ gpios = <&pca3 6 GPIO_ACTIVE_LOW>;
+ };
+
+ led-6 {
+ gpios = <&pca3 7 GPIO_ACTIVE_LOW>;
+ };
+
+ led-7 {
+ gpios = <&pca3 8 GPIO_ACTIVE_LOW>;
+ };
+
+ led-8 {
+ gpios = <&pca3 9 GPIO_ACTIVE_LOW>;
+ };
+
+ led-9 {
+ gpios = <&pca3 10 GPIO_ACTIVE_LOW>;
+ };
+
+ led-a {
+ gpios = <&pca3 11 GPIO_ACTIVE_LOW>;
+ };
+
+ led-b {
+ gpios = <&pca4 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-c {
+ gpios = <&pca4 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-d {
+ gpios = <&pca4 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-e {
+ gpios = <&pca4 7 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ poll-interval = <1000>;
+
+ event-nvme0-presence {
+ label = "nvme0-presence";
+ gpios = <&pca4 0 GPIO_ACTIVE_LOW>;
+ linux,code = <0>;
+ };
+
+ event-nvme1-presence {
+ label = "nvme1-presence";
+ gpios = <&pca4 1 GPIO_ACTIVE_LOW>;
+ linux,code = <1>;
+ };
+
+ event-nvme2-presence {
+ label = "nvme2-presence";
+ gpios = <&pca4 2 GPIO_ACTIVE_LOW>;
+ linux,code = <2>;
+ };
+
+ event-nvme3-presence {
+ label = "nvme3-presence";
+ gpios = <&pca4 3 GPIO_ACTIVE_LOW>;
+ linux,code = <3>;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&p12v_vd 0>, <&p5v_aux_vd 0>,
+ <&p5v_bmc_aux_vd 0>, <&p3v3_aux_vd 0>,
+ <&p3v3_bmc_aux_vd 0>, <&p1v8_bmc_aux_vd 0>,
+ <&adc1 4>, <&adc0 2>, <&adc1 0>,
+ <&p2v5_aux_vd 0>, <&adc1 7>;
+ };
+
+ p12v_vd: voltage-divider1 {
+ compatible = "voltage-divider";
+ io-channels = <&adc1 3>;
+ #io-channel-cells = <1>;
+
+ /*
+ * Scale the system voltage by 1127/127 to fit the ADC range.
+ * Use small nominator to prevent integer overflow.
+ */
+ output-ohms = <15>;
+ full-ohms = <133>;
+ };
+
+ p5v_aux_vd: voltage-divider2 {
+ compatible = "voltage-divider";
+ io-channels = <&adc1 5>;
+ #io-channel-cells = <1>;
+
+ /*
+ * Scale the system voltage by 1365/365 to fit the ADC range.
+ * Use small nominator to prevent integer overflow.
+ */
+ output-ohms = <50>;
+ full-ohms = <187>;
+ };
+
+ p5v_bmc_aux_vd: voltage-divider3 {
+ compatible = "voltage-divider";
+ io-channels = <&adc0 3>;
+ #io-channel-cells = <1>;
+
+ /*
+ * Scale the system voltage by 1365/365 to fit the ADC range.
+ * Use small nominator to prevent integer overflow.
+ */
+ output-ohms = <50>;
+ full-ohms = <187>;
+ };
+
+ p3v3_aux_vd: voltage-divider4 {
+ compatible = "voltage-divider";
+ io-channels = <&adc1 2>;
+ #io-channel-cells = <1>;
+
+ /*
+ * Scale the system voltage by 1698/698 to fit the ADC range.
+ * Use small nominator to prevent integer overflow.
+ */
+ output-ohms = <14>;
+ full-ohms = <34>;
+ };
+
+ p3v3_bmc_aux_vd: voltage-divider5 {
+ compatible = "voltage-divider";
+ io-channels = <&adc0 7>;
+ #io-channel-cells = <1>;
+
+ /*
+ * Scale the system voltage by 1698/698 to fit the ADC range.
+ * Use small nominator to prevent integer overflow.
+ */
+ output-ohms = <14>;
+ full-ohms = <34>;
+ };
+
+ p1v8_bmc_aux_vd: voltage-divider6 {
+ compatible = "voltage-divider";
+ io-channels = <&adc0 6>;
+ #io-channel-cells = <1>;
+
+ /*
+ * Scale the system voltage by 4000/3000 to fit the ADC range.
+ * Use small nominator to prevent integer overflow.
+ */
+ output-ohms = <3>;
+ full-ohms = <4>;
+ };
+
+ p2v5_aux_vd: voltage-divider7 {
+ compatible = "voltage-divider";
+ io-channels = <&adc1 1>;
+ #io-channel-cells = <1>;
+
+ /*
+ * Scale the system voltage by 2100/1100 to fit the ADC range.
+ * Use small nominator to prevent integer overflow.
+ */
+ output-ohms = <11>;
+ full-ohms = <21>;
+ };
+
+ p1v8_bmc_aux: fixedregulator-p1v8-bmc-aux {
+ compatible = "regulator-fixed";
+ regulator-name = "p1v8_bmc_aux";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+};
+
+&adc0 {
+ status = "okay";
+ vref-supply = <&p1v8_bmc_aux>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default
+ &pinctrl_adc1_default
+ &pinctrl_adc2_default
+ &pinctrl_adc3_default
+ &pinctrl_adc4_default
+ &pinctrl_adc5_default
+ &pinctrl_adc6_default
+ &pinctrl_adc7_default>;
+};
+
+&adc1 {
+ status = "okay";
+ vref-supply = <&p1v8_bmc_aux>;
+ aspeed,battery-sensing;
+
+ aspeed,int-vref-microvolt = <2500000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc8_default
+ &pinctrl_adc9_default
+ &pinctrl_adc10_default
+ &pinctrl_adc11_default
+ &pinctrl_adc12_default
+ &pinctrl_adc13_default
+ &pinctrl_adc14_default
+ &pinctrl_adc15_default>;
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&uhci {
+ status = "okay";
+};
+
+&gpio0 {
+ gpio-line-names =
+ /*A0-A7*/ "","","","","","","","",
+ /*B0-B7*/ "","","","","bmc-tpm-reset","","","",
+ /*C0-C7*/ "","","","","","","","",
+ /*D0-D7*/ "","","","","","","","",
+ /*E0-E7*/ "","","","","","","","",
+ /*F0-F7*/ "","","","","","","","",
+ /*G0-G7*/ "","","","","","","","",
+ /*H0-H7*/ "","","","","","","","",
+ /*I0-I7*/ "","","","","","","","",
+ /*J0-J7*/ "","","","","","","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","","","","bmc-ready",
+ /*M0-M7*/ "","","","","","","","",
+ /*N0-N7*/ "","","","","","","","",
+ /*O0-O7*/ "","","","","","","","",
+ /*P0-P7*/ "","","","","","","","bmc-hb",
+ /*Q0-Q7*/ "","","","","","","","",
+ /*R0-R7*/ "","","","","","","","",
+ /*S0-S7*/ "","","","","","","rear-enc-fault0","rear-enc-id0",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","","","","","","",
+ /*V0-V7*/ "","rtc-battery-voltage-read-enable","","power-chassis-control","","","","",
+ /*W0-W7*/ "","","","","","","","",
+ /*X0-X7*/ "","power-chassis-good","","","","","","",
+ /*Y0-Y7*/ "","","","","","","","",
+ /*Z0-Z7*/ "","","","","","","","";
+};
+
+&emmc_controller {
+ status = "okay";
+};
+
+&pinctrl_emmc_default {
+ bias-disable;
+};
+
+&emmc {
+ status = "okay";
+ clk-phase-mmc-hs200 = <180>, <180>;
+};
+
+&ibt {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&vuart1 {
+ status = "okay";
+};
+
+&vuart2 {
+ status = "okay";
+};
+
+&lpc_ctrl {
+ status = "okay";
+ memory-region = <&flash_memory>;
+};
+
+&mac2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii3_default>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+ <&syscon ASPEED_CLK_MAC3RCLK>;
+ clock-names = "MACCLK", "RCLK";
+ use-ncsi;
+};
+
+&mac3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii4_default>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+ <&syscon ASPEED_CLK_MAC4RCLK>;
+ clock-names = "MACCLK", "RCLK";
+ use-ncsi;
+};
+
+&wdt1 {
+ aspeed,reset-type = "none";
+ aspeed,external-signal;
+ aspeed,ext-push-pull;
+ aspeed,ext-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+ status = "okay";
+};
+
+&kcs2 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xca2>;
+ aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ eeprom at 50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ regulator at 60 {
+ compatible = "maxim,max8952";
+ reg = <0x60>;
+
+ max8952,default-mode = <0>;
+ max8952,dvs-mode-microvolt = <1250000>, <1200000>,
+ <1050000>, <950000>;
+ max8952,sync-freq = <0>;
+ max8952,ramp-speed = <0>;
+
+ regulator-name = "VR_v77_1v4";
+ regulator-min-microvolt = <770000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ regulator at 42 {
+ compatible = "infineon,ir38263";
+ reg = <0x42>;
+ };
+
+ led-controller at 60 {
+ compatible = "nxp,pca9552";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led at 0 {
+ label = "nic1-perst";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 1 {
+ label = "bmc-perst";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 2 {
+ label = "reset-M2-SSD1-2-perst";
+ reg = <2>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 3 {
+ label = "pcie-perst1";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 4 {
+ label = "pcie-perst2";
+ reg = <4>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 5 {
+ label = "pcie-perst3";
+ reg = <5>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 6 {
+ label = "pcie-perst4";
+ reg = <6>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 7 {
+ label = "pcie-perst5";
+ reg = <7>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 8 {
+ label = "pcie-perst6";
+ reg = <8>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 9 {
+ label = "pcie-perst7";
+ reg = <9>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 10 {
+ label = "pcie-perst8";
+ reg = <10>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 11 {
+ label = "PV-cp0-sw1stk4-perst";
+ reg = <11>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 12 {
+ label = "PV-cp0-sw1stk5-perst";
+ reg = <12>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 13 {
+ label = "pe-cp-drv0-perst";
+ reg = <13>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 14 {
+ label = "pe-cp-drv1-perst";
+ reg = <14>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 15 {
+ label = "lom-perst";
+ reg = <15>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ gpio at 74 {
+ compatible = "nxp,pca9539";
+ reg = <0x74>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "PLUG_DETECT_PCIE_J101_N",
+ "PLUG_DETECT_PCIE_J102_N",
+ "PLUG_DETECT_PCIE_J103_N",
+ "PLUG_DETECT_PCIE_J104_N",
+ "PLUG_DETECT_PCIE_J105_N",
+ "PLUG_DETECT_PCIE_J106_N",
+ "PLUG_DETECT_PCIE_J107_N",
+ "PLUG_DETECT_PCIE_J108_N",
+ "PLUG_DETECT_M2_SSD1_N",
+ "PLUG_DETECT_NIC1_N",
+ "SEL_SMB_DIMM_CPU0",
+ "presence-ps2",
+ "presence-ps3",
+ "", "",
+ "PWRBRD_PLUG_DETECT2_N";
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ power-supply at 58 {
+ compatible = "ibm,cffps";
+ reg = <0x58>;
+ };
+
+ power-supply at 59 {
+ compatible = "ibm,cffps";
+ reg = <0x59>;
+ };
+
+ power-supply at 5a {
+ compatible = "ibm,cffps";
+ reg = <0x5a>;
+ };
+
+ power-supply at 5b {
+ compatible = "ibm,cffps";
+ reg = <0x5b>;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+
+ i2c-mux at 70 {
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c3mux0chn0: i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c3mux0chn1: i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c3mux0chn2: i2c at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c3mux0chn3: i2c at 3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ i2c3mux0chn4: i2c at 4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ i2c3mux0chn5: i2c at 5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ i2c3mux0chn6: i2c at 6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ i2c3mux0chn7: i2c at 7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+
+ regulator at 42 {
+ compatible = "infineon,ir38263";
+ reg = <0x42>;
+ };
+
+ regulator at 43 {
+ compatible = "infineon,ir38060";
+ reg = <0x43>;
+ };
+};
+
+&i2c6 {
+ status = "okay";
+
+ fan-controller at 52 {
+ compatible = "maxim,max31785a";
+ reg = <0x52>;
+ };
+
+ fan-controller at 54 {
+ compatible = "maxim,max31785a";
+ reg = <0x54>;
+ };
+
+ eeprom at 55 {
+ compatible = "atmel,24c64";
+ reg = <0x55>;
+ };
+
+ i2c-mux at 70 {
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c6mux0chn0: i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c6mux0chn1: i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c6mux0chn2: i2c at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c6mux0chn3: i2c at 3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ i2c6mux0chn4: i2c at 4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+
+ humidity-sensor at 40 {
+ compatible = "ti,hdc1080";
+ reg = <0x40>;
+ };
+
+ temperature-sensor at 48 {
+ compatible = "ti,tmp275";
+ reg = <0x48>;
+ };
+
+ eeprom at 50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ };
+
+ led-controller at 60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led at 0 {
+ label = "enclosure-id-led";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 1 {
+ label = "attention-led";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 2 {
+ label = "enclosure-fault-rollup-led";
+ reg = <2>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 3 {
+ label = "power-on-led";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ temperature-sensor at 76 {
+ compatible = "infineon,dps310";
+ reg = <0x76>;
+ };
+ };
+
+ i2c6mux0chn5: i2c at 5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ i2c6mux0chn6: i2c at 6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ i2c6mux0chn7: i2c at 7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ pca3: gpio at 74 {
+ compatible = "nxp,pca9539";
+ reg = <0x74>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ pca4: gpio at 77 {
+ compatible = "nxp,pca9539";
+ reg = <0x77>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "PE_NVMED0_EXP_PRSNT_N",
+ "PE_NVMED1_EXP_PRSNT_N",
+ "PE_NVMED2_EXP_PRSNT_N",
+ "PE_NVMED3_EXP_PRSNT_N",
+ "LED_FAULT_NVMED0",
+ "LED_FAULT_NVMED1",
+ "LED_FAULT_NVMED2",
+ "LED_FAULT_NVMED3",
+ "FAN0_PRESENCE_R_N",
+ "FAN1_PRESENCE_R_N",
+ "FAN2_PRESENCE_R_N",
+ "FAN3_PRESENCE_R_N",
+ "FAN4_PRESENCE_R_N",
+ "FAN5_PRESENCE_N",
+ "FAN6_PRESENCE_N",
+ "";
+ };
+};
+
+&i2c7 {
+ status = "okay";
+
+ i2c-mux at 70 {
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c7mux0chn0: i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c7mux0chn1: i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c7mux0chn2: i2c at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c7mux0chn3: i2c at 3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ regulator at 58 {
+ compatible = "mps,mp2973";
+ reg = <0x58>;
+ };
+ };
+
+ i2c7mux0chn4: i2c at 4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ i2c7mux0chn5: i2c at 5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+
+ regulator at 40 {
+ compatible = "infineon,tda38640";
+ reg = <0x40>;
+ };
+ };
+
+ i2c7mux0chn6: i2c at 6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ i2c7mux0chn7: i2c at 7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+&i2c8 {
+ status = "okay";
+
+ i2c-mux at 71 {
+ compatible = "nxp,pca9548";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c8mux0chn0: i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ regulator at 58 {
+ compatible = "mps,mp2971";
+ reg = <0x58>;
+ };
+ };
+
+ i2c8mux0chn1: i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ regulator at 40 {
+ compatible = "infineon,tda38640";
+ reg = <0x40>;
+ };
+
+ regulator at 41 {
+ compatible = "infineon,tda38640";
+ reg = <0x41>;
+ };
+
+ regulator at 58 {
+ compatible = "mps,mp2971";
+ reg = <0x58>;
+ };
+
+ regulator at 5b {
+ compatible = "mps,mp2971";
+ reg = <0x5b>;
+ };
+ };
+
+ i2c8mux0chn2: i2c at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c8mux0chn3: i2c at 3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ i2c8mux0chn4: i2c at 4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+
+ i2c-mux at 70 {
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c8mux1chn0: i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c8mux1chn1: i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c8mux1chn2: i2c at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c8mux1chn3: i2c at 3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ i2c8mux1chn4: i2c at 4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ i2c8mux1chn5: i2c at 5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ i2c8mux1chn6: i2c at 6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ i2c8mux1chn7: i2c at 7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+ };
+
+ i2c8mux0chn5: i2c at 5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ i2c8mux0chn6: i2c at 6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+
+ temperature-sensor at 4c {
+ compatible = "ti,tmp423";
+ reg = <0x4c>;
+ };
+ };
+
+ i2c8mux0chn7: i2c at 7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+
+ regulator at 40 {
+ compatible = "infineon,ir38060";
+ reg = <0x40>;
+ };
+ };
+ };
+};
+
+&i2c9 {
+ status = "okay";
+
+ regulator at 40 {
+ compatible = "infineon,ir38263";
+ reg = <0x40>;
+ };
+
+ regulator at 41 {
+ compatible = "infineon,ir38263";
+ reg = <0x41>;
+ };
+
+ eeprom at 50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ regulator at 60 {
+ compatible = "maxim,max8952";
+ reg = <0x60>;
+
+ max8952,default-mode = <0>;
+ max8952,dvs-mode-microvolt = <1250000>, <1200000>,
+ <1050000>, <950000>;
+ max8952,sync-freq = <0>;
+ max8952,ramp-speed = <0>;
+
+ regulator-name = "VR_v77_1v4";
+ regulator-min-microvolt = <770000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&i2c11 {
+ status = "okay";
+
+ tpm at 2e {
+ compatible = "tcg,tpm-tis-i2c";
+ reg = <0x2e>;
+ memory-region = <&eventlog>;
+ };
+};
+
+&i2c12 {
+ status = "okay";
+};
+
+&i2c13 {
+ status = "okay";
+
+ regulator at 41 {
+ compatible = "infineon,ir38263";
+ reg = <0x41>;
+ };
+
+ led-controller at 61 {
+ compatible = "nxp,pca9552";
+ reg = <0x61>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led at 0 {
+ label = "efuse-12v-slots";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 1 {
+ label = "efuse-3p3v-slot";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 3 {
+ label = "nic2-pert";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 4 {
+ label = "pcie-perst9";
+ reg = <4>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 5 {
+ label = "pcie-perst10";
+ reg = <5>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 6 {
+ label = "pcie-perst11";
+ reg = <6>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 7 {
+ label = "pcie-perst12";
+ reg = <7>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 8 {
+ label = "pcie-perst13";
+ reg = <8>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 9 {
+ label = "pcie-perst14";
+ reg = <9>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 10 {
+ label = "pcie-perst15";
+ reg = <10>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 11 {
+ label = "pcie-perst16";
+ reg = <11>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 12 {
+ label = "PV-cp1-sw1stk4-perst";
+ reg = <12>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 13 {
+ label = "PV-cp1-sw1stk5-perst";
+ reg = <13>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 14 {
+ label = "pe-cp-drv2-perst";
+ reg = <14>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 15 {
+ label = "pe-cp-drv3-perst";
+ reg = <15>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ gpio at 75 {
+ compatible = "nxp,pca9539";
+ reg = <0x75>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "PLUG_DETECT_PCIE_J109_N",
+ "PLUG_DETECT_PCIE_J110_N",
+ "PLUG_DETECT_PCIE_J111_N",
+ "PLUG_DETECT_PCIE_J112_N",
+ "PLUG_DETECT_PCIE_J113_N",
+ "PLUG_DETECT_PCIE_J114_N",
+ "PLUG_DETECT_PCIE_J115_N",
+ "PLUG_DETECT_PCIE_J116_N",
+ "PLUG_DETECT_M2_SSD2_N",
+ "PLUG_DETECT_NIC2_N",
+ "SEL_SMB_DIMM_CPU1",
+ "presence-ps0",
+ "presence-ps1",
+ "", "",
+ "PWRBRD_PLUG_DETECT1_N";
+ };
+
+ gpio at 76 {
+ compatible = "nxp,pca9539";
+ reg = <0x76>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "SW1_BOOTRCVRYB1_N",
+ "SW1_BOOTRCVRYB0_N",
+ "SW2_BOOTRCVRYB1_N",
+ "SW2_BOOTRCVRYB0_N",
+ "SW3_4_BOOTRCVRYB1_N",
+ "SW3_4_BOOTRCVRYB0_N",
+ "SW5_BOOTRCVRYB1_N",
+ "SW5_BOOTRCVRYB0_N",
+ "SW6_BOOTRCVRYB1_N",
+ "SW6_BOOTRCVRYB0_N",
+ "SW1_RESET_N",
+ "SW3_RESET_N",
+ "SW4_RESET_N",
+ "SW2_RESET_N",
+ "SW5_RESET_N",
+ "SW6_RESET_N";
+ };
+};
+
+&i2c14 {
+ status = "okay";
+
+ i2c-mux at 70 {
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c14mux0chn0: i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c14mux0chn1: i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c14mux0chn2: i2c at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c14mux0chn3: i2c at 3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ regulator at 58 {
+ compatible = "mps,mp2973";
+ reg = <0x58>;
+ };
+ };
+
+ i2c14mux0chn4: i2c at 4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ i2c14mux0chn5: i2c at 5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+
+ regulator at 40 {
+ compatible = "infineon,tda38640";
+ reg = <0x40>;
+ };
+ };
+
+ i2c14mux0chn6: i2c at 6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ i2c14mux0chn7: i2c at 7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+&i2c15 {
+ status = "okay";
+
+ i2c-mux at 71 {
+ compatible = "nxp,pca9548";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c15mux0chn0: i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ regulator at 58 {
+ compatible = "mps,mp2971";
+ reg = <0x58>;
+ };
+ };
+
+ i2c15mux0chn1: i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ regulator at 40 {
+ compatible = "infineon,tda38640";
+ reg = <0x40>;
+ };
+
+ regulator at 41 {
+ compatible = "infineon,tda38640";
+ reg = <0x41>;
+ };
+
+ regulator at 58 {
+ compatible = "mps,mp2971";
+ reg = <0x58>;
+ };
+
+ regulator at 5b {
+ compatible = "mps,mp2971";
+ reg = <0x5b>;
+ };
+ };
+
+ i2c15mux0chn2: i2c at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c15mux0chn3: i2c at 3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ i2c15mux0chn4: i2c at 4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+
+ i2c-mux at 70 {
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c15mux1chn0: i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c15mux1chn1: i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c15mux1chn2: i2c at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c15mux1chn3: i2c at 3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ i2c15mux1chn4: i2c at 4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ i2c15mux1chn5: i2c at 5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ i2c15mux1chn6: i2c at 6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ i2c15mux1chn7: i2c at 7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+ };
+
+ i2c15mux0chn5: i2c at 5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ i2c15mux0chn6: i2c at 6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+
+ temperature-sensor at 4c {
+ compatible = "ti,tmp423";
+ reg = <0x4c>;
+ };
+ };
+
+ i2c15mux0chn7: i2c at 7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+
+ regulator at 40 {
+ compatible = "infineon,ir38060";
+ reg = <0x40>;
+ };
+
+ temperature-sensor at 4c {
+ compatible = "ti,tmp423";
+ reg = <0x4c>;
+ };
+ };
+ };
+};
--
2.39.2
More information about the Linux-aspeed
mailing list