[PATCH v2] dt-bindings: gpio: aspeed,ast2400-gpio: Convert to DT schema

[Andrew Jeffery]

Squash warnings such as:

```
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb: /ahb/apb at 1e600000/gpio at 1e780000: failed to match any schema with compatible: ['aspeed,ast2400-gpio']
```

Signed-off-by: Andrew Jeffery <andrew at codeconstruct.com.au>
---
v2: Address feedback from Krzysztof:
    https://lore.kernel.org/all/0d1dd262-b6dd-4d71-9239-8b0aec8cceff@linaro.org/

v1: https://lore.kernel.org/all/20240220052918.742793-1-andrew@codeconstruct.com.au/

 .../bindings/gpio/aspeed,ast2400-gpio.yaml    | 73 +++++++++++++++++++
 .../devicetree/bindings/gpio/gpio-aspeed.txt  | 39 ----------
 2 files changed, 73 insertions(+), 39 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/gpio/aspeed,ast2400-gpio.yaml
 delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-aspeed.txt

diff --git a/Documentation/devicetree/bindings/gpio/aspeed,ast2400-gpio.yaml b/Documentation/devicetree/bindings/gpio/aspeed,ast2400-gpio.yaml
new file mode 100644
index 000000000000..74d376567dfc
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/aspeed,ast2400-gpio.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed GPIO controller
+
+maintainers:
+  - Andrew Jeffery <andrew at codeconstruct.com.au>
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2400-gpio
+      - aspeed,ast2500-gpio
+      - aspeed,ast2600-gpio
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: The clock to use for debounce timings
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+  gpio-line-names: true
+  gpio-ranges: true
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  ngpios: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+  - "#gpio-cells"
+  - gpio-controller
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: aspeed,ast2600-gpio
+    then:
+      required:
+        - ngpios
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio at 1e780000 {
+        compatible = "aspeed,ast2400-gpio";
+        reg = <0x1e780000 0x1000>;
+        interrupts = <20>;
+        interrupt-controller;
+        #gpio-cells = <2>;
+        gpio-controller;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt b/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt
deleted file mode 100644
index b2033fc3a71a..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Aspeed GPIO controller Device Tree Bindings
--------------------------------------------
-
-Required properties:
-- compatible		: Either "aspeed,ast2400-gpio", "aspeed,ast2500-gpio",
-					or "aspeed,ast2600-gpio".
-
-- #gpio-cells 		: Should be two
-			  - First cell is the GPIO line number
-			  - Second cell is used to specify optional
-			    parameters (unused)
-
-- reg			: Address and length of the register set for the device
-- gpio-controller	: Marks the device node as a GPIO controller.
-- interrupts		: Interrupt specifier (see interrupt bindings for
-			  details)
-- interrupt-controller	: Mark the GPIO controller as an interrupt-controller
-
-Optional properties:
-
-- clocks		: A phandle to the clock to use for debounce timings
-- ngpios		: Number of GPIOs controlled by this controller. Should	be set
-				  when there are multiple GPIO controllers on a SoC (ast2600).
-
-The gpio and interrupt properties are further described in their respective
-bindings documentation:
-
-- Documentation/devicetree/bindings/gpio/gpio.txt
-- Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
-  Example:
-	gpio at 1e780000 {
-		#gpio-cells = <2>;
-		compatible = "aspeed,ast2400-gpio";
-		gpio-controller;
-		interrupts = <20>;
-		reg = <0x1e780000 0x1000>;
-		interrupt-controller;
-	};
-- 
2.39.2