[PATCH v2 2/4] hwmon: (pmbus/crps) Add Intel CRPS185 power supply
Guenter Roeck
linux at roeck-us.net
Tue Dec 17 05:26:06 AEDT 2024
On 12/16/24 09:50, Ninad Palsule wrote:
> Add the driver to monitor Intel common redundant power supply (crps185)
> with hwmon over pmbus.
>
> Signed-off-by: Ninad Palsule <ninad at linux.ibm.com>
> ---
> Documentation/hwmon/crps.rst | 97 +++++++++++++++++++++++++++++++++++
> Documentation/hwmon/index.rst | 1 +
> MAINTAINERS | 7 +++
> drivers/hwmon/pmbus/Kconfig | 9 ++++
> drivers/hwmon/pmbus/Makefile | 1 +
> drivers/hwmon/pmbus/crps.c | 79 ++++++++++++++++++++++++++++
> 6 files changed, 194 insertions(+)
> create mode 100644 Documentation/hwmon/crps.rst
> create mode 100644 drivers/hwmon/pmbus/crps.c
>
> diff --git a/Documentation/hwmon/crps.rst b/Documentation/hwmon/crps.rst
> new file mode 100644
> index 000000000000..74570ed1e978
> --- /dev/null
> +++ b/Documentation/hwmon/crps.rst
> @@ -0,0 +1,97 @@
> +.. SPDX-License-Identifier: GPL-2.0-or-later
> +
> +Kernel driver crps
> +==================
> +
> +Supported chips:
> +
> + * Intel CRPS185
> +
> + Prefix: 'crps185'
> +
> + Addresses scanned: -
> +
> + Datasheet: Publicly not available.
Maybe "Only available under NDA". Or at least that is what I found.
> +
> +Authors:
> + Ninad Palsule <ninad at linux.ibm.com>
> +
> +
> +Description
> +-----------
> +
> +This driver implements support for Intel Common Redundant Power supply with
> +PMBus support.
> +
> +The driver is a client driver to the core PMBus driver.
> +Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
> +
> +
> +Usage Notes
> +-----------
> +
> +This driver does not auto-detect devices. You will have to instantiate the
> +devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
> +details.
> +
> +
> +Sysfs entries
> +-------------
> +
> +======================= ======================================================
> +curr1_label "iin"
> +curr1_input Measured input current
> +curr1_max Maximum input current
> +curr1_max_alarm Input maximum current high alarm
> +curr1_crit Critial high input current
> +curr1_crit_alarm Input critical current high alarm
> +curr1_rated_max Maximum rated input current
> +
> +curr2_label "iout1"
> +curr2_input Measured output current
> +curr2_max Maximum output current
> +curr2_max_alarm Output maximum current high alarm
> +curr2_crit Critial high output current
> +curr2_crit_alarm Output critical current high alarm
> +curr2_rated_max Maximum rated output current
> +
> +in1_label "vin"
> +in1_input Measured input voltage
> +in1_crit Critical input over voltage
> +in1_crit_alarm Critical input over voltage alarm
> +in1_max Maximum input over voltage
> +in1_max_alarm Maximum input over voltage alarm
> +in1_rated_min Minimum rated input voltage
> +in1_rated_max Maximum rated input voltage
> +
> +in2_label "vout1"
> +in2_input Measured input voltage
> +in2_crit Critical input over voltage
> +in2_crit_alarm Critical input over voltage alarm
> +in2_lcrit Critical input under voltage fault
> +in2_lcrit_alarm Critical input under voltage fault alarm
> +in2_max Maximum input over voltage
> +in2_max_alarm Maximum input over voltage alarm
> +in2_min Minimum input under voltage warning
> +in2_min_alarm Minimum input under voltage warning alarm
> +in2_rated_min Minimum rated input voltage
> +in2_rated_max Maximum rated input voltage
> +
> +power1_label "pin"
> +power1_input Measured input power
> +power1_alarm Input power high alarm
> +power1_max Maximum input power
> +power1_rated_max Maximum rated input power
> +
> +temp[1-2]_input Measured temperature
> +temp[1-2]_crit Critical temperature
> +temp[1-2]_crit_alarm Critical temperature alarm
> +temp[1-2]_max Maximum temperature
> +temp[1-2]_max_alarm Maximum temperature alarm
> +temp[1-2]_rated_max Maximum rated temperature
> +
> +fan1_alarm Fan 1 warning.
> +fan1_fault Fan 1 fault.
> +fan1_input Fan 1 speed in RPM.
> +fan1_target Fan 1 target.
> +======================= ======================================================
Does this pass "make htmldocs" ?
> diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
> index 1a3cb0a59f72..b1ea445479b0 100644
> --- a/Documentation/hwmon/index.rst
> +++ b/Documentation/hwmon/index.rst
> @@ -58,6 +58,7 @@ Hardware Monitoring Kernel Drivers
> corsair-cpro
> corsair-psu
> cros_ec_hwmon
> + crps
> da9052
> da9055
> dell-smm-hwmon
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 637ddd44245f..e99f26f75733 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -6100,6 +6100,13 @@ L: linux-input at vger.kernel.org
> S: Maintained
> F: drivers/hid/hid-creative-sb0540.c
>
> +INTEL CRPS COMMON REDUNDANT PSU DRIVER
> +M: Ninad Palsule <ninad at linux.ibm.com>
> +L: linux-hwmon at vger.kernel.org
> +S: Maintained
> +F: Documentation/hwmon/crps.rst
> +F: drivers/hwmon/pmbus/crps.c
> +
> CRYPTO API
> M: Herbert Xu <herbert at gondor.apana.org.au>
> M: "David S. Miller" <davem at davemloft.net>
> diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
> index 22418a05ced0..43b6df04e0f9 100644
> --- a/drivers/hwmon/pmbus/Kconfig
> +++ b/drivers/hwmon/pmbus/Kconfig
> @@ -85,6 +85,15 @@ config SENSORS_BPA_RS600
> This driver can also be built as a module. If so, the module will
> be called bpa-rs600.
>
> +config SENSORS_CRPS
> + tristate "Intel Common Redundant Power Supply"
> + help
> + If you say yes here you get hardware monitoring support for the Intel
> + Common Redundant Power Supply.
> +
> + This driver can also be built as a module. If so, the module will
> + be called crps.
> +
> config SENSORS_DELTA_AHE50DC_FAN
> tristate "Delta AHE-50DC fan control module"
> help
> diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
> index 3d3183f8d2a7..c7eb7739b7f8 100644
> --- a/drivers/hwmon/pmbus/Makefile
> +++ b/drivers/hwmon/pmbus/Makefile
> @@ -62,3 +62,4 @@ obj-$(CONFIG_SENSORS_XDPE122) += xdpe12284.o
> obj-$(CONFIG_SENSORS_XDPE152) += xdpe152c4.o
> obj-$(CONFIG_SENSORS_ZL6100) += zl6100.o
> obj-$(CONFIG_SENSORS_PIM4328) += pim4328.o
> +obj-$(CONFIG_SENSORS_CRPS) += crps.o
> diff --git a/drivers/hwmon/pmbus/crps.c b/drivers/hwmon/pmbus/crps.c
> new file mode 100644
> index 000000000000..09425c404fc8
> --- /dev/null
> +++ b/drivers/hwmon/pmbus/crps.c
> @@ -0,0 +1,79 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright 2024 IBM Corp.
> + */
> +
> +#include <linux/i2c.h>
> +#include <linux/of.h>
> +#include <linux/pmbus.h>
> +
> +#include "pmbus.h"
> +
> +static const struct i2c_device_id crps_id[] = {
> + { "intel_crps185" },
> + {}
> +};
> +MODULE_DEVICE_TABLE(i2c, crps_id);
> +
> +static struct pmbus_driver_info crps_info = {
> + .pages = 1,
> + /* PSU uses default linear data format. */
> + .func[0] = PMBUS_HAVE_PIN | PMBUS_HAVE_IOUT |
> + PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_IIN |
> + PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT |
> + PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
> + PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 |
> + PMBUS_HAVE_STATUS_TEMP |
> + PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12,
> +};
> +
> +static int crps_probe(struct i2c_client *client)
> +{
> + int rc;
> + struct device *dev = &client->dev;
> + char buf[I2C_SMBUS_BLOCK_MAX + 2] = { 0 };
> +
> + rc = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, buf);
> + if (rc < 0) {
> + dev_err_probe(dev, rc, "Failed to read PMBUS_MFR_MODEL\n");
> + return rc;
return dev_err_probe(...);
> + }
> +
> + if (strncmp(buf, "03NK260", 7) == 7) {
strncmp() never returns 7. You probably want something like
if (rc != 7 || strncmp(buf, "03NK260", 7)) {
> + buf[rc] = '\0';
> + dev_err_probe(dev, -ENODEV, "Model '%s' not supported\n", buf);
return dev_err_probe(...);
> + return -ENODEV;
> + }
> +
> + rc = pmbus_do_probe(client, &crps_info);
> + if (rc) {
> + dev_err_probe(dev, rc, "Failed to probe %d\n", rc);
dev_err_probe() already handles the error, and a message such as
"failed to probe -22" isn't very useful anyway. Also,
return dev_err_probe(...);
> + return rc;
> + }
> +
> + return 0;
> +}
> +
> +static const struct of_device_id crps_of_match[] = {
> + {
> + .compatible = "intel,crps185",
> + },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, crps_of_match);
> +
> +static struct i2c_driver crps_driver = {
> + .driver = {
> + .name = "crps",
> + .of_match_table = crps_of_match,
> + },
> + .probe = crps_probe,
> + .id_table = crps_id,
> +};
> +
> +module_i2c_driver(crps_driver);
> +
> +MODULE_AUTHOR("Ninad Palsule");
> +MODULE_DESCRIPTION("PMBus driver for Intel Common Redundant power supplies");
> +MODULE_LICENSE("GPL");
> +MODULE_IMPORT_NS("PMBUS");
More information about the Linux-aspeed
mailing list