[PATCH v3 0/6] Introduce ASPEED AST27XX BMC SoC

[Kevin Chen]

Hi,

> > ---
> > v3:
> >   - Split clk and reset driver to other commits, which are in series
> > of
> >     "Add support for AST2700 clk driver".
> >   - For BMC console by UART12, add uart12 using ASPEED INTC
> > architecture.
> >
> > aspeed,ast2700-intc.yaml
> >   - Add minItems to 1 to fix the warning by "make dtbs_check W=1".
> >   - Add intc1 into example.
> >
> > Kconfig.platforms
> >   - Remove MACH_ASPEED_G7.
> >
> > Kevin Chen (6):
> >   dt-bindings: interrupt-controller: Refine size/interrupt-cell usage.
> >   dt-bindings: arm: aspeed: Add ASPEED AST27XX SoC
> >   arm64: aspeed: Add support for ASPEED AST27XX BMC SoC
> >   arm64: dts: aspeed: Add initial AST27XX device tree
> >   arm64: dts: aspeed: Add initial AST2700 EVB device tree
> >   arm64: defconfig: Add ASPEED AST2700 family support
> 
> Do you mind sending a v4, because I received a confusing arrangement of
> patches:
OK. I put a mixed commits in our send-mail server. I will try to send v4 patches.
Thanks for your reminder.

> 
> [PATCH v3 1/6] dt-bindings: arm: aspeed: Add ASPEED AST27XX SoC [PATCH v3
> 1/6] dt-bindings: interrupt-controller: Refine size/interrupt-cell usage.
> [PATCH v3 2/6] dt-bindings: arm: aspeed: Add ASPEED AST27XX SoC [PATCH v3
> 2/6] dt-bindings: interrupt-controller: Fix the size-cells in ast2700-intc ...
> 
> Where the content of
> 
>    [PATCH v3 1/6] dt-bindings: arm: aspeed: Add ASPEED AST27XX SoC
> 
> and
> 
>    [PATCH v3 2/6] dt-bindings: arm: aspeed: Add ASPEED AST27XX SoC
> 
> Differs, as does the content of
> 
>    [PATCH v3 1/6] dt-bindings: interrupt-controller: Refine size/interrupt-cell
> usage.
> 
> and
> 
>    [PATCH v3 2/6] dt-bindings: interrupt-controller: Fix the size-cells in
> ast2700-intc
> 
> Despite sounding like they might have the same intent
> 
> Andrew