[PATCH v1 5/8] ARM: dts: aspeed: system1: Update LED gpio name
Ninad Palsule
ninad at linux.ibm.com
Sat Dec 14 01:50:31 AEDT 2024
From: NINAD PALSULE <ninadpalsule at us.ibm.com>
Rename LEDs with meaningful names for easier identification.
Signed-off-by: Ninad Palsule <ninad at linux.ibm.com>
---
.../dts/aspeed/aspeed-bmc-ibm-system1.dts | 36 +++++++++----------
1 file changed, 18 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
index ebbb14241256..149b9ad23dbb 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
@@ -116,63 +116,63 @@ vga_memory: region at bf000000 {
leds {
compatible = "gpio-leds";
- led-0 {
+ led-bmc-ready {
gpios = <&gpio0 ASPEED_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
};
- led-1 {
+ led-bmc-hb {
gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_HIGH>;
};
- led-2 {
+ led-rear-enc-fault0 {
gpios = <&gpio0 ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
};
- led-3 {
+ led-rear-enc-id0 {
gpios = <&gpio0 ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
};
- led-4 {
+ led-fan0-fault {
gpios = <&pca3 5 GPIO_ACTIVE_LOW>;
};
- led-5 {
+ led-fan1-fault {
gpios = <&pca3 6 GPIO_ACTIVE_LOW>;
};
- led-6 {
+ led-fan2-fault {
gpios = <&pca3 7 GPIO_ACTIVE_LOW>;
};
- led-7 {
+ led-fan3-fault {
gpios = <&pca3 8 GPIO_ACTIVE_LOW>;
};
- led-8 {
+ led-fan4-fault {
gpios = <&pca3 9 GPIO_ACTIVE_LOW>;
};
- led-9 {
+ led-fan5-fault {
gpios = <&pca3 10 GPIO_ACTIVE_LOW>;
};
- led-a {
+ led-fan6-fault {
gpios = <&pca3 11 GPIO_ACTIVE_LOW>;
};
- led-b {
+ led-nvmed0-fault {
gpios = <&pca4 4 GPIO_ACTIVE_HIGH>;
};
- led-c {
+ led-nvmed1-fault {
gpios = <&pca4 5 GPIO_ACTIVE_HIGH>;
};
- led-d {
+ led-nvmed2-fault {
gpios = <&pca4 6 GPIO_ACTIVE_HIGH>;
};
- led-e {
+ led-nvmed3-fault {
gpios = <&pca4 7 GPIO_ACTIVE_HIGH>;
};
};
@@ -368,14 +368,14 @@ &gpio0 {
/*I0-I7*/ "","","","","","","","",
/*J0-J7*/ "","","","","","","","",
/*K0-K7*/ "","","","","","","","",
- /*L0-L7*/ "","","","","","","","bmc-ready",
+ /*L0-L7*/ "","","","","","","","led-bmc-ready",
/*M0-M7*/ "","","","","","","","",
/*N0-N7*/ "pch-reset","","","","","flash-write-override","","",
/*O0-O7*/ "","","","","","","","",
- /*P0-P7*/ "","","","","","","","bmc-hb",
+ /*P0-P7*/ "","","","","","","","led-bmc-hb",
/*Q0-Q7*/ "","","","","","","pch-ready","",
/*R0-R7*/ "","","","","","","","",
- /*S0-S7*/ "","","","","","","rear-enc-fault0","rear-enc-id0",
+ /*S0-S7*/ "","","","","","","led-rear-enc-fault0","led-rear-enc-id0",
/*T0-T7*/ "","","","","","","","",
/*U0-U7*/ "","","","","","","","",
/*V0-V7*/ "","rtc-battery-voltage-read-enable","","power-chassis-control","","","","",
--
2.43.0
More information about the Linux-aspeed
mailing list