[PATCH v2 2/2] ARM: dts: aspeed: Harma: update sgpio line name

Peter Yin peteryin.openbmc at gmail.com
Fri Aug 30 19:21:47 AEST 2024


power-card-enable
uart-switch-button
power-fault-n
asic0-card-type-detection0-n
asic0-card-type-detection1-n
asic0-card-type-detection2-n
uart-switch-lsb
uart-switch-msb
presence-cmm

Signed-off-by: Peter Yin <peteryin.openbmc at gmail.com>
---
 .../dts/aspeed/aspeed-bmc-facebook-harma.dts  | 32 ++++++++-----------
 1 file changed, 14 insertions(+), 18 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
index 92068c65eae4..5440181730f6 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -393,12 +393,6 @@ gpio at 31 {
 		reg = <0x31>;
 		gpio-controller;
 		#gpio-cells = <2>;
-
-		gpio-line-names =
-		"","","","",
-		"","","presence-cmm","",
-		"","","","",
-		"","","","";
 	};
 
 	// PTTV FRU
@@ -422,12 +416,6 @@ gpio at 31 {
 		reg = <0x31>;
 		gpio-controller;
 		#gpio-cells = <2>;
-
-		gpio-line-names =
-		"","","","",
-		"","","presence-cmm","",
-		"","","","",
-		"","","","";
 	};
 
 	// Aegis FRU
@@ -566,7 +554,7 @@ &gpio0 {
 	/*B0-B7*/	"","","","",
 			"bmc-spi-mux-select-0","led-identify","","",
 	/*C0-C7*/	"reset-cause-platrst","","","","",
-			"cpu0-err-alert","","",
+			"cpu0-err-alert","power-card-enable","",
 	/*D0-D7*/	"","","sol-uart-select","","","","","",
 	/*E0-E7*/	"","","","","","","","",
 	/*F0-F7*/	"","","","","","","","",
@@ -585,7 +573,9 @@ &gpio0 {
 	/*O0-O7*/	"","","","","","","","",
 	/*P0-P7*/	"power-button","power-host-control",
 			"reset-button","","led-power","","","",
-	/*Q0-Q7*/	"","","","","","power-chassis-control","","",
+	/*Q0-Q7*/
+			"","","","",
+			"","power-chassis-control","","uart-switch-button",
 	/*R0-R7*/	"","","","","","","","",
 	/*S0-S7*/	"","","","","","","","",
 	/*T0-T7*/	"","","","","","","","",
@@ -673,7 +663,7 @@ &sgpiom0 {
 	"presence-asic-modules-0","rt-cpu0-p1-force-enable",
 	"presence-asic-modules-1","bios-debug-msg-disable",
 	"","uart-control-buffer-select",
-	"","ac-control-n",
+	"presence-cmm","ac-control-n",
 	/*G0-G3 line 96-103*/
 	"FM_CPU_CORETYPE2","",
 	"FM_CPU_CORETYPE1","",
@@ -685,7 +675,7 @@ &sgpiom0 {
 	"FM_BOARD_REV_ID2","",
 	"FM_BOARD_REV_ID1","",
 	/*H0-H3 line 112-119*/
-	"FM_BOARD_REV_ID0","",
+	"FM_BOARD_REV_ID0","reset-control-cmos-clear",
 	"","","","","","",
 	/*H4-H7 line 120-127*/
 	"","",
@@ -716,9 +706,15 @@ &sgpiom0 {
 	"cpu0-thermtrip-alert","",
 	"reset-cause-pcie","",
 	/*L4-L7 line 184-191*/
-	"pvdd11-ocp-alert","","","","","","","",
+	"pvdd11-ocp-alert","",
+	"power-fault-n","",
+	"asic0-card-type-detection0-n","",
+	"asic0-card-type-detection1-n","",
 	/*M0-M3 line 192-199*/
-	"","","","","","","","",
+	"asic0-card-type-detection2-n","",
+	"uart-switch-lsb","",
+	"uart-switch-msb","",
+	"","",
 	/*M4-M7 line 200-207*/
 	"","","","","","","","",
 	/*N0-N3 line 208-215*/
-- 
2.25.1



More information about the Linux-aspeed mailing list