[PATCH v13 27/29] ARM: dts: aspeed: yosemite4: Adjust ioexp bus and remove mctp driver

Delphine CC Chiu Delphine_CC_Chiu at wiwynn.com
Wed Aug 21 19:40:38 AEST 2024


Adjust CPLD io expender for PVT stage.
Add GPIO name for GPIOO7.
Only binding MCTP driver on the down-stream port of the mux.
Remove unnecessary driver binding since there's no MCTP device before the mux.

Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu at wiwynn.com>
---
 .../aspeed/aspeed-bmc-facebook-yosemite4.dts  | 59 +++++++++----------
 1 file changed, 29 insertions(+), 30 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index f139f426099e..abd4a9173de4 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -1156,6 +1156,34 @@ rtc at 6f {
 				compatible = "nuvoton,nct3018y";
 				reg = <0x6f>;
 			};
+
+			gpio at 20 {
+				compatible = "nxp,pca9506";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio at 21 {
+				compatible = "nxp,pca9506";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio at 22 {
+				compatible = "nxp,pca9506";
+				reg = <0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio at 23 {
+				compatible = "nxp,pca9506";
+				reg = <0x23>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
 		};
 
 		imux35: i2c at 1 {
@@ -1188,34 +1216,6 @@ ipmb at 10 {
 		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
 		i2c-protocol;
 	};
-
-	gpio at 20 {
-		compatible = "nxp,pca9506";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpio at 21 {
-		compatible = "nxp,pca9506";
-		reg = <0x21>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpio at 22 {
-		compatible = "nxp,pca9506";
-		reg = <0x22>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpio at 23 {
-		compatible = "nxp,pca9506";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
 };
 
 &i2c14 {
@@ -1470,7 +1470,6 @@ adc at 35 {
 
 &i2c15 {
 	status = "okay";
-	mctp-controller;
 	multi-master;
 	bus-frequency = <400000>;
 	i2c-clk-high-min-percent = <40>;
@@ -1680,7 +1679,7 @@ &pinctrl_gpio3_unbiased &pinctrl_gpio4_unbiased
 			"FM_BMC_READY_R2","RST_SMB_NIC0_R_N","","",
 	/*O0-O7*/       "AC_ON_OFF_BTN_CPLD_SLOT8_N","RST_SMB_NIC1_R_N",
 			"RST_SMB_NIC2_R_N","RST_SMB_NIC3_R_N",
-			"","","","",
+			"","","","FM_BMC_SLED_CYCLE_R",
 	/*P0-P7*/       "ALT_SMB_BMC_CPLD1_N","BTN_BMC_R2_N",
 			"EN_P3V_BAT_SCALED_R","PWRGD_P5V_USB_BMC",
 			"FM_BMC_RTCRST_R","RST_USB_HUB_R_N",
-- 
2.25.1



More information about the Linux-aspeed mailing list