[PATCH v1 08/10] arm64: dts: aspeed: Add initial AST27XX device tree
Kevin Chen
kevin_chen at aspeedtech.com
Fri Aug 16 14:07:34 AEST 2024
Hi Krzk,
> > ---
> > arch/arm64/boot/dts/Makefile | 1 +
> > arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi | 217
> > ++++++++++++++++++++++
> > 2 files changed, 218 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi
> >
> > diff --git a/arch/arm64/boot/dts/Makefile
> > b/arch/arm64/boot/dts/Makefile index 21cd3a87f385..c909c19dc5dd
> 100644
> > --- a/arch/arm64/boot/dts/Makefile
> > +++ b/arch/arm64/boot/dts/Makefile
> > @@ -34,3 +34,4 @@ subdir-y += tesla
> > subdir-y += ti
> > subdir-y += toshiba
> > subdir-y += xilinx
> > +subdir-y += aspeed
> > diff --git a/arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi
> > b/arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi
> > new file mode 100644
> > index 000000000000..858ab95251e4
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi
> > @@ -0,0 +1,217 @@
> > +// SPDX-License-Identifier: GPL-2.0-or-later #include
> > +<dt-bindings/clock/aspeed,ast2700-clk.h>
> > +#include <dt-bindings/reset/aspeed,ast2700-reset.h>
> > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> > +#include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
> > +
> > +/ {
> > + model = "Aspeed BMC";
>
> Model of what? No, drop.
Can I change to "model = "AST2700 EVB""
>
> > + compatible = "aspeed,ast2700";
>
> Please run scripts/checkpatch.pl and fix reported warnings. Then please run
> `scripts/checkpatch.pl --strict` and (probably) fix more warnings.
> Some warnings can be ignored, especially from --strict run, but the code here
> looks like it needs a fix. Feel free to get in touch if the warning is not clear.
>
>
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + interrupt-parent = <&gic>;
> > +
> > + aliases {
> > + serial12 = &uart12;
>
> Nope. Such aliases are board specific.
Agree, I will move to ast2700-evb.dts.
>
> > + };
> > +
> > + cpus {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + cpu at 0 {
> > + compatible = "arm,cortex-a35";
> > + enable-method = "psci";
> > + device_type = "cpu";
> > + reg = <0>;
> > + d-cache-size = <0x8000>;
> > + d-cache-line-size = <64>;
> > + d-cache-sets = <128>;
> > + i-cache-size = <0x8000>;
> > + i-cache-line-size = <64>;
> > + i-cache-sets = <256>;
> > + next-level-cache = <&l2>;
> > + };
> > +
> > + cpu at 1 {
> > + compatible = "arm,cortex-a35";
> > + enable-method = "psci";
> > + device_type = "cpu";
> > + reg = <1>;
> > + d-cache-size = <0x8000>;
> > + d-cache-line-size = <64>;
> > + d-cache-sets = <128>;
> > + i-cache-size = <0x8000>;
> > + i-cache-line-size = <64>;
> > + i-cache-sets = <256>;
> > + next-level-cache = <&l2>;
> > + };
> > +
> > + cpu at 2 {
> > + compatible = "arm,cortex-a35";
> > + enable-method = "psci";
> > + device_type = "cpu";
> > + reg = <2>;
> > + d-cache-size = <0x8000>;
> > + d-cache-line-size = <64>;
> > + d-cache-sets = <128>;
> > + i-cache-size = <0x8000>;
> > + i-cache-line-size = <64>;
> > + i-cache-sets = <256>;
> > + next-level-cache = <&l2>;
> > + };
> > +
> > + cpu at 3 {
> > + compatible = "arm,cortex-a35";
> > + enable-method = "psci";
> > + device_type = "cpu";
> > + reg = <3>;
> > + d-cache-size = <0x8000>;
> > + d-cache-line-size = <64>;
> > + d-cache-sets = <128>;
> > + i-cache-size = <0x8000>;
> > + i-cache-line-size = <64>;
> > + i-cache-sets = <256>;
> > + next-level-cache = <&l2>;
> > + };
> > +
> > + l2: l2-cache0 {
> > + compatible = "cache";
> > + cache-size = <0x80000>;
> > + cache-line-size = <64>;
> > + cache-sets = <1024>;
> > + cache-level = <2>;
> > + };
> > + };
> > +
> > + pmu {
> > + compatible = "arm,cortex-a35-pmu";
> > + interrupt-parent = <&gic>;
> > + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(2) |
> IRQ_TYPE_LEVEL_HIGH)>;
> > + };
> > +
> > + psci {
>
> Order the nodes according to DTS coding style.
>
> Fix all your patches:
> 1. To pass flawlessly checkpatch (you did not run it) 2. To pass
> dt_binding_check and dtbs_check (you did not run these) 3. To adhere to
> kernel coding style 4. To adhere to DTS coding style
Agree.
>
> > + compatible = "arm,psci-1.0";
> > + method = "smc";
> > + };
> > +
> > + gic: interrupt-controller at 12200000 {
>
> Nope, this cannot be outside of SoC.
Agree.
>
> > + compatible = "arm,gic-v3";
> > + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
> IRQ_TYPE_LEVEL_HIGH)>;
> > + #interrupt-cells = <3>;
> > + interrupt-controller;
> > + interrupt-parent = <&gic>;
> > + #redistributor-regions = <1>;
> > + reg = <0 0x12200000 0 0x10000>, //GICD
> > + <0 0x12280000 0 0x80000>, //GICR
> > + <0 0x40440000 0 0x1000>; //GICC
>
> Read DTS coding style and order this correctly.
Agree.
>
> > + };
> > +
> > + timer {
> > + compatible = "arm,armv8-timer";
> > + interrupt-parent = <&gic>;
> > + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
> IRQ_TYPE_LEVEL_LOW)>,
> > + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
> IRQ_TYPE_LEVEL_LOW)>,
> > + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
> IRQ_TYPE_LEVEL_LOW)>,
> > + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
> IRQ_TYPE_LEVEL_LOW)>;
> > + arm,cpu-registers-not-fw-configured;
> > + always-on;
> > + };
> > +
> > + soc0: soc at 10000000 {
> > + compatible = "simple-bus";
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + ranges;
> > +
> > + soc0_sram: sram at 10000000 {
> > + compatible = "mmio-sram";
> > + reg = <0x0 0x10000000 0x0 0x20000>; /* 128KiB SRAM on soc0
> */
> > + ranges = <0x0 0x0 0x0 0x10000000 0x0 0x20000>;
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + no-memory-wc;
> > +
> > + exported at 0 {
> > + reg = <0 0x0 0 0x20000>;
> > + export;
> > + };
> > + };
> > +
> > + syscon0: syscon at 12c02000 {
> > + compatible = "aspeed,ast2700-scu0", "syscon", "simple-mfd";
> > + reg = <0x0 0x12c02000 0x0 0x1000>;
> > + ranges = <0x0 0x0 0 0x12c02000 0 0x1000>;
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + #clock-cells = <1>;
> > + #reset-cells = <1>;
> > +
> > + silicon-id at 0 {
> > + compatible = "aspeed,ast2700-silicon-id",
> "aspeed,silicon-id";
> > + reg = <0 0x0 0 0x4>;
> > + };
> > +
> > + scu_ic0: interrupt-controller at 1D0 {
>
> DTS coding style...
Agree. I will fix to "scu_ic0: interrupt-controller at 1d0 {"
>
> > + #interrupt-cells = <1>;
> > + compatible = "aspeed,ast2700-scu-ic0";
> > + reg = <0 0x1d0 0 0xc>;
> > + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupt-controller;
> > + };
> > +
> > + scu_ic1: interrupt-controller at 1E0 {
> > + #interrupt-cells = <1>;
> > + compatible = "aspeed,ast2700-scu-ic1";
> > + reg = <0 0x1e0 0 0xc>;
> > + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupt-controller;
> > + };
> > +
> > + soc0_rst: reset-controller at 200 {
> > + reg = <0 0x200 0 0x40>;
> > + };
> > +
> > + soc0_clk: clock-controller at 240 {
> > + reg = <0 0x240 0 0x1c0>;
> > + };
> > + };
> > +
> > + };
> > +
> > + soc1: soc at 14000000 {
>
> Wait, what, to socs?
Yes.
In AST2700, there are two socs with different base address for use.
>
> > + compatible = "simple-bus";
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + ranges;
> > +
> > + syscon1: syscon at 14c02000 {
> > + compatible = "aspeed,ast2700-scu1", "syscon", "simple-mfd";
> > + reg = <0x0 0x14c02000 0x0 0x1000>;
> > + ranges = <0x0 0x0 0x0 0x14c02000 0x0 0x1000>;
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + #clock-cells = <1>;
> > + #reset-cells = <1>;
> > +
> > + soc1_rst: reset-controller at 200 {
> > + #reset-cells = <1>;
> > + };
> > +
> > + soc1_clk: clock-controller at 240 {
> > + reg = <0 0x240 0 0x1c0>;
> > + };
> > + };
> > +
> > + uart12: serial at 14c33b00 {
> > + compatible = "ns16550a";
> > + reg = <0x0 0x14c33b00 0x0 0x100>;
> > + reg-shift = <2>;
> > + reg-io-width = <4>;
> > + clocks = <&syscon1 SCU1_CLK_GATE_UART12CLK>;
> > + no-loopback-test;
> > + pinctrl-names = "default";
>
> What is this?
BMC UART is used in uart12 in soc1.
>
> > + };
> > + };
> > +};
> > +
>
> Best regards,
> Krzysztof
--
Best Regards,
Kevin.Chen
************* Email Confidentiality Notice ********************
免責聲明:
本信件(或其附件)可能包含機密資訊，並受法律保護。如 台端非指定之收件者，請以電子郵件通知本電子郵件之發送者, 並請立即刪除本電子郵件及其附件和銷毀所有複印件。謝謝您的合作!
DISCLAIMER:
This message (and any attachments) may contain legally privileged and/or other confidential information. If you have received it in error, please notify the sender by reply e-mail and immediately delete the e-mail and any attachments without copying or disclosing the contents. Thank you.
More information about the Linux-aspeed
mailing list