[PATCH v2 4/9] clk: ast2700: add clock controller
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Sat Aug 3 05:33:30 AEST 2024
On Fri, 2 Aug 2024 at 12:05, Kevin Chen <kevin_chen at aspeedtech.com> wrote:
>
> Add support for ast2700 clock controller.
>
> Signed-off-by: Kevin Chen <kevin_chen at aspeedtech.com>
> ---
> drivers/clk/Makefile | 1 +
> drivers/clk/clk-ast2700.c | 1173 +++++++++++++++++++++++++++++++++++++
> 2 files changed, 1174 insertions(+)
> create mode 100644 drivers/clk/clk-ast2700.c
>
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> index f793a16cad40..0d5992ea0fa4 100644
> --- a/drivers/clk/Makefile
> +++ b/drivers/clk/Makefile
> @@ -38,6 +38,7 @@ obj-$(CONFIG_COMMON_CLK_FSL_SAI) += clk-fsl-sai.o
> obj-$(CONFIG_COMMON_CLK_GEMINI) += clk-gemini.o
> obj-$(CONFIG_COMMON_CLK_ASPEED) += clk-aspeed.o
> obj-$(CONFIG_MACH_ASPEED_G6) += clk-ast2600.o
> +obj-$(CONFIG_MACH_ASPEED_G7) += clk-ast2700.o
> obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o
> obj-$(CONFIG_CLK_HSDK) += clk-hsdk-pll.o
> obj-$(CONFIG_COMMON_CLK_K210) += clk-k210.o
> diff --git a/drivers/clk/clk-ast2700.c b/drivers/clk/clk-ast2700.c
> new file mode 100644
> index 000000000000..eec8e0cb83d9
> --- /dev/null
> +++ b/drivers/clk/clk-ast2700.c
> @@ -0,0 +1,1173 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +// Copyright ASPEED Technology
> +
> +#include <linux/clk-provider.h>
> +#include <linux/of_address.h>
> +#include <linux/of_device.h>
> +#include <linux/reset-controller.h>
> +
> +#include <dt-bindings/clock/aspeed,ast2700-clk.h>
> +#include <dt-bindings/reset/aspeed,ast2700-reset.h>
> +
> +#define SCU_CLK_24MHZ 24000000
Are Aspeed's 24 MHz somehow different from 24 MHz on other platforms?
Please use <linux/units.h> and refrain from defining just random
values. If it has some special meaning (like XO clock or some other
fixed funcion), please use logical names.
> +#define SCU_CLK_25MHZ 25000000
> +#define SCU_CLK_192MHZ 192000000
> +/* SOC0 USB2 PHY CLK*/
> +#define SCU_CLK_12MHZ 12000000
So, this can be #define ASPEED_SOC0_USB2_PHY_RATE (12 * HZ_PER_MHZ)
> +/* SOC0 */
> +#define SCU0_HWSTRAP1 0x010
> +#define SCU0_CLK_STOP 0x240
> +#define SCU0_CLK_SEL1 0x280
> +#define SCU0_CLK_SEL2 0x284
> +#define GET_USB_REFCLK_DIV(x) ((GENMASK(23, 20) & (x)) >> 20)
> +#define UART_DIV13_EN BIT(30)
> +#define SCU0_HPLL_PARAM 0x300
> +#define SCU0_DPLL_PARAM 0x308
> +#define SCU0_MPLL_PARAM 0x310
> +#define SCU0_D1CLK_PARAM 0x320
> +#define SCU0_D2CLK_PARAM 0x330
> +#define SCU0_CRT1CLK_PARAM 0x340
> +#define SCU0_CRT2CLK_PARAM 0x350
> +#define SCU0_MPHYCLK_PARAM 0x360
> +
> +/* SOC1 */
> +#define SCU1_CLK_STOP 0x240
> +#define SCU1_CLK_STOP2 0x260
> +#define SCU1_CLK_SEL1 0x280
> +#define SCU1_CLK_SEL2 0x284
> +#define UXCLK_MASK GENMASK(1, 0)
> +#define HUXCLK_MASK GENMASK(4, 3)
> +#define SCU1_HPLL_PARAM 0x300
> +#define SCU1_APLL_PARAM 0x310
> +#define SCU1_DPLL_PARAM 0x320
> +#define SCU1_UXCLK_CTRL 0x330
> +#define SCU1_HUXCLK_CTRL 0x334
> +#define SCU1_MAC12_CLK_DLY 0x390
> +#define SCU1_MAC12_CLK_DLY_100M 0x394
> +#define SCU1_MAC12_CLK_DLY_10M 0x398
> +
> +/*
> + * MAC Clock Delay settings
> + */
> +#define MAC_CLK_RMII1_50M_RCLK_O_CTRL BIT(30)
> +#define MAC_CLK_RMII1_50M_RCLK_O_DIS 0
> +#define MAC_CLK_RMII1_50M_RCLK_O_EN 1
> +#define MAC_CLK_RMII0_50M_RCLK_O_CTRL BIT(29)
> +#define MAC_CLK_RMII0_5M_RCLK_O_DIS 0
> +#define MAC_CLK_RMII0_5M_RCLK_O_EN 1
> +#define MAC_CLK_RMII_TXD_FALLING_2 BIT(27)
> +#define MAC_CLK_RMII_TXD_FALLING_1 BIT(26)
> +#define MAC_CLK_RXCLK_INV_2 BIT(25)
> +#define MAC_CLK_RXCLK_INV_1 BIT(24)
> +#define MAC_CLK_1G_INPUT_DELAY_2 GENMASK(23, 18)
> +#define MAC_CLK_1G_INPUT_DELAY_1 GENMASK(17, 12)
> +#define MAC_CLK_1G_OUTPUT_DELAY_2 GENMASK(11, 6)
> +#define MAC_CLK_1G_OUTPUT_DELAY_1 GENMASK(5, 0)
> +
> +#define MAC_CLK_100M_10M_RESERVED GENMASK(31, 26)
> +#define MAC_CLK_100M_10M_RXCLK_INV_2 BIT(25)
> +#define MAC_CLK_100M_10M_RXCLK_INV_1 BIT(24)
> +#define MAC_CLK_100M_10M_INPUT_DELAY_2 GENMASK(23, 18)
> +#define MAC_CLK_100M_10M_INPUT_DELAY_1 GENMASK(17, 12)
> +#define MAC_CLK_100M_10M_OUTPUT_DELAY_2 GENMASK(11, 6)
> +#define MAC_CLK_100M_10M_OUTPUT_DELAY_1 GENMASK(5, 0)
> +
> +#define AST2700_DEF_MAC12_DELAY_1G 0x00CF4D75
lowcase hex, please.
> +#define AST2700_DEF_MAC12_DELAY_100M 0x00410410
> +#define AST2700_DEF_MAC12_DELAY_10M 0x00410410
> +
> +struct mac_delay_config {
> + u32 tx_delay_1000;
> + u32 rx_delay_1000;
> + u32 tx_delay_100;
> + u32 rx_delay_100;
> + u32 tx_delay_10;
> + u32 rx_delay_10;
> +};
> +
> +/* Globally visible clocks */
> +static DEFINE_SPINLOCK(ast2700_clk_lock);
> +
> +/* Division of RGMII Clock */
> +static const struct clk_div_table ast2700_rgmii_div_table[] = {
> + { 0x0, 4 },
> + { 0x1, 4 },
> + { 0x2, 6 },
> + { 0x3, 8 },
> + { 0x4, 10 },
> + { 0x5, 12 },
> + { 0x6, 14 },
> + { 0x7, 16 },
> + { 0 }
> +};
> +
> +/* Division of RMII Clock */
> +static const struct clk_div_table ast2700_rmii_div_table[] = {
> + { 0x0, 8 },
> + { 0x1, 8 },
> + { 0x2, 12 },
> + { 0x3, 16 },
> + { 0x4, 20 },
> + { 0x5, 24 },
> + { 0x6, 28 },
> + { 0x7, 32 },
> + { 0 }
> +};
> +
> +/* Division of HCLK/SDIO/MAC/apll_divn CLK */
> +static const struct clk_div_table ast2700_clk_div_table[] = {
> + { 0x0, 2 },
> + { 0x1, 2 },
> + { 0x2, 3 },
> + { 0x3, 4 },
> + { 0x4, 5 },
> + { 0x5, 6 },
> + { 0x6, 7 },
> + { 0x7, 8 },
> + { 0 }
> +};
> +
> +/* Division of PCLK/EMMC CLK */
> +static const struct clk_div_table ast2700_clk_div_table2[] = {
> + { 0x0, 2 },
> + { 0x1, 4 },
> + { 0x2, 6 },
> + { 0x3, 8 },
> + { 0x4, 10 },
> + { 0x5, 12 },
> + { 0x6, 14 },
> + { 0x7, 16 },
> + { 0 }
> +};
> +
> +/* HPLL/DPLL: 2000Mhz(default) */
> +static struct clk_hw *ast2700_soc0_hw_pll(const char *name, const char *parent_name, u32 val)
Please migrate from using parent_names to either using parent_hw or
using fwname to specify the parent clock.
> +{
> + unsigned int mult, div;
> +
> + if (val & BIT(24)) {
> + /* Pass through mode */
> + mult = 1;
> + div = 1;
> + } else {
> + /* F = CLKIN(25MHz) * [(M+1) / 2(N+1)] / (P+1) */
> + u32 m = val & 0x1fff;
> + u32 n = (val >> 13) & 0x3f;
> + u32 p = (val >> 19) & 0xf;
> +
> + mult = (m + 1) / (2 * (n + 1));
> + div = (p + 1);
> + }
> +
> + return clk_hw_register_fixed_factor(NULL, name, parent_name, 0, mult, div);
> +};
> +
> +/* MPLL 1600Mhz(default) */
> +static struct clk_hw *ast2700_calc_mpll(const char *name, const char *parent_name, u32 val)
> +{
> + unsigned int mult, div;
> +
> + if (val & BIT(24)) {
> + /* Pass through mode */
> + div = 1;
> + mult = div;
> + } else {
> + /* F = CLKIN(25MHz) * [CLKF/(CLKR+1)] /(CLKOD+1) */
> + u32 m = val & 0x1fff;
> + u32 n = (val >> 13) & 0x3f;
> + u32 p = (val >> 19) & 0xf;
> +
> + mult = m / (n + 1);
> + div = (p + 1);
> + }
> + return clk_hw_register_fixed_factor(NULL, name, parent_name, 0, mult, div);
> +};
> +
> +static struct clk_hw *ast2700_calc_uclk(const char *name, u32 val)
> +{
> + unsigned int mult, div;
> +
> + /* UARTCLK = UXCLK * R / (N * 2) */
> + u32 r = val & 0xff;
> + u32 n = (val >> 8) & 0x3ff;
> +
> + mult = r;
> + div = n * 2;
> +
> + return clk_hw_register_fixed_factor(NULL, name, "uxclk", 0, mult, div);
> +};
> +
> +static struct clk_hw *ast2700_calc_huclk(const char *name, u32 val)
> +{
> + unsigned int mult, div;
> +
> + /* UARTCLK = UXCLK * R / (N * 2) */
> + u32 r = val & 0xff;
> + u32 n = (val >> 8) & 0x3ff;
> +
> + mult = r;
> + div = n * 2;
> +
> + return clk_hw_register_fixed_factor(NULL, name, "huxclk", 0, mult, div);
> +};
> +
> +static struct clk_hw *ast2700_calc_soc1_pll(const char *name, const char *parent_name, u32 val)
How is this different from ast2700_soc0_hw_pll() ?
> +{
> + unsigned int mult, div;
> +
> + if (val & BIT(24)) {
> + /* Pass through mode */
> + div = 1;
> + mult = div;
> + } else {
> + /* F = 25Mhz * [(M + 1) / (n + 1)] / (p + 1) */
> + u32 m = val & 0x1fff;
> + u32 n = (val >> 13) & 0x3f;
> + u32 p = (val >> 19) & 0xf;
> +
> + mult = (m + 1) / (n + 1);
> + div = (p + 1);
> + }
> + return clk_hw_register_fixed_factor(NULL, name, parent_name, 0, mult, div);
> +};
> +
--
With best wishes
Dmitry
More information about the Linux-aspeed
mailing list