[PATCH v12 20/28] ARM: dts: aspeed: yosemite4: support medusa board adc sensors

[Delphine CC Chiu]

Add ina233/ina28 support for medusa board adc sensors

Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu at wiwynn.com>
---
 .../dts/aspeed/aspeed-bmc-facebook-yosemite4.dts    | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index 98eeee49b082..49500db53a13 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -915,6 +915,19 @@ power-sensor at 40 {
 		reg = <0x40>;
 	};
 
+	power-sensor at 41 {
+			compatible = "ti,ina233";
+			resistor-calibration = /bits/ 16 <0x0a00>;
+			current-lsb= /bits/ 16 <0x0001>;
+			reg = <0x41>;
+	};
+
+	power-sensor at 44 {
+			compatible = "ti,ina238";
+			shunt-resistor = <1000>;
+			reg = <0x44>;
+	};
+
 	temperature-sensor at 48 {
 		compatible = "ti,tmp75";
 		reg = <0x48>;
-- 
2.25.1