[PATCH 3/4] dt-bindings: clock: Add AST2700 clock bindings

Tue Aug 13 11:53:06 AEST 2024

> Subject: Re: [PATCH 3/4] dt-bindings: clock: Add AST2700 clock bindings
> 
> On 12/08/2024 11:39, Ryan Chen wrote:
> >> Subject: RE: [PATCH 3/4] dt-bindings: clock: Add AST2700 clock
> >> bindings
> >>
> >>> Subject: Re: [PATCH 3/4] dt-bindings: clock: Add AST2700 clock
> >>> bindings
> >>>
> >>> On 12/08/2024 10:22, Ryan Chen wrote:
> >>>>> Subject: Re: [PATCH 3/4] dt-bindings: clock: Add AST2700 clock
> >>>>> bindings
> >>>>>
> >>>>> On 12/08/2024 09:26, Ryan Chen wrote:
> >>>>>>> Subject: RE: [PATCH 3/4] dt-bindings: clock: Add AST2700 clock
> >>>>>>> bindings
> >>>>>>>
> >>>>>>>> Subject: Re: [PATCH 3/4] dt-bindings: clock: Add AST2700 clock
> >>>>>>>> bindings
> >>>>>>>>
> >>>>>>>> On 09/08/2024 07:47, Ryan Chen wrote:
> >>>>>>>>>> Subject: Re: [PATCH 3/4] dt-bindings: clock: Add AST2700
> >>>>>>>>>> clock bindings
> >>>>>>>>>>
> >>>>>>>>>> Le 08/08/2024 à 09:59, Ryan Chen a écrit :
> >>>>>>>>>>> Add dt bindings for AST2700 clock controller
> >>>>>>>>>>>
> >>>>>>>>>>> Signed-off-by: Ryan Chen <ryan_chen at aspeedtech.com>
> >>>>>>>>>>> ---
> >>>>>>>>>>>   .../dt-bindings/clock/aspeed,ast2700-clk.h    | 175
> >>>>>>>>>> ++++++++++++++++++
> >>>>>>>>>>>   1 file changed, 175 insertions(+)
> >>>>>>>>>>>   create mode 100644
> >>>>>>>>>>> include/dt-bindings/clock/aspeed,ast2700-clk.h
> >>>>>>>>>>>
> >>>>>>>>>>> diff --git a/include/dt-bindings/clock/aspeed,ast2700-clk.h
> >>>>>>>>>>> b/include/dt-bindings/clock/aspeed,ast2700-clk.h
> >>>>>>>>>>> new file mode 100644
> >>>>>>>>>>> index 000000000000..facf72352c3e
> >>>>>>>>>>> --- /dev/null
> >>>>>>>>>>> +++ b/include/dt-bindings/clock/aspeed,ast2700-clk.h
> >>>>>>>>>>> @@ -0,0 +1,175 @@
> >>>>>>>>>>> +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> >>>>>>>>>>> +*/
> >>>>>>>>>>> +/*
> >>>>>>>>>>> + * Device Tree binding constants for AST2700 clock controller.
> >>>>>>>>>>> + *
> >>>>>>>>>>> + * Copyright (c) 2024 Aspeed Technology Inc.
> >>>>>>>>>>> + */
> >>>>>>>>>>> +
> >>>>>>>>>>> +#ifndef __DT_BINDINGS_CLOCK_AST2700_H #define
> >>>>>>>>>>> +__DT_BINDINGS_CLOCK_AST2700_H
> >>>>>>>>>>> +
> >>>>>>>>>>> +/* SOC0 clk-gate */
> >>>>>>>>>>> +#define SCU0_CLK_GATE_MCLK (0) #define
> >>> SCU0_CLK_GATE_ECLK (1)
> >>>>>>>>>>> +#define SCU0_CLK_GATE_2DCLK        (2)
> >>>>>>>>>>> +#define SCU0_CLK_GATE_VCLK (3) #define
> >> SCU0_CLK_GATE_BCLK
> >>> (4)
> >>>>>>>>>>> +#define SCU0_CLK_GATE_VGA0CLK      (5)
> >>>>>>>>>>> +#define SCU0_CLK_GATE_REFCLK       (6)
> >>>>>>>>>>> +#define SCU0_CLK_GATE_PORTBUSB2CLK (7) #define
> >>>>>>>> SCU0_CLK_GATE_RSV8
> >>>>>>>>>>> +(8)
> >>>>>>>>>>> +#define SCU0_CLK_GATE_UHCICLK      (9)
> >>>>>>>>>>> +#define SCU0_CLK_GATE_VGA1CLK      (10)
> >>>>>>>>>>> +#define SCU0_CLK_GATE_DDRPHYCLK    (11)
> >>>>>>>>>>> +#define SCU0_CLK_GATE_E2M0CLK      (12)
> >>>>>>>>>>> +#define SCU0_CLK_GATE_HACCLK       (13)
> >>>>>>>>>>> +#define SCU0_CLK_GATE_PORTAUSB2CLK (14)
> >>>>>>>>>>> +#define SCU0_CLK_GATE_UART4CLK     (15)
> >>>>>>>>>>> +#define SCU0_CLK_GATE_SLICLK       (16)
> >>>>>>>>>>> +#define SCU0_CLK_GATE_DACCLK       (17)
> >>>>>>>>>>> +#define SCU0_CLK_GATE_DP   (18)
> >>>>>>>>>>> +#define SCU0_CLK_GATE_E2M1CLK      (19)
> >>>>>>>>>>> +#define SCU0_CLK_GATE_CRT0CLK      (20)
> >>>>>>>>>>> +#define SCU0_CLK_GATE_CRT1CLK      (21)
> >>>>>>>>>>> +#define SCU0_CLK_GATE_VLCLK        (22)
> >>>>>>>>>>> +#define SCU0_CLK_GATE_ECDSACLK     (23)
> >>>>>>>>>>> +#define SCU0_CLK_GATE_RSACLK       (24)
> >>>>>>>>>>> +#define SCU0_CLK_GATE_RVAS0CLK     (25)
> >>>>>>>>>>> +#define SCU0_CLK_GATE_UFSCLK       (26)
> >>>>>>>>>>> +#define SCU0_CLK_GATE_EMMCCLK      (27)
> >>>>>>>>>>> +#define SCU0_CLK_GATE_RVAS1CLK     (28)
> >>>>>>>>>>> +/* reserved 29 ~ 31*/
> >>>>>>>>
> >>>>>>>> No, you cannot reserve IDs. They are always continous.
> >>>>>>> I think for mis-understood.
> >>>>>>> I will remove the comment.
> >>>>>>> And keep it is continuous. Thanks.
> >>>>>>>>
> >>>>>>>>>>> +#define SCU0_CLK_GATE_NUM
> (SCU0_CLK_GATE_RVAS1CLK +
> >>> 1)
> >>>>>>>>
> >>>>>>>> No, not a binding.
> >>>>>>>
> >>>>>> I will modify by following.
> >>>>>>
> >>>>>> #define SCU0_CLK_GATE_RVAS1CLK  (28)
> >>>>>> #define SCU0_CLK_GATE_NUM       (SCU0_CLK_GATE_RVAS1CLK
> +
> >> 1)
> >>>>>
> >>>>> Nothing changed. Still not a binding. Why do you send the same and
> >>>>> expect different result? Drop.
> >>>>>
> >>>>> Address feedback sent to you from previous versions of the patchset.
> >>>>> There was never a reply.
> >>>> Sorry, mis-understood.
> >>>> Since you think "#define SCU0_CLK_GATE_NUM" not a binding.
> >>>> Do you mean I should #define SCU0_CLK_GATE_NUM in clk driver, not
> >>>> in
> >>> binding header, am I right?
> >>>
> >>> What did I write in the first Aspeed 2700 patch? So you are not
> >>> going to respond there? Are you going to implement entire feedback
> >>> received in the first version of the patchset?
> >>
> >> Apologize again, I do the internal discussion, it should not send
> >> "Introduce ASPEED AST27XX BMC SoC" series patch. it should be separate
> series patch.
> >> It should be bite by bite, example clk driver patches, platform
> >> patches, interrupt patches.
> >> So I am not going to response there, prefer here.
> >>
> >> So I still not understood your point "not a binding" is ~
> >>
> >>
> > I review your point on
> > https://patchwork.kernel.org/project/linux-clk/patch/20240726110355.21
> > 81563-3-kevin_chen at aspeedtech.com/
> >
> > Do you mean I should not be gate naming here, all should be clk.
> > Example +#define SCU0_CLK_GATE_RVAS1CLK -> +#define
> SCU0_CLK_RVAS1 am I right?
> 
> Drop the define for number of clocks from the header, because it is not a
> binding. You can put it in the driver or not, I don't care and do not provide
> guidance on this because I don't know if it makes sense at all.
> What I know is that number of clocks is not related to binding. It is not needed
> in the binding, either.

Sorry, I am confused.
if you think that number of clocks is not related to binding.
How dtsi claim for clk?
For example in dtsi.
include <dt-bindings/clock/aspeed,ast2700-clk.h>
usb3bhp: usb3bhp {
....
clocks = <&syscon0 SCU0_CLK_GATE_PORTAUSB>;
...
}

It need for dtsi binding include for clock enable. 

If there is no binding clock include file, how device know the clock index?
> 
> Best regards,
> Krzysztof