[PATCH v8 1/3] dt-bindings: hwmon: fan: Add fan binding to schema

[Rob Herring]

On Wed, Aug 30, 2023 at 08:32:00PM +0800, Billy Tsai wrote:
> From: Naresh Solanki <naresh.solanki at 9elements.com>
> 
> Add common fan properties bindings to a schema.
> 
> Bindings for fan controllers can reference the common schema for the
> fan
> 
> child nodes:
> 
>   patternProperties:
>     "^fan@[0-2]":
>       type: object
>       $ref: fan-common.yaml#

        unevaluatedProperties: false


> 
> Signed-off-by: Naresh Solanki <naresh.solanki at 9elements.com>
> Signed-off-by: Billy Tsai <billy_tsai at aspeedtech.com>
> ---
>  .../devicetree/bindings/hwmon/fan-common.yaml | 63 +++++++++++++++++++
>  1 file changed, 63 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/hwmon/fan-common.yaml
> 
> diff --git a/Documentation/devicetree/bindings/hwmon/fan-common.yaml b/Documentation/devicetree/bindings/hwmon/fan-common.yaml
> new file mode 100644
> index 000000000000..a69b4d553e45
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/fan-common.yaml
> @@ -0,0 +1,63 @@
> +# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause

Drop 'or-later'. It's GPL2 only.

> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/hwmon/fan-common.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Common Fan Properties
> +
> +maintainers:
> +  - Naresh Solanki <naresh.solanki at 9elements.com>
> +  - Billy Tsai <billy_tsai at aspeedtech.com>
> +
> +properties:
> +  max-rpm:
> +    description:
> +      Max RPM supported by fan.
> +    $ref: /schemas/types.yaml#/definitions/uint32

Physics will limit this to something much less than 2^32. Add some 
constraints. 10000?

> +
> +  min-rpm:
> +    description:
> +      Min RPM supported by fan.
> +    $ref: /schemas/types.yaml#/definitions/uint32

ditto

> +
> +  pulses-per-revolution:
> +    description:
> +      The number of pulse from fan sensor per revolution.
> +    $ref: /schemas/types.yaml#/definitions/uint32

Needs constraints. I assume this is never more than 4 (or 2 even)?

> +  div:

Too generic of a name.

> +    description:
> +      Fan clock divisor

But what is a fan clock?

> +    $ref: /schemas/types.yaml#/definitions/uint32
> +
> +  target-rpm:
> +    description:
> +      Target RPM the fan should be configured during driver probe.

What driver? By the time the OS driver runs, a bunch of other boot 
software has already run on modern systems. So this value would likely 
be used much earlier. The point is that when exactly is outside the 
scope of DT. This is "what RPM do I use in case of no other information 
(e.g. temperature)".

> +    $ref: /schemas/types.yaml#/definitions/uint32
> +
> +  mode:

Too generic.

> +    description:
> +      Select the operational mode of the fan.

What are modes? Spin and don't spin?

> +    $ref: /schemas/types.yaml#/definitions/uint32
> +
> +  pwms:
> +    description:
> +      PWM provider.

maxItems: 1

I don't think there are fans with more than 1 PWM input?

> +
> +  tach-ch:
> +    description:
> +      The tach channel used for the fan.
> +    $ref: /schemas/types.yaml#/definitions/uint32

The existing ASpeed version of this property allows more than 1 entry. I 
don't understand how a fan would have 2 tach signals, but if so, the 
generic property should allow for that.

Perhaps 'reg' should be defined in here with some text saying 'reg' 
corresponds to the fan controller specific id which may be the PWM+TACH 
channel, PWM channel (deprecated), or TACH channel. I think there are 
examples of all 3 of these cases.

> +
> +  label:
> +    description:
> +      Optional fan label
> +
> +  fan-supply:
> +    description:
> +      Power supply for fan.
> +
> +additionalProperties: true
> +
> +...
> -- 
> 2.25.1
>