[PATCH v8 3/3] hwmon: (aspeed-g6-pwm-tacho): Support for ASPEED g6 PWM/Fan tach
Potin Lai
potin.lai.pt at gmail.com
Fri Sep 1 14:54:33 AEST 2023
On 8/30/23 20:32, Billy Tsai wrote:
> +static int aspeed_tach_hwmon_write(struct device *dev,
> + enum hwmon_sensor_types type, u32 attr,
> + int channel, long val)
> +{
> + struct aspeed_pwm_tach_data *priv = dev_get_drvdata(dev);
> + u32 reg_val;
> +
> + switch (attr) {
> + case hwmon_fan_div:
> + if (!is_power_of_2(val) || (ilog2(val) % 2) ||
> + DIV_TO_REG(val) > 0xb)
> + return -EINVAL;
> + priv->tach_divisor = val;
> + reg_val = readl(priv->base + TACH_ASPEED_CTRL(channel));
> + reg_val &= ~TACH_ASPEED_CLK_DIV_T_MASK;
> + reg_val |= FIELD_GET(TACH_ASPEED_CLK_DIV_T_MASK,
> + DIV_TO_REG(priv->tach_divisor));
Hi Billy,
I notice the fanX_div is always shows 1 after I set 1024.
I think FIELD_GET() needs to replaced with FIELD_PREP().
> + writel(reg_val, priv->base + TACH_ASPEED_CTRL(channel));
> + break;
> + default:
> + return -EOPNOTSUPP;
> + }
> +
> + return 0;
> +}
> +static void aspeed_present_fan_tach(struct aspeed_pwm_tach_data *priv, u32 tach_ch)
> +{
> + u32 val;
> +
> + priv->tach_present[tach_ch] = true;
> + priv->tach_divisor = DEFAULT_TACH_DIV;
> +
> + val = readl(priv->base + TACH_ASPEED_CTRL(tach_ch));
> + val &= ~(TACH_ASPEED_INVERS_LIMIT | TACH_ASPEED_DEBOUNCE_MASK |
> + TACH_ASPEED_IO_EDGE_MASK | TACH_ASPEED_CLK_DIV_T_MASK |
> + TACH_ASPEED_THRESHOLD_MASK);
> + val |= (DEBOUNCE_3_CLK << TACH_ASPEED_DEBOUNCE_BIT) | F2F_EDGES |
> + FIELD_GET(TACH_ASPEED_CLK_DIV_T_MASK,
> + DIV_TO_REG(priv->tach_divisor));
And here as well.
> + writel(val, priv->base + TACH_ASPEED_CTRL(tach_ch));
> +
> + aspeed_tach_ch_enable(priv, tach_ch, true);
> +}
> +
>
More information about the Linux-aspeed
mailing list