[PATCH 6/7] ARM: dts: aspeed: mtmitchell: Remove redundant ADC configurations

[Joel Stanley]

On Thu, 5 Oct 2023 at 14:26, Chanh Nguyen <chanh at os.amperecomputing.com> wrote:
>
> Mt.Mitchell DVT and later hardware do not use adc1. It only uses
> adc0 with channels 0, 1 and 2. This commit removes redundant ADC
> configurations.
>
> Signed-off-by: Chanh Nguyen <chanh at os.amperecomputing.com>

Reviewed-by: Joel Stanley <joel at jms.id.au>

> ---
>  .../dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts   | 15 +--------------
>  1 file changed, 1 insertion(+), 14 deletions(-)
>
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
> index c676172f0dbf..eb8d5e367276 100644
> --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
> @@ -564,20 +564,7 @@
>
>         pinctrl-names = "default";
>         pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
> -               &pinctrl_adc2_default &pinctrl_adc3_default
> -               &pinctrl_adc4_default &pinctrl_adc5_default
> -               &pinctrl_adc6_default &pinctrl_adc7_default>;
> -};
> -
> -&adc1 {
> -       ref_voltage = <2500>;
> -       status = "okay";
> -
> -       pinctrl-names = "default";
> -       pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
> -               &pinctrl_adc10_default &pinctrl_adc11_default
> -               &pinctrl_adc12_default &pinctrl_adc13_default
> -               &pinctrl_adc14_default &pinctrl_adc15_default>;
> +               &pinctrl_adc2_default>;
>  };
>
>  &vhub {
> --
> 2.17.1
>