[PATCH 5/7] ARM: dts: aspeed: mtmitchell: Add inlet temperature sensor

[Joel Stanley]

On Thu, 5 Oct 2023 at 14:26, Chanh Nguyen <chanh at os.amperecomputing.com> wrote:
>
> Add the inlet temperature at address 0x48, which is connected
> via BMC I2C8.
>
> Signed-off-by: Chanh Nguyen <chanh at os.amperecomputing.com>

Reviewed-by: Joel Stanley <joel at jms.id.au>

> ---
>  arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts | 5 +++++
>  1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
> index 88693c2b2dbe..c676172f0dbf 100644
> --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
> @@ -510,6 +510,11 @@
>  &i2c8 {
>         status = "okay";
>
> +       temperature-sensor at 48 {
> +               compatible = "ti,tmp112";
> +               reg = <0x48>;
> +       };
> +
>         gpio at 77 {
>                 compatible = "nxp,pca9539";
>                 reg = <0x77>;
> --
> 2.17.1
>