[PATCH 1/7] ARM: dts: aspeed: mtjade, mtmitchell: Update gpio-line-names

[Chanh Nguyen]

Update GPIO line-name to follow naming convention specified at
github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md

Signed-off-by: Chanh Nguyen <chanh at os.amperecomputing.com>
---
 .../dts/aspeed/aspeed-bmc-ampere-mtjade.dts   | 42 +++++++++----------
 .../aspeed/aspeed-bmc-ampere-mtmitchell.dts   |  6 +--
 2 files changed, 24 insertions(+), 24 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts
index 0a51d2e32fab..e57efcc8522a 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts
@@ -760,30 +760,30 @@
 
 &gpio {
 	gpio-line-names =
-	/*A0-A7*/	"","","","S0_BMC_SPECIAL_BOOT","","","","",
-	/*B0-B7*/	"BMC_SELECT_EEPROM","","","",
-			"POWER_BUTTON","","","",
+	/*A0-A7*/	"","","","host0-special-boot","","","","",
+	/*B0-B7*/	"i2c-backup-sel","","","",
+			"power-button","","","",
 	/*C0-C7*/	"","","","","","","","",
 	/*D0-D7*/	"","","","","","","","",
 	/*E0-E7*/	"","","","","","","","",
-	/*F0-F7*/	"","","BMC_SYS_PSON_L","S0_DDR_SAVE","PGOOD",
-			"S1_DDR_SAVE","","",
-	/*G0-G7*/	"host0-ready","SHD_REQ_L","","S0_OVERTEMP_L","","",
+	/*F0-F7*/	"","","power-chassis-control","s0-ddr-save","power-chassis-good",
+			"s1-ddr-save","","",
+	/*G0-G7*/	"host0-ready","host0-shd-req-n","","s0-overtemp-n","","",
 			"","",
-	/*H0-H7*/	"","","","","PSU1_VIN_GOOD","PSU2_VIN_GOOD","","",
-	/*I0-I7*/	"PSU1_PRESENT","PSU2_PRESENT","S1_BMC_SPECIAL_BOOT",
-			"","","","","",
-	/*J0-J7*/	"S0_HIGHTEMP_L","S0_FAULT_L","S0_SCP_AUTH_FAIL_L","",
+	/*H0-H7*/	"","","","","ps0-vin-good","ps1-vin-good","","",
+	/*I0-I7*/	"presence-ps0","presence-ps1","s1-special-boot",
+				"","","","","",
+	/*J0-J7*/	"s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n","",
 			"","","","",
 	/*K0-K7*/	"","","","","","","","",
-	/*L0-L7*/       "","","","BMC_SYSRESET_L","SPI_AUTH_FAIL_L","","","",
+	/*L0-L7*/	"","","","host0-sysreset-n","s0-spi-auth-fail-n","","","",
 	/*M0-M7*/	"","","","","","","","",
 	/*N0-N7*/	"","","","","","","","",
 	/*O0-O7*/	"","","","","","","","",
 	/*P0-P7*/	"","","","","","","","",
-	/*Q0-Q7*/	"","","","","","UID_BUTTON","","",
-	/*R0-R7*/	"","","BMC_EXT_HIGHTEMP_L","OCP_AUX_PWREN",
-			"OCP_MAIN_PWREN","RESET_BUTTON","","",
+	/*Q0-Q7*/	"","","","","","identify-button","","",
+	/*R0-R7*/	"","","ext-hightemp-n","",
+			"ocp-main-pwren","reset-button","","",
 	/*S0-S7*/	"","","","","rtc-battery-voltage-read-enable","","","",
 	/*T0-T7*/	"","","","","","","","",
 	/*U0-U7*/	"","","","","","","","",
@@ -791,18 +791,18 @@
 	/*W0-W7*/	"","","","","","","","",
 	/*X0-X7*/	"","","","","","","","",
 	/*Y0-Y7*/	"","","","","","","","",
-	/*Z0-Z7*/	"S0_BMC_PLIMIT","S1_FAULT_L","S1_FW_BOOT_OK","","",
-			"S1_SCP_AUTH_FAIL_L","S1_OVERTEMP_L","",
+	/*Z0-Z7*/	"s0-plimit","s1-fault-alert","s1-fw-boot-ok","","",
+			"s1-sys-auth-failure-n","s1-overtemp-n","",
 	/*AA0-AA7*/	"","","","","","","","",
-	/*AB0-AB7*/	"S1_HIGHTEMP_L","S1_BMC_PLIMIT","S0_BMC_DDR_ADDR",
-			"S1_BMC_DDR_ADR","","","","",
-	/*AC0-AC7*/	"SYS_PWR_GD","","","","","BMC_READY","SLAVE_PRESENT_L",
-			"BMC_OCP_PG";
+	/*AB0-AB7*/	"s1-hightemp-n","s1-plimit","s0-ddr-addr",
+			"s1-ddr-addr","","","","",
+	/*AC0-AC7*/	"sys-pwr-gd","","","","","","presence-cpu1",
+			"ocp-pgood";
 
 	i2c4-o-en-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(Y, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
-		line-name = "BMC_I2C4_O_EN";
+		line-name = "i2c4-o-en";
 	};
 };
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
index 0715cb9ab30c..2f571b43106d 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
@@ -599,17 +599,17 @@
 	/*Q0-Q7*/	"","","","","","","","",
 	/*R0-R7*/	"","","","","","","","",
 	/*S0-S7*/	"","","identify-button","led-identify",
-			"s1-ddr-save","spi-nor-access","sys-pgood","presence-cpu1",
+			"s1-ddr-save","spi-nor-access","host0-ready","presence-cpu1",
 	/*T0-T7*/	"","","","","","","","",
 	/*U0-U7*/	"","","","","","","","",
 	/*V0-V7*/	"s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n",
-			"host0-reboot-ack-n","host0-ready","host0-shd-req-n",
+			"host0-reboot-ack-n","s0-fw-boot-ok","host0-shd-req-n",
 			"host0-shd-ack-n","s0-overtemp-n",
 	/*W0-W7*/	"","ocp-main-pwren","ocp-pgood","",
 			"bmc-ok","bmc-ready","spi0-program-sel","spi0-backup-sel",
 	/*X0-X7*/	"i2c-backup-sel","s1-fault-alert","s1-fw-boot-ok",
 			"s1-hightemp-n","s0-spi-auth-fail-n","s1-sys-auth-failure-n",
-			"s1-overtemp-n","s1-spi-auth-fail-n",
+			"s1-overtemp-n","cpld-s1-spi-auth-fail-n",
 	/*Y0-Y7*/	"","","","","","","","host0-special-boot",
 	/*Z0-Z7*/	"reset-button","ps0-pgood","ps1-pgood","","","","","";
 
-- 
2.17.1