[PATCH v2 1/1] ARM: dts: aspeed-g6: add aliases for mdio nodes

[Patrick Williams]

On Tue, Oct 25, 2022 at 01:50:46PM +0800, Potin Lai wrote:
> Add aliases for mdio nodes so that we can use name to lookup the
> bus address of Aspeed SOC.
> 
> For example:
> root at bletchley:~# cat /sys/firmware/devicetree/base/aliases/mdio0
> /ahb/mdio at 1e650000
> root at bletchley:~# cat /sys/firmware/devicetree/base/aliases/mdio1
> /ahb/mdio at 1e650008
> root at bletchley:~# cat /sys/firmware/devicetree/base/aliases/mdio2
> /ahb/mdio at 1e650010
> root at bletchley:~# cat /sys/firmware/devicetree/base/aliases/mdio3
> /ahb/mdio at 1e650018
> 
> Signed-off-by: Potin Lai <potin.lai.pt at gmail.com>
> ---
> LINK: [v1] https://lore.kernel.org/all/20221025024145.1561047-1-potin.lai.pt@gmail.com/
> 
> change v1 --> v2:
> * move mdio aliases to aspeed-g6.dtsi
> ---
>  arch/arm/boot/dts/aspeed-g6.dtsi | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
> index 0cc92874caa8..6f159ef1efbc 100644
> --- a/arch/arm/boot/dts/aspeed-g6.dtsi
> +++ b/arch/arm/boot/dts/aspeed-g6.dtsi
> @@ -36,6 +36,10 @@ aliases {
>  		serial4 = &uart5;
>  		serial5 = &vuart1;
>  		serial6 = &vuart2;
> +		mdio0 = &mdio0;
> +		mdio1 = &mdio1;
> +		mdio2 = &mdio2;
> +		mdio3 = &mdio3;
>  	};
>  
>  
> -- 
> 2.31.1
> 

Reviewed-by: Patrick Williams <patrick at stwcx.xyz>

-- 
Patrick Williams
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.ozlabs.org/pipermail/linux-aspeed/attachments/20230103/59225aeb/attachment.sig>