[PATCH v4 2/3] dt-bindings: i2c-ast2600: Add support for AST2600 i2C driver

Ryan Chen ryan_chen at aspeedtech.com
Thu Feb 16 20:17:12 AEDT 2023


Hello Dhananjay,

> -----Original Message-----
> From: Dhananjay Phadke <dphadke at linux.microsoft.com>
> Sent: Thursday, February 16, 2023 12:17 PM
> To: Ryan Chen <ryan_chen at aspeedtech.com>; Krzysztof Kozlowski
> <krzysztof.kozlowski at linaro.org>; Rob Herring <robh+dt at kernel.org>; Krzysztof
> Kozlowski <krzysztof.kozlowski+dt at linaro.org>; Joel Stanley <joel at jms.id.au>;
> Andrew Jeffery <andrew at aj.id.au>; Philipp Zabel <p.zabel at pengutronix.de>;
> openbmc at lists.ozlabs.org; linux-arm-kernel at lists.infradead.org;
> linux-aspeed at lists.ozlabs.org; linux-kernel at vger.kernel.org
> Subject: Re: [PATCH v4 2/3] dt-bindings: i2c-ast2600: Add support for AST2600
> i2C driver
> 
> Hi Ryan,
> 
> On 2/14/2023 9:43 PM, Ryan Chen wrote:
> > It is not duplicated, as my description in cover " This series add AST2600 i2c
> new register set driver"
> > So, this will be different driver compatible.
> > The original compatible is
> >        - aspeed,ast2400-i2c-bus
> >        - aspeed,ast2500-i2c-bus
> >        - aspeed,ast2600-i2c-bus
> > So the new register set compatible is "- aspeed,ast2600-i2c", remove "bus".
> 
> Is it possible to keep existing driver drivers/i2c/busses/i2c-aspeed.c for
> ast2400/ast2500, while move ast2600 support to new driver altogether, say
> i2c-ast2600.c along with new register mode? By default new driver can
> support legacy mode with same compatible "aspeed,ast2600- i2c-bus",
> additionally driven by dt props, switch to new mode.

No, as the patch cover latter description, it is two different register offsets.
Pure new register control, and also different control sequence.

Regards,
Ryan


More information about the Linux-aspeed mailing list