[PATCH v1 8/8] ARM: dts: aspeed: System1: PS, sensor and more

[Ninad Palsule]

Hello Krzysztof,

On 12/12/23 14:26, Krzysztof Kozlowski wrote:
> On 12/12/2023 17:40, Ninad Palsule wrote:
>> This drop adds following devices in the device tree.
>> - EEPROM/VPD
>> - Power supplies
>> - Humidity, pressure and temperature sensors.
>> - Trusted platform module(TPM) chip
>>
>> Tested:
>>      This board is tested using the simics simulator.
>>
>> Signed-off-by: Ninad Palsule <ninad at linux.ibm.com>
>> ---
> Don't mix DTS with drivers. DTS and drivers go via different subsystems
> and cannot have dependencies, so why DTS is patch #6, then driver #7 and
> now again DTS #7?

There is a dependency on driver code as patch #8 uses the compatibility 
string added in driver patch #7.  I have now moved driver patch at the 
start. Is that ok? OR you are suggesting something else?

v1-0001-tpm-tis-i2c-Add-more-compatible-strings.patch
                         |
v1-0009-ARM-dts-aspeed-System1-PS-sensor-and-more.patch

>
>>   .../dts/aspeed/aspeed-bmc-ibm-system1.dts     | 76 +++++++++++++++++++
>>   1 file changed, 76 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
>> index 75562aa63701..d960b938fe8d 100644
>> --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
>> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
>> @@ -461,6 +461,11 @@ &kcs3 {
>>   &i2c0 {
>>   	status = "okay";
>>   
>> +	eeprom at 50 {
>> +		compatible = "atmel,24c64";
>> +		reg = <0x50>;
>> +	};
>> +
>>   	regulator at 60 {
>>   		compatible = "maxim,max8952";
>>   		reg = <0x60>;
>> @@ -655,6 +660,25 @@ pca0: pca9539 at 74 {
>>   
>>   &i2c2 {
>>   	status = "okay";
>> +
>> +	power-supply at 58 {
>> +		compatible = "ibm,cffps";
>> +		reg = <0x58>;
>> +	};
>> +
>> +	power-supply at 59 {
>> +		compatible = "ibm,cffps";
>> +		reg = <0x59>;
>> +	};
>> +
>> +	power-supply at 5a {
>> +		compatible = "ibm,cffps";
>> +		reg = <0x5a>;
>> +	};
> Missing blank line

Fixed it.

Thanks for the review.

Regards,

Ninad

>
>> +	power-supply at 5b {
>> +		compatible = "ibm,cffps";
>> +		reg = <0x5b>;
>> +	};
>
> Best regards,
> Krzysztof
>