[PATCH v1 6/8] ARM: dts: aspeed: System1: GPIO, Fan ctrl, Led
Ninad Palsule
ninad at linux.ibm.com
Wed Dec 13 03:40:02 AEDT 2023
This commit adds following devices to the device tree.
- GPIO pin assignements, GPIO expansion devices
- LED brinker devices
- Fan controllers
Tested:
This board is tested using the simics simulator.
Signed-off-by: Ninad Palsule <ninad at linux.ibm.com>
---
.../dts/aspeed/aspeed-bmc-ibm-system1.dts | 547 +++++++++++++++++-
1 file changed, 542 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
index b8e7e52d4600..75562aa63701 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
@@ -114,6 +114,99 @@ vga_memory: region at bf000000 {
};
};
+ leds {
+ compatible = "gpio-leds";
+
+ bmc-ready {
+ gpios = <&gpio0 ASPEED_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
+ };
+
+ bmc-hb {
+ gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_HIGH>;
+ };
+
+ rear-enc-fault0 {
+ gpios = <&gpio0 ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
+ };
+
+ rear-enc-id0 {
+ gpios = <&gpio0 ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+ };
+
+ fan0-fault-led {
+ gpios = <&pca3 5 GPIO_ACTIVE_LOW>;
+ };
+
+ fan1-fault-led {
+ gpios = <&pca3 6 GPIO_ACTIVE_LOW>;
+ };
+
+ fan2-fault-led {
+ gpios = <&pca3 7 GPIO_ACTIVE_LOW>;
+ };
+
+ fan3-fault-led {
+ gpios = <&pca3 8 GPIO_ACTIVE_LOW>;
+ };
+
+ fan4-fault-led {
+ gpios = <&pca3 9 GPIO_ACTIVE_LOW>;
+ };
+
+ fan5-fault-led {
+ gpios = <&pca3 10 GPIO_ACTIVE_LOW>;
+ };
+
+ fan6-fault-led {
+ gpios = <&pca3 11 GPIO_ACTIVE_LOW>;
+ };
+
+ nvmed0-fault-led {
+ gpios = <&pca4 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ nvmed1-fault-led {
+ gpios = <&pca4 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ nvmed2-fault-led {
+ gpios = <&pca4 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ nvmed3-fault-led {
+ gpios = <&pca4 7 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ poll-interval = <1000>;
+
+ event-nvme0-presence {
+ label = "nvme0-presence";
+ gpios = <&pca4 0 GPIO_ACTIVE_LOW>;
+ linux,code = <0>;
+ };
+
+ event-nvme1-presence {
+ label = "nvme1-presence";
+ gpios = <&pca4 1 GPIO_ACTIVE_LOW>;
+ linux,code = <1>;
+ };
+
+ event-nvme2-presence {
+ label = "nvme2-presence";
+ gpios = <&pca4 2 GPIO_ACTIVE_LOW>;
+ linux,code = <2>;
+ };
+
+ event-nvme3-presence {
+ label = "nvme3-presence";
+ gpios = <&pca4 3 GPIO_ACTIVE_LOW>;
+ linux,code = <3>;
+ };
+ };
+
iio-hwmon {
compatible = "iio-hwmon";
io-channels = <&p12v_vd 0>, <&p5v_aux_vd 0>,
@@ -259,7 +352,7 @@ &uhci {
&gpio0 {
gpio-line-names =
/*A0-A7*/ "","","","","","","","",
- /*B0-B7*/ "","","","","","","","",
+ /*B0-B7*/ "","","","","bmc-tpm-reset","","","",
/*C0-C7*/ "","","","","","","","",
/*D0-D7*/ "","","","","","","","",
/*E0-E7*/ "","","","","","","","",
@@ -269,17 +362,17 @@ &gpio0 {
/*I0-I7*/ "","","","","","","","",
/*J0-J7*/ "","","","","","","","",
/*K0-K7*/ "","","","","","","","",
- /*L0-L7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","","","","bmc-ready",
/*M0-M7*/ "","","","","","","","",
/*N0-N7*/ "","","","","","","","",
/*O0-O7*/ "","","","","","","","",
- /*P0-P7*/ "","","","","","","","",
+ /*P0-P7*/ "","","","","","","","bmc-hb",
/*Q0-Q7*/ "","","","","","","","",
/*R0-R7*/ "","","","","","","","",
- /*S0-S7*/ "","","","","","","","",
+ /*S0-S7*/ "","","","","","","rear-enc-fault0","rear-enc-id0",
/*T0-T7*/ "","","","","","","","",
/*U0-U7*/ "","","","","","","","",
- /*V0-V7*/ "","","","power-chassis-control","","","","",
+ /*V0-V7*/ "","rtc-battery-voltage-read-enable","","power-chassis-control","","","","",
/*W0-W7*/ "","","","","","","","",
/*X0-X7*/ "","power-chassis-good","","","","","","",
/*Y0-Y7*/ "","","","","","","","",
@@ -393,6 +486,171 @@ regulator at 42 {
compatible = "infineon,ir38263";
reg = <0x42>;
};
+
+ led-controller at 60 {
+ compatible = "nxp,pca9552";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led at 0 {
+ label = "nic1-perst";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 1 {
+ label = "bmc-perst";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 2 {
+ label = "reset-M2-SSD1-2-perst";
+ reg = <2>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 3 {
+ label = "pcie-perst1";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 4 {
+ label = "pcie-perst2";
+ reg = <4>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 5 {
+ label = "pcie-perst3";
+ reg = <5>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 6 {
+ label = "pcie-perst4";
+ reg = <6>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 7 {
+ label = "pcie-perst5";
+ reg = <7>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 8 {
+ label = "pcie-perst6";
+ reg = <8>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 9 {
+ label = "pcie-perst7";
+ reg = <9>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 10 {
+ label = "pcie-perst8";
+ reg = <10>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 11 {
+ label = "PV-cp0-sw1stk4-perst";
+ reg = <11>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 12 {
+ label = "PV-cp0-sw1stk5-perst";
+ reg = <12>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 13 {
+ label = "pe-cp-drv0-perst";
+ reg = <13>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 14 {
+ label = "pe-cp-drv1-perst";
+ reg = <14>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 15 {
+ label = "lom-perst";
+ reg = <15>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ pca0: pca9539 at 74 {
+ compatible = "nxp,pca9539";
+ reg = <0x74>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "PLUG_DETECT_PCIE_J101_N",
+ "PLUG_DETECT_PCIE_J102_N",
+ "PLUG_DETECT_PCIE_J103_N",
+ "PLUG_DETECT_PCIE_J104_N",
+ "PLUG_DETECT_PCIE_J105_N",
+ "PLUG_DETECT_PCIE_J106_N",
+ "PLUG_DETECT_PCIE_J107_N",
+ "PLUG_DETECT_PCIE_J108_N",
+ "PLUG_DETECT_M2_SSD1_N",
+ "PLUG_DETECT_NIC1_N",
+ "SEL_SMB_DIMM_CPU0",
+ "presence-ps2",
+ "presence-ps3",
+ "", "",
+ "PWRBRD_PLUG_DETECT2_N";
+ };
};
&i2c2 {
@@ -486,6 +744,20 @@ regulator at 43 {
&i2c6 {
status = "okay";
+ fan-controller at 52 {
+ compatible = "maxim,max31785a";
+ reg = <0x52>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ fan-controller at 54 {
+ compatible = "maxim,max31785a";
+ reg = <0x54>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
i2c-mux at 70 {
compatible = "nxp,pca9548";
reg = <0x70>;
@@ -522,6 +794,48 @@ i2c6mux0chn4: i2c at 4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
+
+ led-controller at 60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led at 0 {
+ label = "enclosure-id-led";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 1 {
+ label = "attention-led";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 2 {
+ label = "enclosure-fault-rollup-led";
+ reg = <2>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 3 {
+ label = "power-on-led";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
};
i2c6mux0chn5: i2c at 5 {
@@ -542,6 +856,44 @@ i2c6mux0chn7: i2c at 7 {
reg = <7>;
};
};
+
+ pca3: pca9539 at 74 {
+ compatible = "nxp,pca9539";
+ reg = <0x74>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ pca4: pca9539 at 77 {
+ compatible = "nxp,pca9539";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "PE_NVMED0_EXP_PRSNT_N",
+ "PE_NVMED1_EXP_PRSNT_N",
+ "PE_NVMED2_EXP_PRSNT_N",
+ "PE_NVMED3_EXP_PRSNT_N",
+ "LED_FAULT_NVMED0",
+ "LED_FAULT_NVMED1",
+ "LED_FAULT_NVMED2",
+ "LED_FAULT_NVMED3",
+ "FAN0_PRESENCE_R_N",
+ "FAN1_PRESENCE_R_N",
+ "FAN2_PRESENCE_R_N",
+ "FAN3_PRESENCE_R_N",
+ "FAN4_PRESENCE_R_N",
+ "FAN5_PRESENCE_N",
+ "FAN6_PRESENCE_N",
+ "";
+ };
};
&i2c7 {
@@ -809,6 +1161,191 @@ regulator at 41 {
compatible = "infineon,ir38263";
reg = <0x41>;
};
+
+ led-controller at 61 {
+ compatible = "nxp,pca9552";
+ reg = <0x61>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led at 0 {
+ label = "efuse-12v-slots";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 1 {
+ label = "efuse-3p3v-slot";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 3 {
+ label = "nic2-pert";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 4 {
+ label = "pcie-perst9";
+ reg = <4>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 5 {
+ label = "pcie-perst10";
+ reg = <5>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 6 {
+ label = "pcie-perst11";
+ reg = <6>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 7 {
+ label = "pcie-perst12";
+ reg = <7>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 8 {
+ label = "pcie-perst13";
+ reg = <8>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 9 {
+ label = "pcie-perst14";
+ reg = <9>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 10 {
+ label = "pcie-perst15";
+ reg = <10>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 11 {
+ label = "pcie-perst16";
+ reg = <11>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 12 {
+ label = "PV-cp1-sw1stk4-perst";
+ reg = <12>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 13 {
+ label = "PV-cp1-sw1stk5-perst";
+ reg = <13>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 14 {
+ label = "pe-cp-drv2-perst";
+ reg = <14>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led at 15 {
+ label = "pe-cp-drv3-perst";
+ reg = <15>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ pca1: pca9539 at 75 {
+ compatible = "nxp,pca9539";
+ reg = <0x75>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "PLUG_DETECT_PCIE_J109_N",
+ "PLUG_DETECT_PCIE_J110_N",
+ "PLUG_DETECT_PCIE_J111_N",
+ "PLUG_DETECT_PCIE_J112_N",
+ "PLUG_DETECT_PCIE_J113_N",
+ "PLUG_DETECT_PCIE_J114_N",
+ "PLUG_DETECT_PCIE_J115_N",
+ "PLUG_DETECT_PCIE_J116_N",
+ "PLUG_DETECT_M2_SSD2_N",
+ "PLUG_DETECT_NIC2_N",
+ "SEL_SMB_DIMM_CPU1",
+ "presence-ps0",
+ "presence-ps1",
+ "", "",
+ "PWRBRD_PLUG_DETECT1_N";
+ };
+
+ pca2: pca9539 at 76 {
+ compatible = "nxp,pca9539";
+ reg = <0x76>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "SW1_BOOTRCVRYB1_N",
+ "SW1_BOOTRCVRYB0_N",
+ "SW2_BOOTRCVRYB1_N",
+ "SW2_BOOTRCVRYB0_N",
+ "SW3_4_BOOTRCVRYB1_N",
+ "SW3_4_BOOTRCVRYB0_N",
+ "SW5_BOOTRCVRYB1_N",
+ "SW5_BOOTRCVRYB0_N",
+ "SW6_BOOTRCVRYB1_N",
+ "SW6_BOOTRCVRYB0_N",
+ "SW1_RESET_N",
+ "SW3_RESET_N",
+ "SW4_RESET_N",
+ "SW2_RESET_N",
+ "SW5_RESET_N",
+ "SW6_RESET_N";
+ };
};
&i2c14 {
--
2.39.2
More information about the Linux-aspeed
mailing list