[v2 2/2] dt-bindings: iio: adc: Remove the property "aspeed,trim-data-valid"

[Billy Tsai]

The valid of the trimming data will use the otp default value as a
criterion.

Fixes: 2bdb2f00a895 ("dt-bindings: iio: adc: Add ast2600-adc bindings")
Signed-off-by: Billy Tsai <billy_tsai at aspeedtech.com>
---
 .../devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml    | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml
index b283c8ca2bbf..5c08d8b6e995 100644
--- a/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml
@@ -62,13 +62,6 @@ properties:
     description:
       Inform the driver that last channel will be used to sensor battery.
 
-  aspeed,trim-data-valid:
-    type: boolean
-    description: |
-      The ADC reference voltage can be calibrated to obtain the trimming
-      data which will be stored in otp. This property informs the driver that
-      the data store in the otp is valid.
-
 required:
   - compatible
   - reg
-- 
2.25.1