[PATCH v3 2/3] ARM: dts: aspeed: Add USB2.0 device controller node

Neal Liu neal_liu at aspeedtech.com
Wed May 18 16:20:42 AEST 2022


Add USB2.0 device controller(udc) node to device tree
for AST2600.

Signed-off-by: Neal Liu <neal_liu at aspeedtech.com>
---
 arch/arm/boot/dts/aspeed-g6.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 3d5ce9da42c3..822f4fd854f5 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -298,6 +298,16 @@ vhub: usb-vhub at 1e6a0000 {
 			status = "disabled";
 		};
 
+		udc: usb at 1e6a2000 {
+			compatible = "aspeed,ast2600-udc";
+			reg = <0x1e6a2000 0x300>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2bd_default>;
+			status = "disabled";
+		};
+
 		apb {
 			compatible = "simple-bus";
 			#address-cells = <1>;
-- 
2.25.1



More information about the Linux-aspeed mailing list