[PATCH v2 1/5] crypto: aspeed: Add HACE hash driver
Neal Liu
neal_liu at aspeedtech.com
Tue Jun 7 13:11:51 AEST 2022
> > +
> > +/*
> > + * Prepare DMA buffer as SG list buffer before
> > + * hardware engine processing.
> > + */
> > +static int aspeed_ahash_dma_prepare_sg(struct aspeed_hace_dev
> > +*hace_dev) {
> > + struct aspeed_engine_hash *hash_engine = &hace_dev->hash_engine;
> > + struct ahash_request *req = hash_engine->ahash_req;
> > + struct aspeed_sham_reqctx *rctx = ahash_request_ctx(req);
> > + struct aspeed_sg_list *src_list;
> > + struct scatterlist *s;
> > + int length, remain, sg_len, i;
> > + int rc = 0;
> > +
> > + remain = (rctx->total + rctx->bufcnt) % rctx->block_size;
> > + length = rctx->total + rctx->bufcnt - remain;
> > +
> > + AHASH_DBG(hace_dev, "%s:0x%x, %s:0x%x, %s:0x%x, %s:0x%x\n",
> > + "rctx total", rctx->total, "bufcnt", rctx->bufcnt,
> > + "length", length, "remain", remain);
> > +
> > + sg_len = dma_map_sg(hace_dev->dev, rctx->src_sg, rctx->src_nents,
> > + DMA_TO_DEVICE);
> > + if (!sg_len) {
> > + dev_warn(hace_dev->dev, "dma_map_sg() src error\n");
> > + rc = -ENOMEM;
>
> Direct return, as done in v1, looks fine to me. But it is mostly a matter of test, I
> guess.
>
> > + goto end;
> > + }
> > +
> > + src_list = (struct aspeed_sg_list *)hash_engine->ahash_src_addr;
> > + rctx->digest_dma_addr = dma_map_single(hace_dev->dev, rctx->digest,
> > + SHA512_DIGEST_SIZE,
> > + DMA_BIDIRECTIONAL);
> > + if (dma_mapping_error(hace_dev->dev, rctx->digest_dma_addr)) {
> > + dev_warn(hace_dev->dev, "dma_map() rctx digest error\n");
> > + rc = -ENOMEM;
> > + goto free_src_sg;
> > + }
> > +
> > + if (rctx->bufcnt != 0) {
> > + rctx->buffer_dma_addr = dma_map_single(hace_dev->dev,
> > + rctx->buffer,
> > + rctx->block_size * 2,
> > + DMA_TO_DEVICE);
> > + if (dma_mapping_error(hace_dev->dev, rctx->buffer_dma_addr)) {
> > + dev_warn(hace_dev->dev, "dma_map() rctx buffer error\n");
> > + rc = -ENOMEM;
> > + goto free_rctx_digest;
> > + }
> > +
> > + src_list[0].phy_addr = rctx->buffer_dma_addr;
> > + src_list[0].len = rctx->bufcnt;
> > + length -= src_list[0].len;
> > +
> > + /* Last sg list */
> > + if (length == 0)
> > + src_list[0].len |= HASH_SG_LAST_LIST;
> > + src_list++;
> > + }
> > +
> > + if (length != 0) {
> > + for_each_sg(rctx->src_sg, s, sg_len, i) {
> > + src_list[i].phy_addr = sg_dma_address(s);
> > +
> > + if (length > sg_dma_len(s)) {
> > + src_list[i].len = sg_dma_len(s);
> > + length -= sg_dma_len(s);
> > +
> > + } else {
> > + /* Last sg list */
> > + src_list[i].len = length;
> > + src_list[i].len |= HASH_SG_LAST_LIST;
> > + length = 0;
> > + break;
> > + }
> > + }
> > + }
> > +
> > + if (length != 0) {
> > + rc = -EINVAL;
> > + goto free_rctx_buffer;
> > + }
> > +
> > + rctx->offset = rctx->total - remain;
> > + hash_engine->src_length = rctx->total + rctx->bufcnt - remain;
> > + hash_engine->src_dma = hash_engine->ahash_src_dma_addr;
> > + hash_engine->digest_dma = rctx->digest_dma_addr;
> > +
> > + goto end;
> > +
> > +free_rctx_buffer:
> > + dma_unmap_single(hace_dev->dev, rctx->buffer_dma_addr,
> > + rctx->block_size * 2, DMA_TO_DEVICE);
>
> If "rctx->bufcnt == 0" the correspondning dma_map_single() has not been
> called. Is it an issue? (the test exists in aspeed_ahash_update_resume_sg(), so
> I guess it is needed)
Yes, I miss this part. I'll revise it in next patch, thanks.
>
> > +free_rctx_digest:
> > + dma_unmap_single(hace_dev->dev, rctx->digest_dma_addr,
> > + SHA512_DIGEST_SIZE, DMA_BIDIRECTIONAL);
> > +free_src_sg:
> > + dma_unmap_sg(hace_dev->dev, rctx->src_sg, rctx->src_nents,
> > + DMA_TO_DEVICE);
> > +end:
> > + return rc;
> > +}
> > +
>
> [...]
More information about the Linux-aspeed
mailing list