[PATCH 5/5] crypto: aspeed: add HACE crypto driver
Neal Liu
neal_liu at aspeedtech.com
Thu Jun 2 16:53:57 AEST 2022
> Le 01/06/2022 à 07:42, Neal Liu a écrit :
> > Add HACE crypto driver to support symmetric-key > encryption and
> decryption with multiple modes of > operation.
> >
> > Signed-off-by: Neal Liu <neal_liu at aspeedtech.com> > Signed-off-by:
> Johnny Huang <johnny_huang at aspeedtech.com> > ---
> > drivers/crypto/aspeed/Kconfig | 16 +
> > drivers/crypto/aspeed/Makefile | 2 +
> > drivers/crypto/aspeed/aspeed-hace-crypto.c | 1019
> ++++++++++++++++++++
> > drivers/crypto/aspeed/aspeed-hace.c | 101 +-
> > drivers/crypto/aspeed/aspeed-hace.h | 107 ++
> > 5 files changed, 1242 insertions(+), 3 deletions(-)
> > create mode 100644 drivers/crypto/aspeed/aspeed-hace-crypto.c
> >
> > diff --git a/drivers/crypto/aspeed/Kconfig b/drivers/crypto/aspeed/Kconfig
> > index 17b800286a51..5e4d18288bf1 100644 [...]
>
> > +int aspeed_register_hace_crypto_algs(struct aspeed_hace_dev *hace_dev)
> > +{
> > + int rc, i;
> > +
> > + for (i = 0; i < ARRAY_SIZE(aspeed_crypto_algs); i++) {
> > + aspeed_crypto_algs[i].hace_dev = hace_dev;
> > + rc = crypto_register_skcipher(&aspeed_crypto_algs[i].alg.skcipher);
> > + if (rc)
> > + return rc;
> > + }
> > +
> > + if (hace_dev->version == AST2600_VERSION) {
> > + for (i = 0; i < ARRAY_SIZE(aspeed_crypto_algs_g6); i++) {
> > + aspeed_crypto_algs_g6[i].hace_dev = hace_dev;
> > + rc = crypto_register_skcipher(
> > + &aspeed_crypto_algs_g6[i].alg.skcipher);
> > + if (rc)
> > + return rc;
> > + }
> > + }
> Should there be some kind of error handling here, in order to undo things
> already done if an error occures?
No need. .remove function would do the error handling stuffs.
>
> > +
> > + return 0;
> > +}
> > diff --git a/drivers/crypto/aspeed/aspeed-hace.c
> b/drivers/crypto/aspeed/aspeed-hace.c
> > index f25b13d120e8..f7f90c230843 100644 > ---
> a/drivers/crypto/aspeed/aspeed-hace.c
> > +++ b/drivers/crypto/aspeed/aspeed-hace.c
> > @@ -40,10 +40,30 @@ void __weak
[...]
> > @@ -56,12 +76,36 @@ static irqreturn_t aspeed_hace_irq(int irq, void
> *dev)
> > if (hash_engine->flags & CRYPTO_FLAGS_BUSY)
> > tasklet_schedule(&hash_engine->done_task);
> > else
> > - dev_warn(hace_dev->dev, "no active requests.\n");
> > + dev_warn(hace_dev->dev, "HASH no active requests.\n");
> To reduce diff, maybe this could already be part of patch 1/5?
Sure !
>
> > + }
> > +
> > + if (sts & HACE_CRYPTO_ISR) {
> > + if (crypto_engine->flags & CRYPTO_FLAGS_BUSY)
> > + tasklet_schedule(&crypto_engine->done_task);
> > + else
> > + dev_warn(hace_dev->dev, "CRYPTO no active requests.\n");
> > }
> >
> > return IRQ_HANDLED;
> > }
> >
> > +static void aspeed_hace_cryptro_done_task(unsigned long data) > +{
> > + struct aspeed_hace_dev *hace_dev = (struct aspeed_hace_dev *)data;
> > + struct aspeed_engine_crypto *crypto_engine;
> > +
> > + crypto_engine = &hace_dev->crypto_engine;
> > + crypto_engine->is_async = true;
> > + crypto_engine->resume(hace_dev);
> > +}
> > +
> > +static void aspeed_hace_crypto_queue_task(unsigned long data) > +{
> > + struct aspeed_hace_dev *hace_dev = (struct aspeed_hace_dev *)data;
> > +
> > + aspeed_hace_crypto_handle_queue(hace_dev, NULL);
> > +}
> > +
> > static void aspeed_hace_hash_done_task(unsigned long data)
> > {
> > struct aspeed_hace_dev *hace_dev = (struct aspeed_hace_dev
> *)data;
> > @@ -79,12 +123,27 @@ static void
> aspeed_hace_hash_queue_task(unsigned
> long data)
> >
> > static int aspeed_hace_register(struct aspeed_hace_dev *hace_dev)
> > {
> > - return aspeed_register_hace_hash_algs(hace_dev);
> > + int rc1, rc2;
> > +
> > + rc1 = aspeed_register_hace_hash_algs(hace_dev);
> > + if (rc1) {
> > + HACE_DBG(hace_dev, "Failed to register hash alg, rc:0x%x\n",
> > + rc1);
> > + }
> > +
> > + rc2 = aspeed_register_hace_crypto_algs(hace_dev);
> > + if (rc2) {
> > + HACE_DBG(hace_dev, "Failed to register crypto alg, rc:0x%x\n",
> > + rc2);
> > + }
> > +
> > + return rc1 + rc2;
> This looks odd. The error returned could finally be pointless if both
> rc1 and rc2 are not 0.
This function aims to register both hash & symmetric algo for further use.
It's fine if either of them register failed. The return value is only the information and it will not have different control flow.
>
> > }
> >
> > static void aspeed_hace_unregister(struct aspeed_hace_dev *hace_dev)
> > {
> > aspeed_unregister_hace_hash_algs(hace_dev);
> > + aspeed_unregister_hace_crypto_algs(hace_dev);
> > }
> >
> > static const struct of_device_id aspeed_hace_of_matches[] = {
> > @@ -95,6 +154,7 @@ static const struct of_device_id
> aspeed_hace_of_matches[] = { >
> > static int aspeed_hace_probe(struct platform_device *pdev)
> > {
> > + struct aspeed_engine_crypto *crypto_engine;
> > const struct of_device_id *hace_dev_id;
> > struct aspeed_engine_hash *hash_engine;
> > struct aspeed_hace_dev *hace_dev;
> > @@ -115,6 +175,7 @@ static int aspeed_hace_probe(struct
> platform_device *pdev)
> > hace_dev->dev = &pdev->dev;
> > hace_dev->version = (unsigned long)hace_dev_id->data;
> > hash_engine = &hace_dev->hash_engine;
> > + crypto_engine = &hace_dev->crypto_engine;
> >
> > res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> >
> > @@ -127,6 +188,13 @@ static int aspeed_hace_probe(struct
> platform_device *pdev)
> > (unsigned long)hace_dev);
> > crypto_init_queue(&hash_engine->queue,
> ASPEED_HASH_QUEUE_LENGTH);
> >
> > + spin_lock_init(&crypto_engine->lock);
> > + tasklet_init(&crypto_engine->done_task,
> aspeed_hace_cryptro_done_task,
> > + (unsigned long)hace_dev);
> > + tasklet_init(&crypto_engine->queue_task,
> aspeed_hace_crypto_queue_task,
> > + (unsigned long)hace_dev);
> > + crypto_init_queue(&crypto_engine->queue,
> ASPEED_HASH_QUEUE_LENGTH);
> > +
> > hace_dev->regs = devm_ioremap_resource(&pdev->dev, res);
> > if (!hace_dev->regs) {
> > dev_err(&pdev->dev, "Failed to map resources\n");
> > @@ -168,9 +236,36 @@ static int aspeed_hace_probe(struct
> platform_device *pdev)
> > return -ENOMEM;
> > }
> >
> > + crypto_engine->cipher_ctx =
> > + dma_alloc_coherent(&pdev->dev,
> > + PAGE_SIZE,
> > + &crypto_engine->cipher_ctx_dma,
> > + GFP_KERNEL);
> Should all these dma_alloc_coherent() be undone in the error handling path of
> the probe and in the .rmove function?
> If applicable, maybe dmam_alloc_coherent() would ease? realeasing of
> resources?
You're right. I'll forgot this part. I'll revise it on next patch, Thanks.
>
> > + crypto_engine->cipher_addr =
> > + dma_alloc_coherent(&pdev->dev,
> > + ASPEED_CRYPTO_SRC_DMA_BUF_LEN,
> > + &crypto_engine->cipher_dma_addr,
> > + GFP_KERNEL);
> > + if (!crypto_engine->cipher_ctx || !crypto_engine->cipher_addr) {
> > + dev_err(&pdev->dev, "Failed to allocate cipher dma\n");
> > + return -ENOMEM;
> > + }
> > +
> > + if (hace_dev->version == AST2600_VERSION) {
> > + crypto_engine->dst_sg_addr =
> > + dma_alloc_coherent(&pdev->dev,
> > + ASPEED_CRYPTO_DST_DMA_BUF_LEN,
> > + &crypto_engine->dst_sg_dma_addr,
> > + GFP_KERNEL);
> > + if (!crypto_engine->dst_sg_addr) {
> > + dev_err(&pdev->dev, "Failed to allocate dst_sg dma\n");
> > + return -ENOMEM;
> > + }
> > + }
> > +
> > rc = aspeed_hace_register(hace_dev);
> > if (rc) {
> > - dev_err(&pdev->dev, "Failed to register hash alg, rc:0x%x\n", rc);
> > + dev_err(&pdev->dev, "Failed to register algs, rc:0x%x\n", rc);
> To reduce diff, maybe this could already be part of patch 1/5?
Sure !
>
> > rc = 0;
> > }
> > [...]
More information about the Linux-aspeed
mailing list