[PATCH 2/4] ARM: dts: aspeed: ethanolx: Configure RTS/CTS for UART1

[Andrew Jeffery]

On Sat, 11 Jun 2022, at 19:28, Konstantin Aladyshev wrote:
> UART1 is used for connection to the main EPYC CPU. Besides the main
> TX/RX signals this connection has flow control signals RTS/CTS,
> therefore configure this pins on the BMC side.
>
> Signed-off-by: Konstantin Aladyshev <aladyshev22 at gmail.com>

Acked-by: Andrew Jeffery <andrew at aj.id.au>