[PATCH 1/1] ARM: dts: aspeed: Add device tree for Phytium's BMC
wangmin_phy at 126.com
wangmin_phy at 126.com
Mon Jul 11 22:23:33 AEST 2022
From: Min Wang <wangmin at phytium.com.cn>
The Phytium's BMC card is an ASPEED AST2500-based BMC for the
hardware reference platform with Phytium's Processors Family.
Signed-off-by: Min Wang <wangmin at phytium.com.cn>
---
arch/arm/boot/dts/Makefile | 3 +-
.../boot/dts/aspeed-bmc-phytium-pomelo.dts | 302 ++++++++++++++++++
2 files changed, 304 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-phytium-pomelo.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 7e0934180724..e02cd800d45a 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1497,4 +1497,5 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-opp-zaius.dtb \
aspeed-bmc-portwell-neptune.dtb \
aspeed-bmc-quanta-q71l.dtb \
- aspeed-bmc-supermicro-x11spi.dtb
+ aspeed-bmc-supermicro-x11spi.dtb \
+ aspeed-bmc-phytium-pomelo.dtb
diff --git a/arch/arm/boot/dts/aspeed-bmc-phytium-pomelo.dts b/arch/arm/boot/dts/aspeed-bmc-phytium-pomelo.dts
new file mode 100644
index 000000000000..a75017f22140
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-phytium-pomelo.dts
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "Phytium AST2500 BMC";
+ compatible = "aspeed,ast2500";
+
+ aliases {
+ serial4 = &uart5;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=tty0 console=ttyS4,115200 earlyprintk";
+ };
+
+ memory at 80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ vga_memory: framebuffer at 9c000000 {
+ no-map;
+ reg = <0x9c000000 0x04000000>; /* 64M */
+ };
+
+ video_engine_memory: jpegbuffer {
+ size = <0x02000000>; /* 32M */
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ id-button {
+ label = "id-button";
+ gpios = <&gpio ASPEED_GPIO(S, 2) GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ identify {
+ gpios = <&gpio ASPEED_GPIO(C, 6) GPIO_ACTIVE_LOW>;
+ };
+ fault {
+ gpios = <&gpio ASPEED_GPIO(C, 7) GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+ <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+ <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+ <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+ };
+};
+
+&adc {
+ status = "okay";
+};
+
+&fmc {
+ status = "okay";
+ flash at 0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+ flash at 0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "pnor";
+ spi-max-frequency = <100000000>;
+ };
+};
+
+&spi2 {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd1_default
+ &pinctrl_rxd1_default
+ &pinctrl_nrts1_default
+ &pinctrl_ndtr1_default
+ &pinctrl_ndsr1_default
+ &pinctrl_ncts1_default
+ &pinctrl_ndcd1_default
+ &pinctrl_nri1_default>;
+
+};
+
+&lpc_snoop {
+ status = "okay";
+ snoop-ports = <0x80>;
+};
+
+&kcs3 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xCA2>;
+};
+
+&kcs2 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xCA8>;
+};
+
+&mac0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+ <&syscon ASPEED_CLK_MAC1RCLK>;
+ clock-names = "MACCLK", "RCLK";
+ use-ncsi;
+};
+
+&mac1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c1 {
+ status = "okay";
+ psu1 at 58 {
+ compatible = "pmbus";
+ reg = <0x58>;
+ };
+ psu2 at 59 {
+ compatible = "pmbus";
+ reg = <0x59>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+
+};
+
+&i2c4 {
+ status = "okay";
+ rtc at 68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+
+&i2c6 {
+ status = "okay";
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+ lm75 at 48 {
+ compatible = "ti,tmp100";
+ reg = <0x48>;
+ };
+ lm75 at 49 {
+ compatible = "ti,tmp100";
+ reg = <0x49>;
+ };
+ lm75 at 4a {
+ compatible = "ti,tmp100";
+ reg = <0x4a>;
+ };
+ lm75 at 4c {
+ compatible = "ti,tmp100";
+ reg = <0x4c>;
+ };
+ lm75 at 4d {
+ compatible = "ti,tmp100";
+ reg = <0x4d>;
+ };
+ lm75 at 4e {
+ compatible = "ti,tmp100";
+ reg = <0x4e>;
+ };
+
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+
+/*
+ * Enable port A as device (via the virtual hub) and port B as
+ * host by default on the eval board. This can be easily changed
+ * by replacing the override below with &ehci0 { ... } to enable
+ * host on both ports.
+ */
+&vhub {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&uhci {
+ status = "okay";
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default
+ &pinctrl_pwm1_default
+ &pinctrl_pwm2_default
+ &pinctrl_pwm3_default
+ &pinctrl_pwm4_default
+ &pinctrl_pwm5_default
+ &pinctrl_pwm6_default
+ &pinctrl_pwm7_default>;
+
+ fan at 0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0>;
+ };
+
+ fan at 1 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x1>;
+ };
+
+ fan at 2 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x2>;
+ };
+
+ fan at 3 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x3>;
+ };
+
+ fan at 4 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x4>;
+ };
+
+ fan at 5 {
+ reg = <0x05>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x5>;
+ };
+
+ fan at 6 {
+ reg = <0x06>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x6>;
+ };
+
+ fan at 7 {
+ reg = <0x07>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x7>;
+ };
+};
+
+&video {
+ status = "okay";
+ memory-region = <&video_engine_memory>;
+};
--
2.27.0
More information about the Linux-aspeed
mailing list