[PATCH v1 2/2] drm/aspeed: Add 1024x768 mode for AST2600

Joel Stanley joel at jms.id.au
Tue Apr 26 13:27:15 AEST 2022


On Fri, 4 Mar 2022 at 06:32, Tommy Haung <tommy_huang at aspeedtech.com> wrote:
>
> Update the aspeed_gfx_set_clk with display width.
> At AST2600, the display clock could be coming from
> HPLL clock / 16 = 75MHz. It would fit 1024x768 at 70Hz.
> Another chip will still keep 800x600.
>
> Signed-off-by: Tommy Haung <tommy_huang at aspeedtech.com>
> ---
>  drivers/gpu/drm/aspeed/aspeed_gfx.h      | 12 ++++++----
>  drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c | 29 ++++++++++++++++++++----
>  drivers/gpu/drm/aspeed/aspeed_gfx_drv.c  | 16 +++++++++++--
>  drivers/gpu/drm/aspeed/aspeed_gfx_out.c  | 14 +++++++++++-
>  4 files changed, 60 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx.h b/drivers/gpu/drm/aspeed/aspeed_gfx.h
> index eb4c267cde5e..c7aefee0657a 100644
> --- a/drivers/gpu/drm/aspeed/aspeed_gfx.h
> +++ b/drivers/gpu/drm/aspeed/aspeed_gfx.h
> @@ -109,11 +109,15 @@ int aspeed_gfx_create_output(struct drm_device *drm);
>  #define CRT_THROD_HIGH(x)              ((x) << 8)
>
>  /* SCU control */
> -#define SCU_G6_CLK_COURCE              0x300
> +#define G6_CLK_SOURCE                  0x300
> +#define G6_CLK_SOURCE_MASK             (BIT(8) | BIT(9) | BIT(10))
> +#define G6_CLK_SOURCE_HPLL             (BIT(8) | BIT(9) | BIT(10))
> +#define G6_CLK_SOURCE_USB              BIT(9)
> +#define G6_CLK_SEL3                    0x308
> +#define G6_CLK_DIV_MASK                        0x3F000
> +#define G6_CLK_DIV_16                  (BIT(16)|BIT(15)|BIT(13)|BIT(12))
> +#define G6_USB_40_CLK                  BIT(9)
>
>  /* GFX FLAGS */
>  #define CLK_MASK                       BIT(0)
>  #define CLK_G6                         BIT(0)
> -
> -#define G6_CLK_MASK                    (BIT(8) | BIT(9) | BIT(10))
> -#define G6_USB_40_CLK                  BIT(9)
> diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c b/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c
> index a24fab22eac4..5829be9c7c67 100644
> --- a/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c
> +++ b/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c
> @@ -23,6 +23,28 @@ drm_pipe_to_aspeed_gfx(struct drm_simple_display_pipe *pipe)
>         return container_of(pipe, struct aspeed_gfx, pipe);
>  }
>
> +static void aspeed_gfx_set_clock_source(struct aspeed_gfx *priv, int mode_width)
> +{
> +       regmap_update_bits(priv->scu, G6_CLK_SOURCE, G6_CLK_SOURCE_MASK, 0x0);
> +       regmap_update_bits(priv->scu, G6_CLK_SEL3, G6_CLK_DIV_MASK, 0x0);
> +
> +       switch (mode_width) {
> +       case 1024:
> +               /* hpll div 16 = 75Mhz */
> +               regmap_update_bits(priv->scu, G6_CLK_SOURCE,
> +               G6_CLK_SOURCE_MASK, G6_CLK_SOURCE_HPLL);
> +               regmap_update_bits(priv->scu, G6_CLK_SEL3,
> +               G6_CLK_DIV_MASK, G6_CLK_DIV_16);
> +               break;
> +       case 800:
> +       default:
> +               /* usb 40Mhz */
> +               regmap_update_bits(priv->scu, G6_CLK_SOURCE,
> +               G6_CLK_SOURCE_MASK, G6_CLK_SOURCE_USB);
> +               break;
> +       }

I'm not familiar with this area, but I think this belongs in the clock driver.

We want to be able to call clk_set_rate() from the drm driver and have
the clock driver update the correct bits in the SCU.

Instead of specialising the 2600 vs others, could clk_set_rate() fail
on the others, and cause the driver to stay at 800x600. If the set
succeeds it can then run at the higher resolution. If this is not how
the APIs work, we could instead have a clock_rate in struct aspeed_gfx
and each platform can define its expected clock rate. It would then
need a corresponding resolution.

Please take a look at other drivers and see what they do.



> +}
> +
>  static int aspeed_gfx_set_pixel_fmt(struct aspeed_gfx *priv, u32 *bpp)
>  {
>         struct drm_crtc *crtc = &priv->pipe.crtc;
> @@ -77,12 +99,11 @@ static void aspeed_gfx_disable_controller(struct aspeed_gfx *priv)
>         regmap_update_bits(priv->scu, priv->dac_reg, BIT(16), 0);
>  }
>
> -static void aspeed_gfx_set_clk(struct aspeed_gfx *priv)
> +static void aspeed_gfx_set_clk(struct aspeed_gfx *priv, int mode_width)
>  {
>         switch (priv->flags & CLK_MASK) {
>         case CLK_G6:
> -               regmap_update_bits(priv->scu, SCU_G6_CLK_COURCE, G6_CLK_MASK, 0x0);
> -               regmap_update_bits(priv->scu, SCU_G6_CLK_COURCE, G6_CLK_MASK, G6_USB_40_CLK);
> +               aspeed_gfx_set_clock_source(priv, mode_width);
>                 break;
>         default:
>                 break;
> @@ -99,7 +120,7 @@ static void aspeed_gfx_crtc_mode_set_nofb(struct aspeed_gfx *priv)
>         if (err)
>                 return;
>
> -       aspeed_gfx_set_clk(priv);
> +       aspeed_gfx_set_clk(priv, m->hdisplay);
>
>  #if 0
>         /* TODO: we have only been able to test with the 40MHz USB clock. The
> diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
> index af56ffdccc65..e1a814aebc2d 100644
> --- a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
> +++ b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
> @@ -110,6 +110,7 @@ static const struct drm_mode_config_funcs aspeed_gfx_mode_config_funcs = {
>
>  static int aspeed_gfx_setup_mode_config(struct drm_device *drm)
>  {
> +       struct aspeed_gfx *priv = to_aspeed_gfx(drm);
>         int ret;
>
>         ret = drmm_mode_config_init(drm);
> @@ -118,8 +119,18 @@ static int aspeed_gfx_setup_mode_config(struct drm_device *drm)
>
>         drm->mode_config.min_width = 0;
>         drm->mode_config.min_height = 0;
> -       drm->mode_config.max_width = 800;
> -       drm->mode_config.max_height = 600;
> +
> +       switch (priv->flags & CLK_MASK) {
> +       case CLK_G6:
> +               drm->mode_config.max_width = 1024;
> +               drm->mode_config.max_height = 768;
> +               break;
> +       default:
> +               drm->mode_config.max_width = 800;
> +               drm->mode_config.max_height = 600;
> +               break;
> +       }
> +
>         drm->mode_config.funcs = &aspeed_gfx_mode_config_funcs;
>
>         return ret;
> @@ -167,6 +178,7 @@ static int aspeed_gfx_load(struct drm_device *drm)
>         priv->vga_scratch_reg = config->vga_scratch_reg;
>         priv->throd_val = config->throd_val;
>         priv->scan_line_max = config->scan_line_max;
> +       priv->flags = config->gfx_flags;
>
>         priv->scu = syscon_regmap_lookup_by_phandle(np, "syscon");
>         if (IS_ERR(priv->scu)) {
> diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_out.c b/drivers/gpu/drm/aspeed/aspeed_gfx_out.c
> index 6759cb88415a..5d5e04f15c59 100644
> --- a/drivers/gpu/drm/aspeed/aspeed_gfx_out.c
> +++ b/drivers/gpu/drm/aspeed/aspeed_gfx_out.c
> @@ -10,7 +10,19 @@
>
>  static int aspeed_gfx_get_modes(struct drm_connector *connector)
>  {
> -       return drm_add_modes_noedid(connector, 800, 600);
> +       struct aspeed_gfx *priv = container_of(connector, struct aspeed_gfx, connector);
> +       int mode_count = 0;
> +
> +       switch (priv->flags & CLK_MASK) {
> +       case CLK_G6:
> +               mode_count = drm_add_modes_noedid(connector, 1024, 768);
> +               break;
> +       default:
> +               mode_count = drm_add_modes_noedid(connector, 800, 600);
> +               break;
> +       }
> +
> +       return mode_count;
>  }
>
>  static const struct
> --
> 2.17.1
>


More information about the Linux-aspeed mailing list