[PATCH] clk/ast2600: Fix soc revision for AHB

Joel Stanley joel at jms.id.au
Thu Sep 23 09:54:49 AEST 2021


Move the soc revision parsing to the initial probe, saving the driver
from parsing the register multiple times.

Use this variable to select the correct divisor table for the AHB clock.
Before this fix the A2 would have used the A0 table.

Fixes: 2d491066ccd4 ("clk: ast2600: Fix AHB clock divider for A1")
Signed-off-by: Joel Stanley <joel at jms.id.au>
---
 drivers/clk/clk-ast2600.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/clk-ast2600.c b/drivers/clk/clk-ast2600.c
index bc3be5f3eae1..24dab2312bc6 100644
--- a/drivers/clk/clk-ast2600.c
+++ b/drivers/clk/clk-ast2600.c
@@ -51,6 +51,8 @@ static DEFINE_SPINLOCK(aspeed_g6_clk_lock);
 static struct clk_hw_onecell_data *aspeed_g6_clk_data;
 
 static void __iomem *scu_g6_base;
+/* AST2600 revision: A0, A1, A2, etc */
+static u8 soc_rev;
 
 /*
  * Clocks marked with CLK_IS_CRITICAL:
@@ -191,9 +193,8 @@ static struct clk_hw *ast2600_calc_pll(const char *name, u32 val)
 static struct clk_hw *ast2600_calc_apll(const char *name, u32 val)
 {
 	unsigned int mult, div;
-	u32 chip_id = readl(scu_g6_base + ASPEED_G6_SILICON_REV);
 
-	if (((chip_id & CHIP_REVISION_ID) >> 16) >= 2) {
+	if (soc_rev >= 2) {
 		if (val & BIT(24)) {
 			/* Pass through mode */
 			mult = div = 1;
@@ -707,7 +708,7 @@ static const u32 ast2600_a1_axi_ahb200_tbl[] = {
 static void __init aspeed_g6_cc(struct regmap *map)
 {
 	struct clk_hw *hw;
-	u32 val, div, divbits, chip_id, axi_div, ahb_div;
+	u32 val, div, divbits, axi_div, ahb_div;
 
 	clk_hw_register_fixed_rate(NULL, "clkin", NULL, 0, 25000000);
 
@@ -738,8 +739,7 @@ static void __init aspeed_g6_cc(struct regmap *map)
 		axi_div = 2;
 
 	divbits = (val >> 11) & 0x3;
-	regmap_read(map, ASPEED_G6_SILICON_REV, &chip_id);
-	if (chip_id & BIT(16)) {
+	if (soc_rev >= 1) {
 		if (!divbits) {
 			ahb_div = ast2600_a1_axi_ahb200_tbl[(val >> 8) & 0x3];
 			if (val & BIT(16))
@@ -784,6 +784,8 @@ static void __init aspeed_g6_cc_init(struct device_node *np)
 	if (!scu_g6_base)
 		return;
 
+	soc_rev = (readl(scu_g6_base + ASPEED_G6_SILICON_REV) & CHIP_REVISION_ID) >> 16;
+
 	aspeed_g6_clk_data = kzalloc(struct_size(aspeed_g6_clk_data, hws,
 				      ASPEED_G6_NUM_CLKS), GFP_KERNEL);
 	if (!aspeed_g6_clk_data)
-- 
2.33.0



More information about the Linux-aspeed mailing list