[v7 03/11] iio: adc: aspeed: Add vref config function

Billy Tsai billy_tsai at aspeedtech.com
Wed Sep 22 18:15:12 AEST 2021


Add the function to check the vref_fixed_mv and set the value to driver
data.

Signed-off-by: Billy Tsai <billy_tsai at aspeedtech.com>
---
 drivers/iio/adc/aspeed_adc.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/adc/aspeed_adc.c b/drivers/iio/adc/aspeed_adc.c
index cc808ec89a0f..aec335956310 100644
--- a/drivers/iio/adc/aspeed_adc.c
+++ b/drivers/iio/adc/aspeed_adc.c
@@ -130,7 +130,7 @@ static int aspeed_adc_read_raw(struct iio_dev *indio_dev,
 		return IIO_VAL_INT;
 
 	case IIO_CHAN_INFO_SCALE:
-		*val = data->model_data->vref_fixed_mv;
+		*val = data->vref_mv;
 		*val2 = ASPEED_RESOLUTION_BITS;
 		return IIO_VAL_FRACTIONAL_LOG2;
 
@@ -195,6 +195,17 @@ static const struct iio_info aspeed_adc_iio_info = {
 	.debugfs_reg_access = aspeed_adc_reg_access,
 };
 
+static int aspeed_adc_vref_config(struct iio_dev *indio_dev)
+{
+	struct aspeed_adc_data *data = iio_priv(indio_dev);
+
+	if (data->model_data->vref_fixed_mv) {
+		data->vref_mv = data->model_data->vref_fixed_mv;
+		return 0;
+	}
+	return 0;
+}
+
 static int aspeed_adc_probe(struct platform_device *pdev)
 {
 	struct iio_dev *indio_dev;
@@ -250,6 +261,10 @@ static int aspeed_adc_probe(struct platform_device *pdev)
 	}
 	reset_control_deassert(data->rst);
 
+	ret = aspeed_adc_vref_config(indio_dev);
+	if (ret)
+		goto vref_config_error;
+
 	if (data->model_data->wait_init_sequence) {
 		/* Enable engine in normal mode. */
 		writel(FIELD_PREP(ASPEED_ADC_OP_MODE,
@@ -298,6 +313,7 @@ static int aspeed_adc_probe(struct platform_device *pdev)
 	clk_disable_unprepare(data->clk_scaler->clk);
 clk_enable_error:
 poll_timeout_error:
+vref_config_error:
 	reset_control_assert(data->rst);
 reset_error:
 	clk_hw_unregister_divider(data->clk_scaler);
-- 
2.25.1



More information about the Linux-aspeed mailing list