[v6 06/11] iio: adc: aspeed: Support ast2600 adc.

Billy Tsai billy_tsai at aspeedtech.com
Mon Sep 13 17:53:32 AEST 2021


Make driver to support ast2600 adc device.
- Use shared reset controller
- Complete the vref configure function
- Add the model data for ast2600 adc

Signed-off-by: Billy Tsai <billy_tsai at aspeedtech.com>
---
 drivers/iio/adc/aspeed_adc.c | 101 +++++++++++++++++++++++++++++++++--
 1 file changed, 96 insertions(+), 5 deletions(-)

diff --git a/drivers/iio/adc/aspeed_adc.c b/drivers/iio/adc/aspeed_adc.c
index 0a18893c47f0..3ec4e1a2ddd3 100644
--- a/drivers/iio/adc/aspeed_adc.c
+++ b/drivers/iio/adc/aspeed_adc.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Aspeed AST2400/2500 ADC
+ * Aspeed AST2400/2500/2600 ADC
  *
  * Copyright (C) 2017 Google, Inc.
  * Copyright (C) 2021 Aspeed Technology Inc.
@@ -14,6 +14,7 @@
 #include <linux/module.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 #include <linux/spinlock.h>
 #include <linux/types.h>
@@ -81,6 +82,7 @@ struct aspeed_adc_model_data {
 struct aspeed_adc_data {
 	struct device		*dev;
 	const struct aspeed_adc_model_data *model_data;
+	struct regulator	*regulator;
 	void __iomem		*base;
 	spinlock_t		clk_lock;
 	struct clk_hw		*clk_prescaler;
@@ -217,14 +219,79 @@ static void aspeed_adc_power_down(void *data)
 	       priv_data->base + ASPEED_REG_ENGINE_CONTROL);
 }
 
+static void aspeed_adc_reg_disable(void *data)
+{
+	struct regulator *reg = data;
+
+	regulator_disable(reg);
+}
+
 static int aspeed_adc_vref_config(struct iio_dev *indio_dev)
 {
 	struct aspeed_adc_data *data = iio_priv(indio_dev);
+	int ret;
+	u32 adc_engine_control_reg_val;
 
 	if (data->model_data->vref_fixed_mv) {
 		data->vref_mv = data->model_data->vref_fixed_mv;
 		return 0;
 	}
+	adc_engine_control_reg_val =
+		readl(data->base + ASPEED_REG_ENGINE_CONTROL);
+	data->regulator = devm_regulator_get_optional(data->dev, "vref");
+	if (!IS_ERR(data->regulator)) {
+		ret = regulator_enable(data->regulator);
+		if (ret)
+			return ret;
+		ret = devm_add_action_or_reset(
+			data->dev, aspeed_adc_reg_disable, data->regulator);
+		if (ret)
+			return ret;
+		data->vref_mv = regulator_get_voltage(data->regulator);
+		/* Conversion from uV to mV */
+		data->vref_mv /= 1000;
+		if ((data->vref_mv >= 1550) && (data->vref_mv <= 2700))
+			writel(adc_engine_control_reg_val |
+				FIELD_PREP(
+					ASPEED_ADC_REF_VOLTAGE,
+					ASPEED_ADC_REF_VOLTAGE_EXT_HIGH),
+			data->base + ASPEED_REG_ENGINE_CONTROL);
+		else if ((data->vref_mv >= 900) && (data->vref_mv <= 1650))
+			writel(adc_engine_control_reg_val |
+				FIELD_PREP(
+					ASPEED_ADC_REF_VOLTAGE,
+					ASPEED_ADC_REF_VOLTAGE_EXT_LOW),
+			data->base + ASPEED_REG_ENGINE_CONTROL);
+		else {
+			dev_err(data->dev, "Regulator voltage %d not support",
+				data->vref_mv);
+			return -EOPNOTSUPP;
+		}
+	} else {
+		if (PTR_ERR(data->regulator) != -ENODEV)
+			return PTR_ERR(data->regulator);
+		data->vref_mv = 2500000;
+		of_property_read_u32(data->dev->of_node,
+				     "aspeed,int-vref-microvolt",
+				     &data->vref_mv);
+		/* Conversion from uV to mV */
+		data->vref_mv /= 1000;
+		if (data->vref_mv == 2500)
+			writel(adc_engine_control_reg_val |
+				FIELD_PREP(ASPEED_ADC_REF_VOLTAGE,
+						ASPEED_ADC_REF_VOLTAGE_2500mV),
+			data->base + ASPEED_REG_ENGINE_CONTROL);
+		else if (data->vref_mv == 1200)
+			writel(adc_engine_control_reg_val |
+				FIELD_PREP(ASPEED_ADC_REF_VOLTAGE,
+						ASPEED_ADC_REF_VOLTAGE_1200mV),
+			data->base + ASPEED_REG_ENGINE_CONTROL);
+		else {
+			dev_err(data->dev, "Voltage %d not support", data->vref_mv);
+			return -EOPNOTSUPP;
+		}
+	}
+
 	return 0;
 }
 
@@ -281,7 +348,7 @@ static int aspeed_adc_probe(struct platform_device *pdev)
 	if (IS_ERR(data->clk_scaler))
 		return PTR_ERR(data->clk_scaler);
 
-	data->rst = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+	data->rst = devm_reset_control_get_shared(&pdev->dev, NULL);
 	if (IS_ERR(data->rst)) {
 		dev_err(&pdev->dev,
 			"invalid or missing reset controller device tree entry");
@@ -298,9 +365,13 @@ static int aspeed_adc_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	adc_engine_control_reg_val =
+		readl(data->base + ASPEED_REG_ENGINE_CONTROL);
+	adc_engine_control_reg_val |=
+		FIELD_PREP(ASPEED_ADC_OP_MODE, ASPEED_ADC_OP_MODE_NORMAL) |
+		ASPEED_ADC_ENGINE_ENABLE;
 	/* Enable engine in normal mode. */
-	writel(FIELD_PREP(ASPEED_ADC_OP_MODE, ASPEED_ADC_OP_MODE_NORMAL) |
-		       ASPEED_ADC_ENGINE_ENABLE,
+	writel(adc_engine_control_reg_val,
 	       data->base + ASPEED_REG_ENGINE_CONTROL);
 
 	ret = devm_add_action_or_reset(data->dev, aspeed_adc_power_down,
@@ -368,9 +439,29 @@ static const struct aspeed_adc_model_data ast2500_model_data = {
 	.num_channels = 16,
 };
 
+static const struct aspeed_adc_model_data ast2600_adc0_model_data = {
+	.model_name = "ast2600-adc0",
+	.min_sampling_rate = 10000,
+	.max_sampling_rate = 500000,
+	.wait_init_sequence = true,
+	.scaler_bit_width = 16,
+	.num_channels = 8,
+};
+
+static const struct aspeed_adc_model_data ast2600_adc1_model_data = {
+	.model_name = "ast2600-adc1",
+	.min_sampling_rate = 10000,
+	.max_sampling_rate = 500000,
+	.wait_init_sequence = true,
+	.scaler_bit_width = 16,
+	.num_channels = 8,
+};
+
 static const struct of_device_id aspeed_adc_matches[] = {
 	{ .compatible = "aspeed,ast2400-adc", .data = &ast2400_model_data },
 	{ .compatible = "aspeed,ast2500-adc", .data = &ast2500_model_data },
+	{ .compatible = "aspeed,ast2600-adc0", .data = &ast2600_adc0_model_data },
+	{ .compatible = "aspeed,ast2600-adc1", .data = &ast2600_adc1_model_data },
 	{},
 };
 MODULE_DEVICE_TABLE(of, aspeed_adc_matches);
@@ -386,5 +477,5 @@ static struct platform_driver aspeed_adc_driver = {
 module_platform_driver(aspeed_adc_driver);
 
 MODULE_AUTHOR("Rick Altherr <raltherr at google.com>");
-MODULE_DESCRIPTION("Aspeed AST2400/2500 ADC Driver");
+MODULE_DESCRIPTION("Aspeed AST2400/2500/2600 ADC Driver");
 MODULE_LICENSE("GPL");
-- 
2.25.1



More information about the Linux-aspeed mailing list