[PATCH] ARM: dts: aspeed: Add TYAN S7106 BMC machine
Oskar Senft
osk at google.com
Wed Sep 8 05:49:31 AEST 2021
The TYAN S7106 is a server platform with an ASPEED AST2500 BMC.
Signed-off-by: Oskar Senft <osk at google.com>
---
arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts | 415 ++++++++++++++++++++
1 file changed, 415 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts
diff --git a/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts b/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts
new file mode 100644
index 000000000000..292bfb1a4bb2
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts
@@ -0,0 +1,415 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "Tyan S7106 BMC";
+ compatible = "tyan,s7106-bmc", "aspeed,ast2500";
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
+ };
+
+ memory at 80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ p2a_memory: region at 987F0000 {
+ no-map;
+ reg = <0x987F0000 0x00010000>; /* 64KB */
+ };
+
+ vga_memory: framebuffer at 9f000000 {
+ no-map;
+ reg = <0x9f000000 0x01000000>; /* 16M */
+ };
+
+ gfx_memory: framebuffer {
+ size = <0x01000000>; /* 16M */
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ identify {
+ gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
+ };
+
+ heartbeat {
+ gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+ <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+ <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+ <&adc 12>, <&adc 13>, <&adc 14>;
+ };
+
+ iio-hwmon-battery {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 15>;
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash at 0 {
+ label = "bmc";
+ status = "okay";
+ m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+
+ flash at 0 {
+ status = "okay";
+ label = "pnor";
+ m25p,fast-read;
+ };
+};
+
+&uart1 {
+ /* Rear RS-232 connector */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd1_default
+ &pinctrl_rxd1_default>;
+};
+
+&uart2 {
+ /* RS-232 connector on header */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd2_default
+ &pinctrl_rxd2_default>;
+};
+
+&uart3 {
+ /* Alternative to vuart to internally connect (route) to uart1
+ * when vuart cannot be used due to BIOS limitations.
+ */
+ status = "okay";
+};
+
+&uart4 {
+ /* Alternative to vuart to internally connect (route) to the
+ * external port usually used by uart1 when vuart cannot be
+ * used due to BIOS limitations.
+ */
+ status = "okay";
+};
+
+&uart5 {
+ /* BMC "debug" (console) UART; connected to RS-232 connector
+ * on header; selectable via jumpers as alternative to uart2
+ */
+ status = "okay";
+};
+
+&vuart {
+ status = "okay";
+};
+
+&lpc_ctrl {
+ status = "okay";
+};
+
+&p2a {
+ status = "okay";
+ memory-region = <&p2a_memory>;
+};
+
+&lpc_snoop {
+ status = "okay";
+ snoop-ports = <0x80>;
+};
+
+&adc {
+ status = "okay";
+};
+
+&vhub {
+ status = "okay";
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default
+ &pinctrl_pwm1_default
+ &pinctrl_pwm3_default
+ &pinctrl_pwm4_default>;
+
+ /* CPU fan #0 */
+ fan at 0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+ };
+
+ /* CPU fan #1 */
+ fan at 1 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+ };
+
+ /* PWM group for chassis fans #1, #2, #3 and #4 */
+ fan at 2 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+ };
+
+ fan at 3 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+ };
+
+ fan at 4 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+ };
+
+ fan at 5 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+ };
+
+ /* PWM group for chassis fans #5 and #6 */
+ fan at 6 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+ };
+
+ fan at 7 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ /* Hardware monitor with temperature sensors */
+ nct7802 at 28 {
+ compatible = "nuvoton,nct7802";
+ reg = <0x28>;
+ };
+
+ /* Also connected to:
+ * - IPMB pin header
+ * - CPU #0 memory error LED @ 0x3A
+ * - CPU #1 memory error LED @ 0x3C
+ */
+};
+
+&i2c1 {
+ /* Directly connected to PCH SMBUS #0 */
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+
+ /* BMC EEPROM, incl. mainboard FRU */
+ eeprom at 50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ };
+
+ /* Also connected to:
+ * - fan header
+ * - mini-SAS HD connector
+ * - SSATA SGPIO
+ * - via switch (BMC_SMB3_PCH_IE_SML3_EN, active low) to PCH SMBUS #3
+ */
+};
+
+&i2c3 {
+ status = "okay";
+
+ /* PSU1 FRU @ 0xA0 */
+ eeprom at 50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ };
+
+ /* PSU2 FRU @ 0xA2 */
+ eeprom at 51 {
+ compatible = "atmel,24c02";
+ reg = <0x51>;
+ };
+
+ /* PSU1 @ 0xB0 */
+ power-supply at 58 {
+ compatible = "pmbus";
+ reg = <0x58>;
+ };
+
+ /* PSU2 @ 0xB2 */
+ power-supply at 59 {
+ compatible = "pmbus";
+ reg = <0x59>;
+ };
+
+ /* Also connected to:
+ * - PCH SMBUS #1
+ */
+};
+
+&i2c4 {
+ status = "okay";
+
+ /* Connected to:
+ * - PCH SMBUS #2
+ */
+
+ /* Connected via switch to:
+ * - CPU #0 channels ABC VDDQ @ 0x80
+ * - CPU #0 channels DEF VDDQ @ 0x81
+ * - CPU #1 channels ABC VDDQ @ 0x82
+ * - CPU #1 channels DEF VDDQ @ 0x83
+ * - CPU #0 VCCIO & VMCP @ 0x52
+ * - CPU #1 VCCIO & VMCP @ 0x53
+ * - CPU #0 VCCIN @ 0xC0
+ * - CPU #0 VSA @ 0xC2
+ * - CPU #1 VCCIN @ 0xC4
+ * - CPU #1 VSA @ 0xC6
+ * - J110
+ */
+};
+
+&i2c5 {
+ status = "okay";
+
+ /* Connected via switch (PCH_BMC_SMB_SW_P) to:
+ * - mainboard FRU @ 0xAE
+ * - XDP connector
+ * - ME debug header
+ * - clock buffer @ 0xD8
+ * - i2c4 via switch (PCH_VR_SMBUS_SW_P; controlled by PCH)
+ * - PCH SMBUS
+ */
+};
+
+&i2c6 {
+ status = "okay";
+
+ /* Connected via switch (BMC_PE_SMB_EN_1_N) to
+ * bus mux (selector BMC_PE_SMB_SW_BIT[1..0]) to:
+ * - 0,0: PCIE slot 1, SMB #1
+ * - 0,1: PCIE slot 1, SMB #2
+ * - 1,0: PCIE slot 2, SMB #1
+ * - 1,1: PCIE slot 2, SMB #2
+ */
+
+ /* Connected via switch (BMC_PE_SMB_EN_2_N) to
+ * bus mux (selector BMC_PE_SMB_SW_BIT[1..0]) to:
+ * - 0,0: OCP0 (A) SMB
+ * - 0,1: OCP0 (C) SMB
+ * - 1,0: OCP1 (A) SMB
+ * - 1,1: NC
+ */
+};
+
+&i2c7 {
+ status = "okay";
+
+ /* Connected to:
+ * - PCH SMBUS #4
+ */
+};
+
+&i2c8 {
+ status = "okay";
+
+ /* Not connected */
+};
+
+&mac0 {
+ status = "okay";
+
+ use-ncsi;
+ no-hw-checksum;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+};
+
+&mac1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&ibt {
+ status = "okay";
+};
+
+&kcs1 {
+ status = "okay";
+ kcs_addr = <0xca8>;
+};
+
+&kcs3 {
+ status = "okay";
+ kcs_addr = <0xca2>;
+};
+
+&gfx {
+ status = "okay";
+ memory-region = <&gfx_memory>;
+};
+
+&gpio {
+ status = "okay";
+ gpio-line-names =
+ /*A0-A7*/ "","","IDLED_N","","","","","",
+ /*B0-B7*/ "","","","","","","","",
+ /*C0-C7*/ "","","","","ID_BUTTON","POST_COMPLETE","","",
+ /*D0-D7*/ "","","PS_PWROK","PLTRST_N","","","","",
+ /*E0-E7*/ "POWER_BUTTON","POWER_OUT","RESET_BUTTON","RESET_OUT",
+ "NMI_BUTTON","NMI_OUT","","HEARTBEAT_LED_N",
+ /*F0-F7*/ "","CLEAR_CMOS_N","","","IPMI_ALERT_LED_N","","","",
+ /*G0-G7*/ "BMC_PE_SMB_EN_1_N","BMC_PE_SMB_EN_2_N","","","","","","",
+ /*H0-H7*/ "","","","","","","","",
+ /*I0-I7*/ "","","","","","","","",
+ /*J0-J7*/ "","","","","","","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","","","","",
+ /*M0-M7*/ "","","","","","","","",
+ /*N0-N7*/ "","","","","","","","",
+ /*O0-O7*/ "","","","","","","","",
+ /*P0-P7*/ "","","","","","","","",
+ /*Q0-Q7*/ "","","","","BMC_PE_SMB_SW_BIT0","BMC_PE_SMB_SW_BIT1","","",
+ /*R0-R7*/ "","","","","","","","",
+ /*S0-S7*/ "","","","","","","","",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","","","","","","",
+ /*V0-V7*/ "","","","","","","","",
+ /*W0-W7*/ "","","","","","","","",
+ /*X0-X7*/ "","","","","","","","",
+ /*Y0-Y7*/ "","","","","","","","",
+ /*Z0-Z7*/ "","","","","","","","",
+ /*AA0-AA7*/ "","","","BMC_SMB3_PCH_IE_SML3_EN","","","","",
+ /*AB0-AB7*/ "","","","","","","","";
+};
--
2.33.0.309.g3052b89438-goog
More information about the Linux-aspeed
mailing list