[PATCH v3] ARM: dts: aspeed: rainier: Add power-config-full-load gpio

Joel Stanley joel at jms.id.au
Fri Oct 8 15:22:21 AEDT 2021


Hi Adriana,

On Tue, 5 Oct 2021 at 19:22, Adriana Kobylak <anoo at linux.ibm.com> wrote:
>
> From: Adriana Kobylak <anoo at us.ibm.com>
>
> Add the power-config-full-load described in:
> https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md#power-config-full-load
>
> The power-config-full-load gpio is designed to be used to specify how
> many power supplies the system should have, in rainier it is 2 or 4.  If
> enough power supplies fail so that the system no longer has redundancy
> (no longer n+1), the hardware will signal to the Onboard Chip Controller
> that the system may be oversubscribed, and performance may need to be
> reduced so the system can maintain it's powered on state.
>
> Signed-off-by: Adriana Kobylak <anoo at us.ibm.com>

This looks good. I think the name is much easier to understand now.

I notice you've dropped all of the other names. Do you not need them?

It would be great if one of the people you cc'd could provide a
reviewed-by before I merge this.

Cheers,

Joel

> ---
>
> v2: Update commit message.
> v3: Updated gpio name to power-config-full-load to match design doc.
>
>  arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> index 33fae8ad1305..10bde77fb847 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> @@ -1998,6 +1998,19 @@ eeprom at 51 {
>                 reg = <0x51>;
>         };
>
> +       pca_pres3: pca9552 at 60 {
> +               compatible = "nxp,pca9552";
> +               reg = <0x60>;
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               gpio-line-names =
> +                       "", "", "", "", "", "", "", "",
> +                       "", "", "", "", "", "", "power-config-full-load", "";
> +       };
> +
>         pca_pres2: pca9552 at 61 {
>                 compatible = "nxp,pca9552";
>                 reg = <0x61>;
> --
> 2.25.1
>


More information about the Linux-aspeed mailing list