[PATCH v2 4/4] usb: aspeed-vhub: support test mode feature
Greg Kroah-Hartman
gregkh at linuxfoundation.org
Tue Nov 30 22:47:04 AEDT 2021
On Tue, Nov 30, 2021 at 06:42:56PM +0800, Neal Liu wrote:
> Support aspeed usb vhub set feature to test mode.
>
> Signed-off-by: Neal Liu <neal_liu at aspeedtech.com>
> ---
> drivers/usb/gadget/udc/aspeed-vhub/dev.c | 18 ++++++++++++++----
> drivers/usb/gadget/udc/aspeed-vhub/hub.c | 22 ++++++++++++++++------
> 2 files changed, 30 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/usb/gadget/udc/aspeed-vhub/dev.c b/drivers/usb/gadget/udc/aspeed-vhub/dev.c
> index d918e8b2af3c..4462f4b73b04 100644
> --- a/drivers/usb/gadget/udc/aspeed-vhub/dev.c
> +++ b/drivers/usb/gadget/udc/aspeed-vhub/dev.c
> @@ -110,15 +110,25 @@ static int ast_vhub_dev_feature(struct ast_vhub_dev *d,
> u16 wIndex, u16 wValue,
> bool is_set)
> {
> + u32 val;
> +
> DDBG(d, "%s_FEATURE(dev val=%02x)\n",
> is_set ? "SET" : "CLEAR", wValue);
>
> - if (wValue != USB_DEVICE_REMOTE_WAKEUP)
> - return std_req_driver;
> + if (wValue == USB_DEVICE_REMOTE_WAKEUP) {
> + d->wakeup_en = is_set;
> + return std_req_complete;
>
> - d->wakeup_en = is_set;
> + } else if (wValue == USB_DEVICE_TEST_MODE) {
If you return, no need for an else statement, right?
> + val = readl(d->vhub->regs + AST_VHUB_CTRL);
> + val &= ~GENMASK(10, 8);
> + val |= VHUB_CTRL_SET_TEST_MODE((wIndex >> 8) & 0x7);
> + writel(val, d->vhub->regs + AST_VHUB_CTRL);
>
> - return std_req_complete;
> + return std_req_complete;
> + }
> +
> + return std_req_driver;
> }
>
> static int ast_vhub_ep_feature(struct ast_vhub_dev *d,
> diff --git a/drivers/usb/gadget/udc/aspeed-vhub/hub.c b/drivers/usb/gadget/udc/aspeed-vhub/hub.c
> index 93f27a745760..e52805fbdebd 100644
> --- a/drivers/usb/gadget/udc/aspeed-vhub/hub.c
> +++ b/drivers/usb/gadget/udc/aspeed-vhub/hub.c
> @@ -212,17 +212,27 @@ static int ast_vhub_hub_dev_feature(struct ast_vhub_ep *ep,
> u16 wIndex, u16 wValue,
> bool is_set)
> {
> + u32 val;
> +
> EPDBG(ep, "%s_FEATURE(dev val=%02x)\n",
> is_set ? "SET" : "CLEAR", wValue);
>
> - if (wValue != USB_DEVICE_REMOTE_WAKEUP)
> - return std_req_stall;
> + if (wValue == USB_DEVICE_REMOTE_WAKEUP) {
> + ep->vhub->wakeup_en = is_set;
> + EPDBG(ep, "Hub remote wakeup %s\n",
> + is_set ? "enabled" : "disabled");
> + return std_req_complete;
>
> - ep->vhub->wakeup_en = is_set;
> - EPDBG(ep, "Hub remote wakeup %s\n",
> - is_set ? "enabled" : "disabled");
> + } else if (wValue == USB_DEVICE_TEST_MODE) {
Same here, no need for else.
thanks,
greg k-h
More information about the Linux-aspeed
mailing list