[PATCH] media: aspeed: Fix incorrect resolution detected

Jammy Huang jammy_huang at aspeedtech.com
Tue Nov 9 20:54:53 AEDT 2021


During the process of os-installation, detected resolution's height
could be less than the correct one.

Increase min-required-count of stable signal to fix the problem.

Fixes: d2b4387f3bdf ("media: platform: Add Aspeed Video Engine driver")
Signed-off-by: Jammy Huang <jammy_huang at aspeedtech.com>
---
 drivers/media/platform/aspeed-video.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
index 5da52646b298..625a77ddb479 100644
--- a/drivers/media/platform/aspeed-video.c
+++ b/drivers/media/platform/aspeed-video.c
@@ -196,6 +196,12 @@
 #define  VE_INTERRUPT_VSYNC_DESC	BIT(11)
 
 #define VE_MODE_DETECT			0x30c
+#define  VE_MODE_DT_HOR_TOLER		GENMASK(31, 28)
+#define  VE_MODE_DT_VER_TOLER		GENMASK(27, 24)
+#define  VE_MODE_DT_HOR_STABLE		GENMASK(23, 20)
+#define  VE_MODE_DT_VER_STABLE		GENMASK(19, 16)
+#define  VE_MODE_DT_EDG_THROD		GENMASK(15, 8)
+
 #define VE_MEM_RESTRICT_START		0x310
 #define VE_MEM_RESTRICT_END		0x314
 
@@ -1199,7 +1205,12 @@ static void aspeed_video_init_regs(struct aspeed_video *video)
 	aspeed_video_write(video, VE_SCALING_FILTER3, 0x00200000);
 
 	/* Set mode detection defaults */
-	aspeed_video_write(video, VE_MODE_DETECT, 0x22666500);
+	aspeed_video_write(video, VE_MODE_DETECT,
+			   FIELD_PREP(VE_MODE_DT_HOR_TOLER, 2) |
+			   FIELD_PREP(VE_MODE_DT_VER_TOLER, 2) |
+			   FIELD_PREP(VE_MODE_DT_HOR_STABLE, 10) |
+			   FIELD_PREP(VE_MODE_DT_VER_STABLE, 10) |
+			   FIELD_PREP(VE_MODE_DT_EDG_THROD, 0x65));
 
 	aspeed_video_write(video, VE_BCD_CTRL, 0);
 }
-- 
2.25.1



More information about the Linux-aspeed mailing list